Today I turned on my iMac and an access denied symbol show up at the loading screen. After waiting a while, it changed into a folder with an iterrogation in the middle of it and it starts to twinkle. I really don't know whats going on. Yesterday I turned off the iMac as normally and I didn't add/remove any programs or made a change on my settings.
Info:
iMac
I recently opened my system files and noticed a file called deferred install. When I tried to open it ,it told me I was denied access to this file even though I am the owner and only user of this computer.
Info:
iMac, Mac OS X (10.7.2)
I waas locked out of Sirus.ca on safari, the top of the screen says access denied and the site is inactive it waorks on my pc but not on the imac in safari is there a setting in safari I can reset to unlock things?
Info:
iMac (27-inch Mid 2011)
We recently installed a mac pro running serverX 10.5.6.(2x3.2 Quad Core Intel Xeon, 16GB 800 MHZ.) I was able to connect to the server from my imac (leopard) and use ARD (V3.2.2) with no problems. Now, since I had shutdown the server for about a week I started it up the other day I am now unable to access it thru our network. On my IMac I try to access using ARD the server lists: "Access Denied". Using GO-Connect to Server I get the message "Connection Failed The server may not exist or it is not operational at this time. Check the server name or IP and your network connection and try again."
I can ping the IP address from my imac. The server is able to access the internet, so I know it's not my network. I have used Disk Utility (on the server) and reset the permissions. After hours on Apple's site and googling I am at a loss. I'm thinking it has something to do with access permissions or something got tweaked at startup (no startup progs in Accts login window) after I turned the unit off for over a week.
I am on a ship using a proxy server from our ISP to connect to the internet via a V-SAT satalite dome. We all have individual accounts and the guys using PC's have no problems connecting to the internet. My account also works on a P.C. However whenever i try to connect to the internet I get an Error message 403 "the following URL could not be found" "access denied". However if I disable my proxy settings reconnect to the internet then re-enable my proxy settings I am able to get on line but only for a minute or two then I get the message again. Switching off my proxies then on again always gets me on line but only for a very short period (30 secs to a minute ish).
There has been an occasional time when I have been able to access the internet for longer but only when there has been 3 or 4 people on line and browsing at the same time. I have spoken to my ISP and he thinks I may have been piggy backing onto someone elses account but was unable to offer any other advice and referred my case to someone else and I am still waiting for their response. I am running a mac book pro on snow leopard 10.6.4, using firefox (have the same problem with Safari) with proxy set to "use system settings" and my network preferences set with the given proxy server settings (192.168.10.132, port 3128). I have the same problems using WiFi or cable also.
Other info: my IP address stays the same. Although my cable IP is different from my wifi address. IPv6 is set to automatic. I think the problem lies with my mac as my given user account works on PC computers ( which I am using now!). Also there are 3 other guys with mac books who have also had the same problems although they are now at home. I have also tried changing to a guest account with similar problems although I cannot change proxy settings.
The Mac app store on my computers indicates that i have one update avalible, but when i try to ener the update section to start it. I get this message. Access Denied
You don't have permission to access "/L/673/1119/0s/su.itunes.apple.com.akadns.net/WebObjects/MZSoftwareUpdate.woa/ wa/viewSoftwareUpdates" on this server. Reference #18.3b4e7b5c.1401863922.ba03e3b
Info:
MacBook Pro with Retina display
Trying to install Dreamweaver MX2004 on the only computer I own that I can still run the program on - 10.4.11 MacBook with plenty of space - and I get this error message.
Of course there is no way, other than spending countless hours of reading thousands of posts and millions of worthless nonsense, to find any help on Adobe (Price per share, $36.37 as of 12.07, "Have I resolved all your issues?").
Any idea as to what's going on? It was on another computer...I may be able to do a Firewire move of the software...if I can relaunch, but I think I removed it from the other computer already. I ran disk utility, as suggested on another forum where I trolled for about an hour.
I have 2 Imacs, both running OS 10.9.3. The run on a simple office ethernet wired network. We have had no problems until yesterday when suddenly one of the Imacs (Imac A) disappeared from the network. Imac A could see Imac B but not the other way round. Imac A connected to Imac B but was denied access to all the folders under the user directory on Imac B. The folders all have the no entry icon on them and if I try to open them I get the message "can't be opened because you don't have permission to see its contents" . I have checked that the sharing set up on both machines allows access read and write on items and we have been successfully sharing files for months.
I have hooked up an old Mac Pro running 10.8.6. to the network. It can see both the Imacs but when I transferred files from that machine to Imac B I got the message "can't be opened because you don't have permission to see its contents". I've checked and the permissions on this folder are set for all to read and write.
So far I have checked and repaired privileges using disk first aid.
The Imacs are both 3.1ghz Quad core i5 running 10.9.3.
Where do I get a driver for a Canon CP 800 printer. I installed OS Yosemite recently. The printer gives the code "Access denied 5000"
Info:
Mac mini, OS X Yosemite (10.10.1), mid 2011
I'm trying to get Prey anti theft working on my macbook. It runs manual and the site says it checks out but a test run didn't seem to work. So I checked console and found: com.apple.launchd[1] (0x10a740.cron[2330]) Could not setup Mach task special port 9: (os/kern) no access Then as I go poking thru console for further clues I notice that I'm denied access to certain logs. Even normal stuff like Itunes crash and such. I'm logged in as admin and I don't recall ever noticing this on my old imac running Panther. This one is running Leopard 10.5.8 and I'm still pretty new to it. Am I missing something here? Why am I denied access? I know it protects certain core systems but console logs?
View 2 Replies View RelatedI get a -5000 access denied error every time I try to install Canoscan driver software. I tried repairing permissions, rebooted etc. It still happens. I cannot scan.
View 2 Replies View RelatedI just bought a macbook pro 15" and I noticed something strange. I installed Skype application and the icon is strange and different on my dock application folder. Why does it not show Skype's normal icon? Check pic for more details.
View 17 Replies View RelatedI am unable to fully access an application or even open a folder. If I press F10, I can see the folder for example but I cannot click on it. I have shut the system off and restarted and still no change.
Info:
iMac, Mac OS X (10.7.3)
My computer froze while I was doing homework so I tried to restart it and when I did, It doesn't show the apple logo but rather a File Folder with a ? Symbol! I tried reselecting the hard drive but it didn't show! I CANNOT lose my information on my harddrive cause I have very IMPORTANT work on there! I have mac OS X Lion! So I don't have a start up disk for that and the one i have is stuck in my computer right now!
Info:
MacBook Pro, Mac OS X (10.7.2)
whenever I even go near the Downloads folder, Finder crashes. This happens whether I try to access it from Users -> (username) or if I am trying to attach something to an email, in list view. It is really irritating me, because I put most of my stuff into this folder, and cannot access it!
Info:
iMac, Mac OS X (10.7.4), iMac 27"
Just came back from the Genius Bar at Apple Amsterdam. Both iTunes and iPhoto had problems launching and libraries were not loading. Ruled out hardware problems so they tried installing OS Snow Leopard over my 10.5.8 in a way to keep my documents safe. All went well until halfway it said it couldn't install succesfully. Made a new appointment for in 3 days from now. They would then overwrite the current OS with the new one so i should go home and make sure to back up all my files in the meantime. Problem is that when i came home and started my laptop i got a blank/white screen with a blinking documents folder symbol with a question mark in it! Does anybody know what it means and will i be able to ever make a back up of my documents?
Info:
MacBook, Mac OS X (10.5.8)
I'm using Tiger
so I wanted to change my documents icon to a really fancy icon so I found this site called [URL] and followed the steps to change it into a suitcase of some sort. But my documents wouldn't open, and a dialog box popped up and said something about how no application can be run with this and it had the option to choose an application. So I deleted the suitcase, and now the folder has turned into a UNIX file which is not accessible.
I've been asked to upgrade the disk of a macbook pro (MacOsX 10.5.2), so I cloned it with superduper and I've switched the old hard disk with he new one.
After I've started the system everything but Entourage worked, so I checked the disk, and I found that Documents folder has disappeared, and I found an empty plain text file instead of it. Documents stack in the dock now shows a curious question point icon, and there's no trace of any of the file and folder that were inside of Documents.
I've put the original disk in the MacBook Pro, but I found that it was identical to his clone.
I've also tried to use Nucleus Kernel and Boomerang Data Recovery to find all the lost stuff, but they found nothing.
I don't know what to do, I have to recover all the data, mails and the other stuff which was inside, but I don't know if it is possible and how could this be done.
In Windows I had to recover data from deleted folders, even from corrupted partitions, and I succeded in finding the files I was looking for, sometimes I had to rename the files I found, but I succeded in recovering client's data nearly everytime.
Now I'm very confused, as I've always thought this kind of accidents could not happen in a Mac enviroment.
What can I do? Is there any kind of data recovery service able to restore Documents directory from its file status?
I purchased a new optical drive from a reputable mac seller in my area and installed it due to the old one not reading disks anymore. I was very careful and followed the instructions according to an article I found on [URL]I found on xlr8your macHowever, now when I start the computer up, I get the question mark folder. I've done a little research but thought I' check the Macrumors forum before I spent all day on this. The store where I bought the new optical drive from doesn't open for another few hours so, here I am.
View 4 Replies View RelatedIt appears that the Library folder that is in the Home Folder (e.g./Users/Home/Liberary)has been made invisible in OS 10.7.x. However I have seen it because after converting samples Logic showed me the folder and its contents. I would very much like to move the samples from their present location in this folder on the startup disk to the EXS 24 samples folder on the external RAID array that is dedicated to this purpose - - but I don't know how to make the Library folder visible.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.4), 24GB RAM/MOTU 2408 mk3 audio interface
I have an untitled cd in my finder under devices. My cd/dvd player will not work since it has been there. I cannot drag it to trash or anywhere else. I've found a few post online but none seem to help. Why is it there and how do I get rid of it? Once I do get rid of it, will it allow my cd/dvd to work again?
Info:
iMac, Mac OS X (10.6.8)
I have downloaded iwatermark. I can add text, but I can't seem to put a copyright symbol (C in circle),anyone know how? I tried to copy and paste one from Word, but it wont paste into the text box.
Info:
Mac OS X (10.7.3)
I have let it run 24 hours and still would not restart. The only way i can shut it off is holding down power button. Its a pain to have to do this any time the imac needs to restart. The screen just shows the swirling wait circle and nothing ever happens.
Info:
iMac, Mac OS X (10.7.2)
My keyboard isn't working properly, when I press the letter 'o' it shows the symbols 'oty' and when I press 'N' it brings up a new page of whatever I'm on. Also when I press 'L' it shows the copyright symbol followed by a dot and what looks the the letter 'L' floating on its side. Can someone please help with this? I'm just so confused and been trying all sorts of things for over two hours now.
Info:
iMac (21.5-inch Mid 2011)
Recently the ALT +2 and ALT +3 functions (to insert the euro and hashtag symbols, respectively) have stopped working on my keyboard. I have looked into various preferences and settings but have been unable to sort this out.I'm on an iMac running Lion 10.7.3 and a wired Euro keyboard with keypad.
Info:
iMac, Mac OS X (10.7.3), Time Capsule
When I try to start my new iMac, the apple symbol appears with the timer and doesn't do anything else. Been through the manual trying all suggestions in there, new with apple macs - 2 weeks old and a start-up problem? Not impressed!!
Info:
iMac
My iMac, which was new Christmas 2011, has developed a strange fault. If the computer is left idle for any length of time, I then find that there is no sound and the speaker symbol at the top of the screen has disappeared. Sound is only regained by rebooting.
Info:
iMac
My iMac, which was new Christmas 2011, has developed a strange fault. If the computer is left idle for any length of time, I then find that there is no sound and the speaker symbol at the top of the screen has disappeared. Sound is only regained by rebooting.
Info:
iMac
My wife's bluetooth just disappeared. The Bluetooth symbol on the menu bar is gray with a wavy line. Ran out and got a bluetooth adapter and it still isn't recognized. Bluetooth was working great last night. Not sure what my wife did.
Info:
iMac, Mac OS X (10.6.7)
Mouse is flickering and MC keeps auto typing a single symbol continuously in the search engine
View 6 Replies View Related
