I get a -5000 access denied error every time I try to install Canoscan driver software. I tried repairing permissions, rebooted etc. It still happens. I cannot scan.
View 2 RepliesI am on a ship using a proxy server from our ISP to connect to the internet via a V-SAT satalite dome. We all have individual accounts and the guys using PC's have no problems connecting to the internet. My account also works on a P.C. However whenever i try to connect to the internet I get an Error message 403 "the following URL could not be found" "access denied". However if I disable my proxy settings reconnect to the internet then re-enable my proxy settings I am able to get on line but only for a minute or two then I get the message again. Switching off my proxies then on again always gets me on line but only for a very short period (30 secs to a minute ish).
There has been an occasional time when I have been able to access the internet for longer but only when there has been 3 or 4 people on line and browsing at the same time. I have spoken to my ISP and he thinks I may have been piggy backing onto someone elses account but was unable to offer any other advice and referred my case to someone else and I am still waiting for their response. I am running a mac book pro on snow leopard 10.6.4, using firefox (have the same problem with Safari) with proxy set to "use system settings" and my network preferences set with the given proxy server settings (192.168.10.132, port 3128). I have the same problems using WiFi or cable also.
Other info: my IP address stays the same. Although my cable IP is different from my wifi address. IPv6 is set to automatic. I think the problem lies with my mac as my given user account works on PC computers ( which I am using now!). Also there are 3 other guys with mac books who have also had the same problems although they are now at home. I have also tried changing to a guest account with similar problems although I cannot change proxy settings.
Trying to install Dreamweaver MX2004 on the only computer I own that I can still run the program on - 10.4.11 MacBook with plenty of space - and I get this error message.
Of course there is no way, other than spending countless hours of reading thousands of posts and millions of worthless nonsense, to find any help on Adobe (Price per share, $36.37 as of 12.07, "Have I resolved all your issues?").
Any idea as to what's going on? It was on another computer...I may be able to do a Firewire move of the software...if I can relaunch, but I think I removed it from the other computer already. I ran disk utility, as suggested on another forum where I trolled for about an hour.
We recently installed a mac pro running serverX 10.5.6.(2x3.2 Quad Core Intel Xeon, 16GB 800 MHZ.) I was able to connect to the server from my imac (leopard) and use ARD (V3.2.2) with no problems. Now, since I had shutdown the server for about a week I started it up the other day I am now unable to access it thru our network. On my IMac I try to access using ARD the server lists: "Access Denied". Using GO-Connect to Server I get the message "Connection Failed The server may not exist or it is not operational at this time. Check the server name or IP and your network connection and try again."
I can ping the IP address from my imac. The server is able to access the internet, so I know it's not my network. I have used Disk Utility (on the server) and reset the permissions. After hours on Apple's site and googling I am at a loss. I'm thinking it has something to do with access permissions or something got tweaked at startup (no startup progs in Accts login window) after I turned the unit off for over a week.
The Mac app store on my computers indicates that i have one update avalible, but when i try to ener the update section to start it. I get this message. Access Denied
You don't have permission to access "/L/673/1119/0s/su.itunes.apple.com.akadns.net/WebObjects/MZSoftwareUpdate.woa/ wa/viewSoftwareUpdates" on this server. Reference #18.3b4e7b5c.1401863922.ba03e3b
Info:
MacBook Pro with Retina display
I have 2 Imacs, both running OS 10.9.3. The run on a simple office ethernet wired network. We have had no problems until yesterday when suddenly one of the Imacs (Imac A) disappeared from the network. Imac A could see Imac B but not the other way round. Imac A connected to Imac B but was denied access to all the folders under the user directory on Imac B. The folders all have the no entry icon on them and if I try to open them I get the message "can't be opened because you don't have permission to see its contents" . I have checked that the sharing set up on both machines allows access read and write on items and we have been successfully sharing files for months.
I have hooked up an old Mac Pro running 10.8.6. to the network. It can see both the Imacs but when I transferred files from that machine to Imac B I got the message "can't be opened because you don't have permission to see its contents". I've checked and the permissions on this folder are set for all to read and write.
So far I have checked and repaired privileges using disk first aid.
The Imacs are both 3.1ghz Quad core i5 running 10.9.3.
Where do I get a driver for a Canon CP 800 printer. I installed OS Yosemite recently. The printer gives the code "Access denied 5000"
Info:
Mac mini, OS X Yosemite (10.10.1), mid 2011
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
I'm trying to get Prey anti theft working on my macbook. It runs manual and the site says it checks out but a test run didn't seem to work. So I checked console and found: com.apple.launchd[1] (0x10a740.cron[2330]) Could not setup Mach task special port 9: (os/kern) no access Then as I go poking thru console for further clues I notice that I'm denied access to certain logs. Even normal stuff like Itunes crash and such. I'm logged in as admin and I don't recall ever noticing this on my old imac running Panther. This one is running Leopard 10.5.8 and I'm still pretty new to it. Am I missing something here? Why am I denied access? I know it protects certain core systems but console logs?
View 2 Replies View RelatedToday I turned on my iMac and an access denied symbol show up at the loading screen. After waiting a while, it changed into a folder with an iterrogation in the middle of it and it starts to twinkle. I really don't know whats going on. Yesterday I turned off the iMac as normally and I didn't add/remove any programs or made a change on my settings.
Info:
iMac
I recently opened my system files and noticed a file called deferred install. When I tried to open it ,it told me I was denied access to this file even though I am the owner and only user of this computer.
Info:
iMac, Mac OS X (10.7.2)
I waas locked out of Sirus.ca on safari, the top of the screen says access denied and the site is inactive it waorks on my pc but not on the imac in safari is there a setting in safari I can reset to unlock things?
Info:
iMac (27-inch Mid 2011)
I simply plugged in my HP C4180 All in One after starting up my MAC. It was installed in seconds. I can printer without a problem. My problem is the scan feature. When calling up scan from the actual printer, it does NOT give an option to scan to a file. I have no installation disk for MAC so I'm at a stand still.
View 2 Replies View RelatedMy HP Photosmart 3210 all-in-one wouldn't initialize and sent error messages after I installed Snow Leopard yesterday. I went on the HP support network, which gave me a solution that sometimes works and sometimes doesn't, plus in the past I never had to take all the extra steps to scan a photo. The HP support site claims that upgrades for HP Printer devices was included with Snow Leopard. So why can't I just press the scan button like I used to?
View 20 Replies View RelatedI was wondering if anyone could tell me how I can give Symantec permission to read these files? Some of them are old IM conversations, but others I have no idea what they are. I ran a virus scan, and it skipped over quite a few things. I'd rather just be safe and have everything checked.
View 3 Replies View RelatedWhile working in Windows XP on my iMac, I believe I inadvertently removed the driver for the built in audio device - the IDT High Definition Audio CODEC. And so now I have no sound on my computer. I have tried reinstalling the driver, but at the end of the installation process it says that the device cannot start. My system automatically detects the device as new hardware when I restart the computer but even though I have removed and and tried to reinstall the the driver several times, I cannot get it to work.
When I go through the device troubleshooter, it tells me to detach the problem device and reattach it. However, the audio device is built into my mac, so that is not an option.
When trying to install x64 Boot Camp drivers on my UMB, I get an error saying that my system is not supported. There is a way to force/trick the boot camp installer into installing the drivers anyway.
View 3 Replies View RelatedI have a G5 Tower with 10.3 on it right now. I have 10.5.8 and I put in the DVD DL to install. But the primary disk drive on this computer doesn't read dual layer. So we got a dual layer driver to connect through usb. But the problem is that after we click install and it reboots it goes to the default driver... which doesn't work. So I was wondering if it was possible to change the default driver?? Or how can I get this to work?
View 1 Replies View RelatedI want to install windows vista on my macbook pro 4,1, I bought it second hand and the seller didn't have the 2 install discs. I need these after installation of windows to install the drivers, but as I don't have them is there another way of installing them?
View 2 Replies View Relatedinstructions on installing the driver for the Dell 3010cn printer on my 10.7.x
Info:
MacBook Air, Mac OS X (10.7.4)
I attempted to install a driver for my external hard drive. It was apparently the wrong thing to do, I keep getting pop ups that it's not supported. I removed the driver but it's still giving me pop ups!
Info:
iMac
I have an iso file of Windows 7 Enterprise (32 bit) that I want to install on my Mac with VMware Fusion. I went through the steps and when I clicked install, it starts then this message pops up: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now." I can click "Browse," "OK," or "Cancel".
Macbook Pro
Mac OS X
Version 10.5.8
2.4 GHz Intel Core 2 Duo
4 GB Memory
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
I get this error during the Windows 7 setup, right after I begin the installation (occurs in the middle of "step 1" of the two steps that Windows organizes the installation into)
Does anybody have a solution for this? I'm putting in the most recent Windows 7 release onto my mac, have a partition, etc. etc.....nothing seems to be working. Just seeing if anybody has a fix. Tomorrow (I've been trying to do this for a week and am going absolutely nuts) I'm going to but the Windows 7 iso onto my USB and see if that works grumble grumble
I have the edu version of Windows 7 64 bit home. I'm using Fusion 3 and am trying to install Windows 7 as a new machine. I'm running from the ISO Win 7 file that I dl'd from here, which is 5.43 gb in size.
When I start the new machine process, it begins the installation but then hangs with the following error message: A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.
I an getting an error saying driver information not available (for a supported printer) even though it sees it attached to USB and I have installed the drivers on the computer.
Info:
MacBook Air, Mac OS X (10.7.3)
While trying to fix my disabled USB ports on my MBP, (Installing some sort of USB driver that wasn't made for my specific OS, which is 10.7.4, which came from the apple website.) I rebooted my computer and I notice that once the loggin screen shows up the cursor won't budge. Then I try hitting Enter on my mac and the arrow keys a little. Nothing. Then I try using every key on the keyboard. Absolutely nothing. Tried resetting the PRAM, SMC, AND tried using Safe Boot. Nothing. At this point I wanted to smash my computer or smash something technology related. The only thing that works on my computer now is the little slim of hope that I call Windows 7 which I am posting this from.Is there ANYTHING I can do to enable my Trackpad and Keyboard again?
Info:
MacBook Pro, Mac OS X (10.7.4)
My Canon MF8380 had been working fine with my MacBook Pro (printing wirelessly), and all of a sudden today I am getting an error that says: "Canon CMFP Printer Driver: Printer is not responding. Check the printer power and connection, and then try sending printing job again."
I have tried the basics - turning off and on the printer, rebooting the MacBook Pro, printing from different applications, making sure Job Accounting is not checked in setup, seeing that the driver seems like it's acknowledged, checking and unchecking sharing prefs.
Info:
Mac OS X (10.7.4)
I understand that when installing ram in the new 2008 mac pro. You can achieve a slight increase in speed. By installing your modules in sets of four, of the same size. Does this mean that once I have my first set of four. That all additional sets of for have to be the same type of the first. Or can I mix and match sets of four. Will 4 1-gig chips, and a second set consisting of 4 2-gig chips. Still allow me to take advantage of the speed increase of 256-bit access.
View 1 Replies View RelatedI wanted to see what all the fuss was about with Macs, so I recently purchased a real cheap ibook G3 (the clamshell one), which came with no software on it but still has sound(?) Anyway, when I turn the laptop on, there is a startup sound, and then a little picture of a folder with a question mark on it. I leapt into action and bought a copy of OS X 10.0.3, which I assume is old enough to work (this machine is an ibook M2453 366mhz 320mb ram 9gb notebook), and I am not sure if that will even run anything like osx but I wanted to try. So I boot the laptop up, I get a little icon of an old mac and a little cd spinning in the upper left hand corner, it sounds like it is loading things from the cd, and nothing. I let it do that for almost an hour and nothing happened.
View 2 Replies View RelatedI have a problem with installing the 10.7 upgrade, it basically keeps showing the below error
Info:MacBookPro, Mac OS X (10.6.8)
