By mean of bootcamp, I install vista ultimate on my imac. Everything was working ok. I can bring up either programs by holding down my option key and then choose either pc or mac ox. But now a problem has come up. I can now only boot up the pc program and it does not matter if you use the option key or not. PC program is all I get. What can I do to get back on my mac ox program?
View 1 RepliesI just purchased a new IMac 20 for my home office and I had it set up from MacMall with a number of pieces of software including Parallels and Windows XP Home. I really want this Mac to work (I love my MacBook Pro), but I can't seem to load a piece of Windows software that I HAVE to be able to use. After I put the disc in I keep getting the same error message "The application failed to initialize properly (0x000135). Click OK to terminate." I have tried this same disc in a few pc's and it works fine.....so it has to be my new Mac. BTW the software is something I use that is specific to the funeral industry and the vendor does not support MAC, so I have to work this out on my own.
View 6 Replies View RelatedI have a 15-inch MacBook Pro, the new unibody ones, and I installed Windows XP, using BootCamp.
I made it a 29 or so GB partition, so it used the FAT32 formatting.
The program I tried to install is the eyeQ speed reading program, and the laptop exceeds every single one of the recommended requirements.
The problem comes when I am attempting to install the program, I keep getting an error message in which it says "This program cannot run on a computer with less than 64 megabytes of ram."
Last time I checked my laptop has 4 GB of ram, and it says the same thing when I checked it while running Windows XP.
My only guess, which I made while typing this, was that I should have formatted the Windows partition using NTSF.
The new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies View RelatedSpeakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
Info:
iMac, Mac OS X (10.6.2)
I downloaded animation shop and got everything successfully but when i double clicked on the zip it just turned into a cpgz file. what is that? How do i get my program to work? I haven't really used a mac before and have no idea what files work on them...
View 2 Replies View RelatedI just recently got a MacBook - I'm new to the Mac world, but so far I love it and its worlds better then Windows 7 or anything else I've used. I'm picking up everything ok, except for a few little things. My biggest problem is in the "Numbers" spreadsheet program. I've searched the help topics and cant figure out how to make the numbers in my budget add up.
For example:
Paycheck- $500
Rent-$100
Food-$50
Car-$25
Total Expenses- $175
Difference between income and expenses: I cant get it to fill in the gap between the income and expenses so I know how much I have left over without having to do all the math myslef. Excel used to do this, is there a way to make Numbers do it too?
Will my Mac Mail program work with iCloud? Will I still be able to receive messages in Mac Mail program sent to my non-Apple addresses?
Info:
iMac, Mac OS X (10.6.8)
I want to have access to certain cooking videos without needing to access the internet. Is there a good OSX program that can do this?
View 5 Replies View Relatedhow do i program my internal speakers to work instead of the headphones?
View 2 Replies View RelatedSo, I've been using Windows all my life. Some not by choice.
My notebook died and I'm in search for a new one and I'm considering the macbook.
The only question I have is, will it run every Windows program without any issues? I'm going to be using this for work. Besides your typical Office suite, I run AutoCAD, Adobe CS, Audio and Video editing and burning. And all the licenses are for Windows.
I just want to make sure I won't have any software issues before taking the leap.
I guess what I'm asking is, is Windows under an Apple hardware work exactly as Windows would?
I have been having problems with uploads from my computer: is there a program that will help me monitor traffic and also pinpoint where all my traffic is going?
View 1 Replies View RelatedValve Software this week quietly began accepting applications for a forthcoming beta program aimed at testing its highly-anticipated Steam for Mac online gaming service, several AppleInsider readers have discovered."We are going to conduct a closed beta for testing of the Mac client and Mac versions of Valve games," the company wrote on its website. "Participants will be selected to provide broad coverage of testing criteria. Please be honest in your answers as we need to test all types of users, systems, and software configurations."
View 22 Replies View RelatedDownload problem with abbyy finereader express.I downloaded 5 times and the problem continues.Incomplete download and the program don't works.
Info:
Mac OS X (10.7.3)
I just started a new class and it involves the use of a program that needs Windows to run. I have no idea how I will be able to use it with a Mac. I asked my professor and he suggested installing Vmware. I did this and I don't know what to do because the disc still won't run. Does anyone know how I can get Windows on my Mac so I can run this program? I am not that savvy when it comes to computers.
View 1 Replies View RelatedI ran the bootcamp utility on my Macbookpro with no problems. Selected the first option for partition of 32Gb, ran the XP Pro SP2 disc and it never gave me the option to format... Obviously got a "disc error, press any key to continue" message since the drive is not "bootable." So I found a thread online that sent me to the XP site to discuss FAT32 issues. The drive can't be larger than 32Gb (which it shows 32,600 after the partition), so I deleted the part. and rebuilt it at 30Gb. Still didn't give me the option to format the drive! It shows the partitions, so I select the C:yatta-yatta-/bootcampwhatever , press enter and it starts installing... Any idea on how to force the XP setup program to allow me to format the silly partition?
View 4 Replies View RelatedI know I can use AOL IM, but I was wondering if when I bootcamp over to my Windows 7 partition if there was a good chat program out there that has the balloon pop-ups similar to iChat.
View 4 Replies View RelatedSo honestly I'm pretty much gonna use the windows partition for gaming and for using programs that are exclusive to windows. Would it be worth paying for antivirus software or just install a free version? What software do you use? Is it free and effective?
View 24 Replies View RelatedI'm trying to run a program that is specific to Windows. Can I run it on my iMac or Macbook Air?
Info:
iMac, Mac OS X (10.7.2)
I saw it somewhere but i dont know where and i dont know what its called.
you can resize every window using a grid which can be accessed from the top right of the screen, when you can line windows up etc.
Been on Windows 7 for a while now, and when I first installed Windows 7 (upgrade from Vista) I've been getting an error saying I have no default mail program. I use Windows Mail with my hotmail account, but it still gives me an error. I did not do a clean install of Win7, I upgraded it (to where it saved all of my previous data)
View 9 Replies View RelatedI found out a way to get Fruity Loops 9 XXL on my Macbook using Wine/Winebottler. I can not for the life of me figure out how to delete a note on the kick drum track for example. I used to use FL on my old PC and I'm finding a hard time transferring the PC shortcuts to Mac.
View 1 Replies View RelatedI have been running vista64 through bootcamp and fusion so that I can run autocad on my late 08 MBP. The only issue I've had is that everytime I boot into vista I have to reactivate my autocad. It doesn't seem to matter whether I go in through bootcamp or fusion.
View 4 Replies View RelatedI have installed windows xp pro through fusion 2 in my 15' macbook pro, the memory it gets shared is 512mb and the hard drive gets 40GB. Is it enough to run accounting and office softwares with total satisfaction? Secondly, can I run windows compatible program through the use of fusion 2 without running windows os everytime? Does that way save power to extend power life? Additionally, I just found that the white background color of the accounting program really hurts my eyes. Is there certain ways to make white background color look moderate to the eyes?
View 8 Replies View RelatedThere is lots of coverage regarding how to install software on crossover 8.0, but there is nothing that I can find regarding programs that require you simply to run them, without installation. I try and click them, and for less than a second, an image bounces above the crossover icon, but then it stops.
View 4 Replies View RelatedIs there a program for the Mac (G3 Tiger) that will perform a hardware performance test like PassMark's for Windows?
View 2 Replies View RelatedSo I just recently converted to all Mac. With that being said, I purchased a couple seasons of Mad Men via iTunes.
Now with music, I know you can burn the album to a cd and then import from cd to have a non-drm album. Not knowing, I've come to realize that you can't do this with videos.
I've read that you can backup your iTunes library on DVD, but I really don't want to do this all the time. I have my iTunes library on my ext hdd with a TM partition, but I don't want to rely on it (also my media is going to eventually outgrow that TM partition).
So, with that being said, I'm looking for a program that will re-record (or as others put it DRM stripping) the original untouched purchased video and give me a DRM free copy for backup.
Or, if there are any programs out there or methods of completely backing up iTune's purchased video, then I'm open ears.
I'm currently running Win7 x64 on my Bootcamp partition. I'm wondering if there is any program/software that will allow me to utilize gestures, just like on the Mac OS side, for my Win7 partition? Basically, is there a BetterTouchTool program for Win7 on Bootcamp?
View 4 Replies View RelatedHow do I open the same program in two separate windows?
Info:
iMac, Mac OS X (10.7.1)
At Start up on OS Lion 10.7 it opens a lot of program windows How can I stop this happening?
Info:
MacBook Pro
