Software :: Access Denied Error - URL Could Not Be Found
Oct 15, 2010
I am on a ship using a proxy server from our ISP to connect to the internet via a V-SAT satalite dome. We all have individual accounts and the guys using PC's have no problems connecting to the internet. My account also works on a P.C. However whenever i try to connect to the internet I get an Error message 403 "the following URL could not be found" "access denied". However if I disable my proxy settings reconnect to the internet then re-enable my proxy settings I am able to get on line but only for a minute or two then I get the message again. Switching off my proxies then on again always gets me on line but only for a very short period (30 secs to a minute ish).
There has been an occasional time when I have been able to access the internet for longer but only when there has been 3 or 4 people on line and browsing at the same time. I have spoken to my ISP and he thinks I may have been piggy backing onto someone elses account but was unable to offer any other advice and referred my case to someone else and I am still waiting for their response. I am running a mac book pro on snow leopard 10.6.4, using firefox (have the same problem with Safari) with proxy set to "use system settings" and my network preferences set with the given proxy server settings (192.168.10.132, port 3128). I have the same problems using WiFi or cable also.
Other info: my IP address stays the same. Although my cable IP is different from my wifi address. IPv6 is set to automatic. I think the problem lies with my mac as my given user account works on PC computers ( which I am using now!). Also there are 3 other guys with mac books who have also had the same problems although they are now at home. I have also tried changing to a guest account with similar problems although I cannot change proxy settings.
View 2 Replies
ADVERTISEMENT
Dec 7, 2009
Trying to install Dreamweaver MX2004 on the only computer I own that I can still run the program on - 10.4.11 MacBook with plenty of space - and I get this error message.
Of course there is no way, other than spending countless hours of reading thousands of posts and millions of worthless nonsense, to find any help on Adobe (Price per share, $36.37 as of 12.07, "Have I resolved all your issues?").
Any idea as to what's going on? It was on another computer...I may be able to do a Firewire move of the software...if I can relaunch, but I think I removed it from the other computer already. I ran disk utility, as suggested on another forum where I trolled for about an hour.
View 3 Replies
View Related
Sep 14, 2009
I get a -5000 access denied error every time I try to install Canoscan driver software. I tried repairing permissions, rebooted etc. It still happens. I cannot scan.
View 2 Replies
View Related
Jan 10, 2009
We recently installed a mac pro running serverX 10.5.6.(2x3.2 Quad Core Intel Xeon, 16GB 800 MHZ.) I was able to connect to the server from my imac (leopard) and use ARD (V3.2.2) with no problems. Now, since I had shutdown the server for about a week I started it up the other day I am now unable to access it thru our network. On my IMac I try to access using ARD the server lists: "Access Denied". Using GO-Connect to Server I get the message "Connection Failed The server may not exist or it is not operational at this time. Check the server name or IP and your network connection and try again."
I can ping the IP address from my imac. The server is able to access the internet, so I know it's not my network. I have used Disk Utility (on the server) and reset the permissions. After hours on Apple's site and googling I am at a loss. I'm thinking it has something to do with access permissions or something got tweaked at startup (no startup progs in Accts login window) after I turned the unit off for over a week.
View 1 Replies
View Related
Jun 3, 2014
The Mac app store on my computers indicates that i have one update avalible, but when i try to ener the update section to start it. I get this message. Access Denied
You don't have permission to access "/L/673/1119/0s/su.itunes.apple.com.akadns.net/WebObjects/MZSoftwareUpdate.woa/ wa/viewSoftwareUpdates" on this server. Reference #18.3b4e7b5c.1401863922.ba03e3b
Info:
MacBook Pro with Retina display
View 2 Replies
View Related
Jul 1, 2014
I have 2 Imacs, both running OS 10.9.3. The run on a simple office ethernet wired network. We have had no problems until yesterday when suddenly one of the Imacs (Imac A) disappeared from the network. Imac A could see Imac B but not the other way round. Imac A connected to Imac B but was denied access to all the folders under the user directory on Imac B. The folders all have the no entry icon on them and if I try to open them I get the message "can't be opened because you don't have permission to see its contents" . I have checked that the sharing set up on both machines allows access read and write on items and we have been successfully sharing files for months.
I have hooked up an old Mac Pro running 10.8.6. to the network. It can see both the Imacs but when I transferred files from that machine to Imac B I got the message "can't be opened because you don't have permission to see its contents". I've checked and the permissions on this folder are set for all to read and write.
So far I have checked and repaired privileges using disk first aid.
The Imacs are both 3.1ghz Quad core i5 running 10.9.3.
View 1 Replies
View Related
Dec 10, 2014
Where do I get a driver for a Canon CP 800 printer. I installed OS Yosemite recently. The printer gives the code "Access denied 5000"
Info:
Mac mini, OS X Yosemite (10.10.1), mid 2011
View 1 Replies
View Related
Jun 8, 2010
I'm trying to get Prey anti theft working on my macbook. It runs manual and the site says it checks out but a test run didn't seem to work. So I checked console and found: com.apple.launchd[1] (0x10a740.cron[2330]) Could not setup Mach task special port 9: (os/kern) no access Then as I go poking thru console for further clues I notice that I'm denied access to certain logs. Even normal stuff like Itunes crash and such. I'm logged in as admin and I don't recall ever noticing this on my old imac running Panther. This one is running Leopard 10.5.8 and I'm still pretty new to it. Am I missing something here? Why am I denied access? I know it protects certain core systems but console logs?
View 2 Replies
View Related
May 2, 2012
Today I turned on my iMac and an access denied symbol show up at the loading screen. After waiting a while, it changed into a folder with an iterrogation in the middle of it and it starts to twinkle. I really don't know whats going on. Yesterday I turned off the iMac as normally and I didn't add/remove any programs or made a change on my settings.
Info:
iMac
View 2 Replies
View Related
Apr 12, 2012
I recently opened my system files and noticed a file called deferred install. When I tried to open it ,it told me I was denied access to this file even though I am the owner and only user of this computer.
Info:
iMac, Mac OS X (10.7.2)
View 11 Replies
View Related
Jun 9, 2012
I waas locked out of Sirus.ca on safari, the top of the screen says access denied and the site is inactive it waorks on my pc but not on the imac in safari is there a setting in safari I can reset to unlock things?
Info:
iMac (27-inch Mid 2011)
View 1 Replies
View Related
Jul 28, 2010
While everyone has been complaining about the lack of this..lack of that..I found a glaring error on 's website. Here it is. "The integrated memory controller, along with fast DDR3 ECC SDRAM at either 1066GHz or 1333GHz, gives Mac Pro an increase in memory bandwidth over previous generations." Yes, I'm a grammar and spelling Nazi. Well, my friends do say I'd make an excellent editor.
View 5 Replies
View Related
Dec 6, 2014
When rebooting my computer I got this 'library not found' error...I figured my external hard where all my iTunes stuff is kept hadn't come online yet. That's happened before. Nope. Now I can't seem to find the current library file. Also, strangely, these files were in the trash:
iTunes Library Extras.itdb
iTunes Library Genius.itdb
Info:
iPhone 5, iOS 6
View 2 Replies
View Related
Apr 22, 2012
It happens all the time, and I don't know how to make YouTube work. What can I do?
View 4 Replies
View Related
Feb 27, 2010
When I attempt to songs in itunes on my computer I get an error message that says: "The song < Name of Song Here> could not be used because the original file could not be found. Would you like to locate it?" All the songs are listed but can not access them.
My OS: Vista
Have tried:
System restore
restoring via back-up
Uninstalling then re-installing iTunes
Rebooting computer
Have approx 1300 songs only 60 are accessible. Songs are not available on my Itouch. Itouch syncs but no songs there. Issue happened on 2/25 after my wife bought a song from iStore.
View 3 Replies
View Related
Feb 28, 2012
After I moved my iTunes media and library back from an external drive back to my new laptop (with a larger drive), I can't open iTunes. I get this message "The iTunes Library file cannot be found or created. The default location for this file is in the iTunes folder in the "Music" folder. The only option it gives is to click "OK" and iTunes shuts down. I tried reinstalling iTunes but the problem persists. I've checked and my iTunes Library.itl file is in its proper location.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 2, 2014
I've been using a website regularly for a while but now when go onto it it says the server cannot be found. I've tried changing the DNS but that didn't work.
Info:
MacBook Pro with Retina display, OS X Server
View 1 Replies
View Related
May 10, 2009
I am very upset and am ready to buy a different computer for my personal use than my iMac 20". I am running OS X 10.5.6 and it's a 2.4 GHz Intel Core 2 Duo with 2 GB 667 MHz DDR2 SDRAM and the 320 GB HD. My DVD/CD won't accept/load the CD/DVD at all and the real kicker of it is is that the machine JUST went off warranty. I think the CD/DVD is the Mitsubishi one. Any help would be GREAT.
I have been getting the error message:
There was an initialization error.
A valid DVD drive could not be found [-70012].
I have tried to reset the parameters.
I have tried to restart the computer and then wait for a few moments.
I have tried to use the hold the mouse down and restart.
I downloaded the Tray Eject applescript and don't know how to run that.
I have NOT tried the shut off and unplug everything but will and see if that works.
View 7 Replies
View Related
Jun 29, 2012
The backup disk image 'Volumes/Data/John's iMac.sparsebundle' could not be accessed(error-1).
Have tried remounting Time capsule in preferences. Have run Disc utility to verify 'Time Machine Backups'. Sparsebundle is greyed out in Disc Utility.
Time capsule has 1.37Gb free space and is connected via wireless and has a wireless express as a client. Would deleting the last back up be of assistance assuming corruption?
View 1 Replies
View Related
Jun 29, 2009
I'm sure this is a very basic question, but having just made the Mac switch a week ago...I am lost. when I did a forum search, I found out how to access keychains, but I'm not sure if I found something particular to my question- please forgive me if I overlooked something.
I was downloading microsoft software last night and all of a sudden I began getting these little pop-ups that say "A keychain cannot be found for safari" with the option to cancel or reset to default.
how can I fix this so it doesn't happen?
View 7 Replies
View Related
Nov 24, 2010
Time Machine was making a backup to my NAS (a Lacie Network Space 2), when I suddenly got a power failure in my apartment. After that I can't access the share anymore. I can connect to the share but when I click on the share TM was copying to (named "Open Share"), I get the error message: "The operation can�t be completed because the original item for �OpenShare� can�t be found" I can access the other shares and if I use an ftp-application I can access all shares normal.
View 4 Replies
View Related
Jan 19, 2009
Safari keeps giving me popup windows saying a keychain can't be found. It's only just started doing this but it's really annoying. Could it have anything to do with the fact I installed a new flash player? That's the only difference I can think of.Also on another computer it keeps asking for a password to access the keychain. It only does this on one user account though. Any assistance is gladly accepted!
View 4 Replies
View Related
Nov 16, 2009
I made a Winclone image of my Boot Camp partition before upgrading my hard drive, and now I've come to restore the image to a new partition I get the following error: "Invalid Image: MBR Not Found" I get the same error whether I create the partition using Boot Camp Assistant or using Winclone. Anyone had this error before or know the cause?
View 6 Replies
View Related
Jun 11, 2012
Okay, so I am here at work, and have spent the last 4-5 hours trying to resolve this issue, and cannot find any working solutions for it on the internet. We have .3gp recordings. All of a sudden, we started getting this error on some of our computers. Example: I want to play test.3gp; I try to open test.3gp in QuickTime, and I get an error that reads...
"Error -2002: A bad public movie atom was found in the movie:test.3gp" But when I go to play test2.3gp, it plays fine. This issue varies from computer to computer. I get this error on all three of my machines. 2 Windows 7 64bit, and 1 Windows 7 32bit. My colleague and boss can play test.3gp fine through QuickTime on their computers. One is Windows 7 64bit the other is 32bit.
Anyone know some causes of this and hopefully a way to solve it? I tried cleaning up registry errors, running as administrator, updating, reinstalling... Nothing is working.
Info:
Windows7
View 1 Replies
View Related
Mar 23, 2012
i need to program. So, today I need to compile my program. When I printf in Terminal gcc -o main main.c I looked a massage "command gcc not found", I dont`t no what is that, because I dont`t share any system files.
Info:
Mac OS X (10.7.3)
View 3 Replies
View Related
May 8, 2012
Every time I try loging on to youtube I get an error message "404 Not Found" also when I try opening Yahoo it says "Sorry, the page you requested was not found."
View 1 Replies
View Related
Jun 22, 2012
This first time problem has persisted since the most recent Apple updates. I have a 24" Mac w/Lion 10.7.4 Whether I use Safari, Camino, Firefox or Opera eventually I get a "server can't be found" message when attempting to open a site ( including Apple, blogs,newspapers, etc). This error isn't consistent. not always the same site won't open ... sometimes I'll get the 'can't be found message', then after opening other sites and returning to the can't open site ... it opens. Also, mail, especially those from businesses, will open but any pics, drawings, etc. aren't there, just a small box with a question mark. Again, this is erratic problem and doesn’t happen every time I open mail. I visited an Apple Genius and she said it was a network issue, then removed a folder named, "CaptiveNetworkSupport" and 9 files ... including a preference.plist, com.apple.Boot.plist, NetworkInterfaces.plist, etc. The Genius said the problem was fixed ... but returning home, I reconnected everything and the original problem is still exists.
Info:
iMac, Mac OS X (10.7.4)
View 5 Replies
View Related
Apr 17, 2010
1) I had some problems after changing my acct. name, then changing it back again. I thought it was all sorted out, but then started getting an error message when I try to rip CDs in iTunes: You don't have write access for your iTunes Media folder or a folder within it. To change I tried Get Info & have RW permission, so I don't know what to do about that. Other than ripping CDs, iTunes seemed to be working fine however after a week of the above problem, it has developed something new that may be related. I can no longer use Get Info within iTunes to correct or add to entries about the albums like composer, tracks, disk, etc Perhaps that is another RW permission issue.
View 2 Replies
View Related
Aug 14, 2009
I cannot access Entourage all I get is an error (-40) message.
I cannot even rebuild the database.
View 1 Replies
View Related
Apr 3, 2012
Yesterday I installed the latest update of iPhoto 9.2.3 on my MacBook pro running 10.7.3 To my surprise I cannot access iPhoto anymore and get the error log (as hereunder) and the warning that I may have to reinstall the application. I live quite remote and have to drive 1,5 hours to the nearest Apple store and i feel that I should be able to solve this.for now I do not understand how to reinstall if all software was updated.
Process: iPhoto [66878]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:com.apple.iPhoto
Version:9.2.3 (9.2.3)
[code].....
Info:
MacBook Pro, Mac OS X (10.7.3), Iphoto 9.2.3
View 14 Replies
View Related
