Windows On Mac :: 7 Installing / Drive Device Driver Is Missing?
May 17, 2009
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
I get this error during the Windows 7 setup, right after I begin the installation (occurs in the middle of "step 1" of the two steps that Windows organizes the installation into)
Does anybody have a solution for this? I'm putting in the most recent Windows 7 release onto my mac, have a partition, etc. etc.....nothing seems to be working. Just seeing if anybody has a fix. Tomorrow (I've been trying to do this for a week and am going absolutely nuts) I'm going to but the Windows 7 iso onto my USB and see if that works grumble grumble
I have the edu version of Windows 7 64 bit home. I'm using Fusion 3 and am trying to install Windows 7 as a new machine. I'm running from the ISO Win 7 file that I dl'd from here, which is 5.43 gb in size.
When I start the new machine process, it begins the installation but then hangs with the following error message: A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.
While working in Windows XP on my iMac, I believe I inadvertently removed the driver for the built in audio device - the IDT High Definition Audio CODEC. And so now I have no sound on my computer. I have tried reinstalling the driver, but at the end of the installation process it says that the device cannot start. My system automatically detects the device as new hardware when I restart the computer but even though I have removed and and tried to reinstall the the driver several times, I cannot get it to work.
When I go through the device troubleshooter, it tells me to detach the problem device and reattach it. However, the audio device is built into my mac, so that is not an option.
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
have only just started the journey of installing a VM on my iMac and have hit what looks like a common problem but I cant see a common answer!
I've got an iMac running OS X (10.6.4 to be precise) with a 3GHz Intel Core 2 Duo processor, 4GB RAM and 500G HDD.
I installed Parallels 5 preferring it over bootcamp because you can switch over without having to reboot.
I've then download Windows 7 64bit version from the Microsoft store and run through the installation / creation of a new vm in parallels.
All seemed to be fine for the first 45 seconds but then I've hit a pop up called "Load Driver" saying "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK" - on clicking OK out of that pop up - I have a choice to BROWSE, RESCAN to find the right "driver".
My question is - what is the right driver? what device is the driver needed for? I've searched around and most suggestions point towards going into device manager - well - I'm still on STAGE 1 of the install of Windows 7 where it says its "Collecting information".
When I downloaded Windows 7 from the Microsoft store it provided 2 files:
Windows7_Professional_ISO_64bit.iso and bootsect.exe
but no other files. I stored it in Documents/Windows7 files.
Apologies if you've had this question a thousand time but could someone kindly suggest how I find out what device drivers I need?
I have a USB device with a windows driver and application that works fine under bootcamp. No native OSX drivers available for this device. Will I be able to install the drivers and run using Parallels?
Windows 7 has been awesome so far, but there are still the occasional driver issues. What I'm having trouble with now is firewire. I used to use HFS Explorer to access my external (HFS formatted) hard drive but it no longer shows up in HFS Explorer. Windows doesn't even make the "device connected" sound when I turn it on (yes I'm running HFS Explorer in admin mode/Vista compatibility). Pretty sure it's a firewire driver issue, but I have no clue who makes the firewire for my early 08 MBP.
When trying to install x64 Boot Camp drivers on my UMB, I get an error saying that my system is not supported. There is a way to force/trick the boot camp installer into installing the drivers anyway.
I want to install windows vista on my macbook pro 4,1, I bought it second hand and the seller didn't have the 2 install discs. I need these after installation of windows to install the drivers, but as I don't have them is there another way of installing them?
I have put the wrong driver on my IMac running OSX 10.7.3 and need to go to an older driver. I've tried to find out where the drivers are but no sucess. There is a driver for XBox 360 game controllers that I loaded and it appears in System Preferences but controller hardware is not recognized by the driver even though the System profiler see's the XBox 360 controller listed under USB devices. I'm trying to remove the current driver and load an older driver which some people say works. I can't find any system file with the name XBox 360 in it on my computer but when I try to install an older version of the driver it doesn't allow me because it says I have a newer version on my drive. So in general, how do you remove non functioning drivers?
Info: iMac, Mac OS X (10.7.3), Quad core I7, 8GB RAM, 27" screen
Running a 2010 MBP Core i5 2.4GHz. I had Windows 7 originally installed. Gave me wireless problems and I gave up. Erased the partition. Installed Windows XP and everything was fine.
I got a new copy of W7 Professional x64. I installed it "over" the existing XP, though it erased the partition anyways (I don't care about that).The new 7 install has been giving me the same wireless problems. I downloaded and installed the Broadcom driver. Gave me a BSOD and restarted the computer. Now I have a BSOD on start up, too. On the OSX side of things, it no longer shows any Boot Camp hard drive. It doesn't recognize it at all. Though when I hold the option key on boot, it still shows the Windows install.
1. How do I fix the BSOD problem? (All caused by installing the driver)
2. Where the heck is the Boot Camp hard drive/partition?
I'm having some huge problems. I have an .iso of Windows 7 Ultimate but my whole problem is that my macbooks dvd-rom drive crapped out on me a year ago so no burning no reading and Disc Utility wont let me restore the iso onto an external hard drive.
Does anyone have any idea what I could do to fix this? Is there a way I can put the image onto the hard drive at all?
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
Since two days ago, Wed Sept 9, my iMac's internal speakers aren't working.Checking the Sound Preferences, under Output, there is only Headphone. Internal Spkrs is missing.
I recently installed Windows 7 Ultimate through VirtualBox, but I wasn't crazy about the experience and I have a Windows 7 laptop. I used the uninstall tool from the downloaded DMG file, but my 20GB of hard drive are missing still. Is the space still tied up somewhere or is something just like a restart needed? (I've been using my Mac all day so I haven't had the change to try a reboot)
I've used my Windows 7 machine to make a USB bootable (command prompt, etc) using these instructions. [URL]. And I've copied all of the Win7 files off of the installation DVD on to the jumpdrive. I've prepared my Mac for installation by installed rEFIt and all the other instructions on the following tutorial: [URL]. So when I have my USB drive plugged in to my MBP and I start it up, holding down option to bring up rEFIt, the USB drive doesn't show up to begin installation.
I have a G5 Tower with 10.3 on it right now. I have 10.5.8 and I put in the DVD DL to install. But the primary disk drive on this computer doesn't read dual layer. So we got a dual layer driver to connect through usb. But the problem is that after we click install and it reboots it goes to the default driver... which doesn't work. So I was wondering if it was possible to change the default driver?? Or how can I get this to work?
I attempted to install a driver for my external hard drive. It was apparently the wrong thing to do, I keep getting pop ups that it's not supported. I removed the driver but it's still giving me pop ups!
I have an Aluminum MacBook, is it possible to install Windows with boot camp from a thumb drive? I have access to the ISOs I need (from MSDNAA), but I ran out of CDR/DVDRs. Ideally I would extract the ISO onto the thumb drive and have it behave the same as if it was a CD, is it that simple or is there something else I will need to do?
I have an iso file of Windows 7 Enterprise (32 bit) that I want to install on my Mac with VMware Fusion. I went through the steps and when I clicked install, it starts then this message pops up: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now." I can click "Browse," "OK," or "Cancel".
Macbook Pro Mac OS X Version 10.5.8 2.4 GHz Intel Core 2 Duo 4 GB Memory
I get a -5000 access denied error every time I try to install Canoscan driver software. I tried repairing permissions, rebooted etc. It still happens. I cannot scan.
While trying to fix my disabled USB ports on my MBP, (Installing some sort of USB driver that wasn't made for my specific OS, which is 10.7.4, which came from the apple website.) I rebooted my computer and I notice that once the loggin screen shows up the cursor won't budge. Then I try hitting Enter on my mac and the arrow keys a little. Nothing. Then I try using every key on the keyboard. Absolutely nothing. Tried resetting the PRAM, SMC, AND tried using Safe Boot. Nothing. At this point I wanted to smash my computer or smash something technology related. The only thing that works on my computer now is the little slim of hope that I call Windows 7 which I am posting this from.Is there ANYTHING I can do to enable my Trackpad and Keyboard again?
I am using a MBP 17" (2010 model). The trackpad functions very well under Mac OS/X.However, under Windows Vista 64-bit, it does not behave as if it were under Mac OS. For example, even I did not click on the trackpad, it did it by itself. Is it a driver problem or setting problem? I know that under bootcamp, we can change the trackpad settings. If it is the latter case, could anybody please let me know the configurations/settings that allow the trackpad to behave exactly the same it does under Mac OS/X?
I have a Macbook Pro 15" , C2D 2.33ghz. I have the 7100 version of Windows 7 and everything worked perfectly except for the sound.
No matter which bootcamp driver I try or even Realtek's own vista one nothing works.
I downloaded the bootcamp 2.1 drivers and everything installed correctly , including the realtek ones. All the hardware looks fine in device manager but I dont hear anything out.
Should the default be speakers? It seems that it keeps the driver as microsofts own and it doesnt say anything about realtek. Could that be the problem?
I did not try the microphone jack yet but will in a few minutes.
Even if there is a hack , Im willing to try it. What is the exact audio chipset on this model of macbook pro?
I just recently upgraded to SL and have a few issues. I am still kinda new to OSX even though I've had an iMac for a a few years. I mainly was using Windows 7 on Bootcamp, but now want to really get to know OSX.
First, in Leopard there were icons on the desktop for my MAC hard drive and my Windows hard drive. But after installing SL they aren't on there. I liked the idea of having them on the desktop for quick access. Can someone let me know how to get them back on the desktop?
Second I have a Razer DeathAdder mouse I use. I have the latest OSX drivers installed. This problem I've had with Leopard and Snow Leopard is that even though I've set the tracking speed under System Preferences, after rebooting the tracking goes all the way back to down the the lowest setting. I've tried setting it in the DeathAdder's software and in the regular preferences in OSX but after reboot it always goes back down. It is annoying cause it tracks way to slow and I have to manually up it a few notches whenever I boot up.
I have an old macbook (2 years ago). After I installed windows 7, there is no sound in the window system. Did anyone know what I can do to solve this problems?
