Software :: Connection Failed - Access Denied
Jan 10, 2009
We recently installed a mac pro running serverX 10.5.6.(2x3.2 Quad Core Intel Xeon, 16GB 800 MHZ.) I was able to connect to the server from my imac (leopard) and use ARD (V3.2.2) with no problems. Now, since I had shutdown the server for about a week I started it up the other day I am now unable to access it thru our network. On my IMac I try to access using ARD the server lists: "Access Denied". Using GO-Connect to Server I get the message "Connection Failed The server may not exist or it is not operational at this time. Check the server name or IP and your network connection and try again."
I can ping the IP address from my imac. The server is able to access the internet, so I know it's not my network. I have used Disk Utility (on the server) and reset the permissions. After hours on Apple's site and googling I am at a loss. I'm thinking it has something to do with access permissions or something got tweaked at startup (no startup progs in Accts login window) after I turned the unit off for over a week.
View 1 Replies
ADVERTISEMENT
Oct 15, 2010
I am on a ship using a proxy server from our ISP to connect to the internet via a V-SAT satalite dome. We all have individual accounts and the guys using PC's have no problems connecting to the internet. My account also works on a P.C. However whenever i try to connect to the internet I get an Error message 403 "the following URL could not be found" "access denied". However if I disable my proxy settings reconnect to the internet then re-enable my proxy settings I am able to get on line but only for a minute or two then I get the message again. Switching off my proxies then on again always gets me on line but only for a very short period (30 secs to a minute ish).
There has been an occasional time when I have been able to access the internet for longer but only when there has been 3 or 4 people on line and browsing at the same time. I have spoken to my ISP and he thinks I may have been piggy backing onto someone elses account but was unable to offer any other advice and referred my case to someone else and I am still waiting for their response. I am running a mac book pro on snow leopard 10.6.4, using firefox (have the same problem with Safari) with proxy set to "use system settings" and my network preferences set with the given proxy server settings (192.168.10.132, port 3128). I have the same problems using WiFi or cable also.
Other info: my IP address stays the same. Although my cable IP is different from my wifi address. IPv6 is set to automatic. I think the problem lies with my mac as my given user account works on PC computers ( which I am using now!). Also there are 3 other guys with mac books who have also had the same problems although they are now at home. I have also tried changing to a guest account with similar problems although I cannot change proxy settings.
View 2 Replies
View Related
Jun 3, 2014
The Mac app store on my computers indicates that i have one update avalible, but when i try to ener the update section to start it. I get this message. Â Access Denied
You don't have permission to access "/L/673/1119/0s/su.itunes.apple.com.akadns.net/WebObjects/MZSoftwareUpdate.woa/ wa/viewSoftwareUpdates" on this server. Reference #18.3b4e7b5c.1401863922.ba03e3b
Info:
MacBook Pro with Retina display
View 2 Replies
View Related
Dec 7, 2009
Trying to install Dreamweaver MX2004 on the only computer I own that I can still run the program on - 10.4.11 MacBook with plenty of space - and I get this error message.
Of course there is no way, other than spending countless hours of reading thousands of posts and millions of worthless nonsense, to find any help on Adobe (Price per share, $36.37 as of 12.07, "Have I resolved all your issues?").
Any idea as to what's going on? It was on another computer...I may be able to do a Firewire move of the software...if I can relaunch, but I think I removed it from the other computer already. I ran disk utility, as suggested on another forum where I trolled for about an hour.
View 3 Replies
View Related
Jul 1, 2014
I have 2 Imacs, both running OS 10.9.3. The run on a simple office ethernet wired network. We have had no problems until yesterday when suddenly one of the Imacs (Imac A) disappeared from the network. Imac A could see Imac B but not the other way round. Imac A connected to Imac BÂ but was denied access to all the folders under the user directory on Imac B. The folders all have the no entry icon on them and if I try to open them I get the message "can't be opened because you don't have permission to see its contents" . I have checked that the sharing set up on both machines allows access read and write on items and we have been successfully sharing files for months.Â
I have hooked up an old Mac Pro running 10.8.6. to the network. It can see both the Imacs but when I transferred files from that machine to Imac B I got the message "can't be opened because you don't have permission to see its contents". I've checked and the permissions on this folder are set for all to read and write.Â
So far I have checked and repaired privileges using disk first aid.Â
The Imacs are both 3.1ghz Quad core i5 running 10.9.3.
View 1 Replies
View Related
Dec 10, 2014
Where do I get a driver for a Canon CP 800 printer. I installed OS Yosemite recently. The printer gives the code "Access denied 5000"
Info:
Mac mini, OS X Yosemite (10.10.1), mid 2011
View 1 Replies
View Related
Jun 8, 2010
I'm trying to get Prey anti theft working on my macbook. It runs manual and the site says it checks out but a test run didn't seem to work. So I checked console and found: com.apple.launchd[1] (0x10a740.cron[2330]) Could not setup Mach task special port 9: (os/kern) no access Then as I go poking thru console for further clues I notice that I'm denied access to certain logs. Even normal stuff like Itunes crash and such. I'm logged in as admin and I don't recall ever noticing this on my old imac running Panther. This one is running Leopard 10.5.8 and I'm still pretty new to it. Am I missing something here? Why am I denied access? I know it protects certain core systems but console logs?
View 2 Replies
View Related
Sep 14, 2009
I get a -5000 access denied error every time I try to install Canoscan driver software. I tried repairing permissions, rebooted etc. It still happens. I cannot scan.
View 2 Replies
View Related
May 2, 2012
Today I turned on my iMac and an access denied symbol show up at the loading screen. After waiting a while, it changed into a folder with an iterrogation in the middle of it and it starts to twinkle. I really don't know whats going on. Yesterday I turned off the iMac as normally and I didn't add/remove any programs or made a change on my settings.
Info:
iMac
View 2 Replies
View Related
Apr 12, 2012
I recently opened my system files and noticed a file called deferred install. When I tried to open it ,it told me I was denied access to this file even though I am the owner and only user of this computer.
Info:
iMac, Mac OS X (10.7.2)
View 11 Replies
View Related
Jun 9, 2012
I waas locked out of Sirus.ca on safari, the top of the screen says access denied and the site is inactive it waorks on my pc but not on the imac in safari is there a setting in safari I can reset to unlock things?
Info:
iMac (27-inch Mid 2011)
View 1 Replies
View Related
Jul 5, 2012
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?Â
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
View 5 Replies
View Related
Aug 15, 2010
I've recently set up a new home network. I keep getting the following error, which is my computer trying to connect to an IP address from my former network (an external hard drive that was set up as a shared server): Connection failed
The server "192.168.1.66" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. The only button option is "OK." The error pops up repeatedly. The external drive does not appear in my list of shared servers. Since this IP address is no longer valid and never will be again, how can I make this error go away?
View 5 Replies
View Related
Jan 30, 2008
I'm working on a friend's MPB and when ever I try to connect to it from mine (I created the network from my MPB which is almost identical to his), His MPB shows up in finder, but it always says "Connecting..." and then "Connection Failed". Sharing is enabled on his MPB and the firewall is disabled. I have been through everything that I can think of to try and fix this, short of re-installing Leopard. His MBP came with Leopard pre-installed, so there is no need to worry about the upgrade messing things up. I have checked from a MacBook and that one cannot connect either, but both connect to mine with no problems.
View 4 Replies
View Related
May 2, 2012
When trying to send a message from Apple Mail using my AOL account, I get a meessage that says "server has failed".Â
I have deleted the account, deleted all server choices, restarted the iMac, and still keep getting the issue.Â
Info:
iMac, Mac OS X (10.7.1)
View 2 Replies
View Related
Dec 6, 2006
http://att.macrumors.com/attachment....1&d=1165464754
I already have the drivers downloaded from HP and the printer connected via USB cable.
View 11 Replies
View Related
Nov 24, 2007
Lately, my MacBook's been popping-up window after boot that says, "Connection failed. The server may not exist or it is not operational at this time." I don't know what server my Mac is trying to connect to. How/where can I look to see what's trying to connect, and to shut it off from trying at boot?
View 8 Replies
View Related
Nov 12, 2008
Since I installed Leopard on my Macbook, AirPort (network) disconnect every 5-10 mins then I have to turn the airport off and turn it on again to got it reconnected. I went several time to different apple stores but I have nothing resolved from them. they created a new user account, reinstalled Leopard etc,. I used many networks at home, school and public and the problem is still occurred. I am using a linksys router.
View 4 Replies
View Related
Jan 1, 2010
I have been using both messenger 7.0.2 and the beta version of 8 for some time. I have recently upgraded both to Snow Leopard, and changed my ISP to TPG (Australian ISP). Ever since, when I attempt to connect to messenger (either version) it says the connection failed as I am not connected to the internet. My internet works fine so I am at a loss as to what the problem is.
View 3 Replies
View Related
Mar 23, 2012
Just installed Lion on my iMac and FaceTime isn't working. It says 'Failed Connection' when I dial one of my contacts, but wifi is on an everything else is working.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 28, 2012
I've been having a connection issue for a while where some days I can connect to our networked drive just fine and some days it fails and gives me the connection failed window.The shared drive is hard connected to an imac and I connect to it via the shared items or apple + k with the ip address. When the connection fails they both stop working.
Info:iMac (20-inch Early 2008), Mac OS X (10.6.8)
View 4 Replies
View Related
May 15, 2012
I have a desktop Mac that I used Migration Assistant to transfer my user setting etc. prior to selling my MacBook. All works well, except that everytime I try to print a document it pauses while looking for a shared network volume for a while before coming back saying "Connection Failed to MacBook". I deleted all printers and resent printers from preferences to add them back manually and repaired permissions however the problem is still happening everytime I try to print a document. Its as though its looking for the old MacBook.
Info:iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
May 18, 2008
My family owns 2 MacBooks plus XP desk top and Vista laptop. Wireless setup is provided with an older linksys a/b/g router and Comcast Cable Modem. The 2 MacBooks have frequent problems printing to the Brother 5250 DN printer, with connect fails. I have to reset the IP addresss frequently to get the printers to work with the wireless side of the network. The Windows OS PC's don't experience this problem. I am at a loss as to why the Macs have this IP problems.
View 11 Replies
View Related
Jan 22, 2009
My company uses a network drive attached to our router. I can connect to the drive fine, but only after a fresh reboot. If I turn on off the MBP or hibernate it, when it boots back up it tells me it can't find the network drive. Trying to reconnect to the network or turning airport on and off doesn't work. I have a mac mini that i never shut off that never loses connection, only the laptops.
View 1 Replies
View Related
Jun 21, 2009
In the last week I have been getting a persistent warning on my desktop: "Connection Failed. This file server is running on your machine. Please access the volumes and files locally." Sometimes there will be 5 or 6 of these warnings to be cleared from the desktop. All my drives are mounted correctly (2 internal 1 external USB drive) and there are no other file servers set up on my network. My machine is 400MHz PowerPC G4 700 MB SDRam running 10.4.11.
View 1 Replies
View Related
Sep 1, 2009
For some unknown reason i cant seem to connect to wirelessly to my adsl2 modem. I have tried 2 different modems same result - i can see them but when i connect it immediately says "conection failed" - i can connect successfully via ethernet but not wirelessly. I have a 2009 macbook pro running 10.6 snow leopard.
View 3 Replies
View Related
Aug 9, 2009
I have five Macs in the house, all of which can see each other on the local wireless network...but...for some weird reason, none but when they try to connect, I get �Connection Failed� after several minutes of silence.
When I click �Connect As...� in hopes of getting a login screen, nothing happens at all. Nada. Zilch. Zip.
The sharing settings on the MacBook are identical to the ones on the other five. Of course, the MacBook can connect the other direction to everyone, including my brand spankin� new MBP.
Any clues, oh wise ones? I�m stumped. What is it about getting into a simple MacBook that has two G4s and two MBPs scratching their heads?
View 2 Replies
View Related
Sep 12, 2009
I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
View 2 Replies
View Related
May 12, 2010
I've done this many times in the past.
The phone and the mac connected ok via bluetooth, and I inputted the code that comes up on the screen. After which the the connection 'failed'.
I then tried another mobile phone, and the connection failed on that too. The thing is I've used both phones before to transfer files to the Mac Pro.
View 1 Replies
View Related
