MacBook Pro :: Sudden Canon CMFP Printer Driver Error?
May 30, 2012
My Canon MF8380 had been working fine with my MacBook Pro (printing wirelessly), and all of a sudden today I am getting an error that says: "Canon CMFP Printer Driver: Printer is not responding. Check the printer power and connection, and then try sending printing job again."
I have tried the basics - turning off and on the printer, rebooting the MacBook Pro, printing from different applications, making sure Job Accounting is not checked in setup, seeing that the driver seems like it's acknowledged, checking and unchecking sharing prefs.
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
I bought a Canon LBP3000 laser printer and I was told it would work on my iMac but it seems that this printer only works with a Japanese OS X and not on an English system. Does anybody have a driver for an English OS X?
I have installed the Canon MP380 printer driver for my new imac but I cannot find it listed under the Canon model name in Printer Setup. All I see are "gimp beta" this or that. When I try to print the text is too small. It's not filling up the standard size piece of paper I am printing on. What am I doing wrong here??? This is very confusing.
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
I have a canon mx700 printer.I just upgraded to snow leopard 10.6.8 and now my printer is no longer working.This is probably the 50th time I have had this problem. It always occurs whenever I update my apple software. I have tried reseting my settings, updating my drives and trying to connect the printer directly into my computer and over my network without any success. Upon resetting my drives I keep getting this error a communication error has occurred.
All of a sudden I cannot print to my Canon MF4370dn. I am connected via the wifi network. I didnt have a problem with any of this until a week ago. I called Comcast and they told me that they connections were good. I know this is true since my ADT service is working just fine and it is connected to this network.
I called Canon and they are not supportive at all. They tried to uninstall and reinstall printer but it still did not work.
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
Canon advertises this printer as having ONLY Windows drivers, however there is a solution if you are interested in buying the printer (I bought one for around AUD150, delivered in Melbourne). As reported in Macosxhints here there is an OSX driver for the Canon LBP3000. Go to the linked Canon page (which is in Japanese) then scroll to near the bottom of the page for links to the driver (MXCAPT160). Download that and install it. Edit: The printer dialogue (when you attach it) is then in English. It doesn't offer all the options available in Windows (mainly output quality & economy modes) but is fine for straightforward printing to A4, letter, legal, A5, A6 and a couple of Japanese envelope sizes (Yougata-4 approximates DL).
I purchased that today, although the clerk knew that I use a mac he gave me no warning. in an older threat I read that it works with a file named cncupslbp2900captk.ppd.
I got a used printer Canon BJC-85 and realise with my very limited knowledge that it does not have the correct/updated version of driver for my iBook G4. It only mentions PowerMac G3 in the installation instructions. A friend told me that you can download the appropriate version for my laptop from the internet, but I don't know how to do this. Could you give me any advice about how to do this?
I recently obtained a 2013 Macbook air 13" and upgraded the os to Yosemite. I plugged in my travel printer, Canon BJC-85 and there is no driver compatible. The mac recognized it as plugged in but under the list of available installed drivers there is nothing that will work with it.
I tried to do a software update but it says my system is already up to date. I went to the canon website and it said mac OS X already has the drivers.
I used this printer on another mac OS X laptop and it had the drivers already like it should.
Info: MacBook Air (13-inch Mid 2013), OS X Yosemite (10.10.1)
I have Canon CanoScan LIDE 50 and I do not know how to get it work. I have downloaded and installed the latest driver from Canon official webpage, and I also have downloaded and installed CanoScan Toolbox 5.0, but still it wont work.
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640hthe
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page.
I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Info: iMac (21.5-inch, Late 2013), OS X Yosemite (10.10.1)
Printer software for canon MP830 is unavailable from Apple. I downloaded the driver from canon and installed it. It shows on the desktop, but I cannot add the printer. It keeps wanting to find the software at apple.How do I configure this to work?
Info: MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Canon MP830 printer
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
I've had my MBP since Oct of 2007. About 2 weeks ago it would not turn on so I had the logic board replaced. After I got it back it would randomly shut down, the only solution I could do is take out the battery and work at the lower clockspeed but it still shut down without warning, just less frequently. I thought it might be the power cord or the battery so I got those replaced but it is still happening. The first day I had the battery (yesterday) it worked fine, no random shutdowns, I calibrated the battery per apple instructions and today it worked great (during charge up and plugged in at full charge) for about 5 hours, then it shut down, I turned it back on and it shut down shortly after, I reset the SMC by taking out the battery and holding down the power button and putting it back in and it shut down again.
Then I tried to run the hardware test and it shut down again so now I am posting this out of frustration. I also reset the pram and it shut down again. Now it won't stay on for more than getting through the login screen. I don't have applecare but they replaced the logic board for no cost (which I don't fully understand), I'd rather not take it back but I will if you guys have no ideas. I looked up (with difficulty) the previous shutdown code: -2 (http://www.macwizard.com/errors.html) and it said it was a "General System Error (VBL Mgr, Queue) -2 vTypErr invalid queue element" but I have no idea what that means.
i am having trouble installing a Canon LBP5300 printer on my macbook pro running OSX 10.6.8. I tried to use the Add pronter option formPreferences. I have downloaded the software from Canon and it seems to install but the printer is not added. There is no software available from Apple using the software update option.Can anyone suggest what I need to do?
I just installed canon drivers which come in a bundle of unnecessary drivers and take up a lot of memory spaces
also every time i log into my mac it will have a pop up window as below:Do you want the application “ccpd” to accept incoming network connections?which bothering me alot and i decided to delete it and use back my old printer but i unable to undo it.I have been trying to reset my printer ( preferences -> printer and scan ) and also searching for the locale of driver in " library " but still in vain. how to delete the hidden drivers?
I have a Canon MP560 wireless printer. For several years the printer has been on my wireless network and has been used successfully by several Windows laptops. I recently purchased a used Macbook Pro and I would like to be able to print wirelessly to this printer. The Macbook pro is successfully connected to the same wireless network that the printer is on. I have read through many, many articles and forum posts on how to get this working but I am unable to. When I go in to the system preferences>printers to add the wireless printer it never shows it as an available device. I have done the following:
1. updated to the latest OS X 10.9.5
2. installed the latest driver for the printer from canon's website
3. Downloaded the latest canon inkjet printer software update from the app store
4. reset the printing system several times
5. I have plugged the printer directly in to the Macbook via USB cable
When I have the printer plugged in via USB it is shown in the list of printers and works fine. But when I disconnect the USB cable it shows the printer as offline and I see no way to have the printer available as a wireless printer. If I click the + button to add a printer there are no printers to select to be added.
I have gone through the steps in several forum postings including this one: MacBook Air won't find HP wireless printer and similar other ones but so far nothing has solved this issue.
I have a Macbook air and my printer is a canon 6150.
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
