OS X :: Program For Mac To Performance Test Like PassMark's For Windows?
Dec 29, 2009Is there a program for the Mac (G3 Tiger) that will perform a hardware performance test like PassMark's for Windows?
View 2 RepliesIs there a program for the Mac (G3 Tiger) that will perform a hardware performance test like PassMark's for Windows?
View 2 RepliesWhat hard drive performance test software is best for the Mac Pro and Snow Leopard? I need to test in normal config with SSD and HDD and in RAID configs.
Any additions on overall system performance test software for CPU, GPU, etc...
Recently I bought WD6400AAKS hard drive. I made to partitions (1st for OS and applications, 2nd one for photo files). I also did fresh OS install and loaded basic applications. Strangely I didn't notice any speed boost while booting and to be honest I feel like all applications (photoshop for example) are also starting much slower than on original hdd. Is there any way to test hard drive if it performs as it should be? I also have 2 more older drives installed. is it possible that one of them would slow the system down?
View 5 Replies View RelatedCan Anyone tell me how I can delete my Test Movies in my Imove system? I can't find any way of deleting any Videos that I don't want! Also how do I make a video ready to put onto My youtube account?
View 1 Replies View RelatedI have a 15-inch MacBook Pro, the new unibody ones, and I installed Windows XP, using BootCamp.
I made it a 29 or so GB partition, so it used the FAT32 formatting.
The program I tried to install is the eyeQ speed reading program, and the laptop exceeds every single one of the recommended requirements.
The problem comes when I am attempting to install the program, I keep getting an error message in which it says "This program cannot run on a computer with less than 64 megabytes of ram."
Last time I checked my laptop has 4 GB of ram, and it says the same thing when I checked it while running Windows XP.
My only guess, which I made while typing this, was that I should have formatted the Windows partition using NTSF.
My son's 17" imac PPC G5 was not booting up. After a trying a couple of things I got it to boot using Disk Warrior and reparing the file directory. At that time I also ran DW's hardware test which said the drive was fine. My son hard restarted it shortly after I fixed it and it wouldn't start up again. Just a gray screen, no apple logo. When I tried to use DW again it told me there were problems with the hard drive and it couldn't fix the problem. I tried to fix the hard drive in target disk mode using Disk Utiltiy and Drive Genius. No luck. So I pulled a working drive out of my Mac Pro and reformatted it and swapped the internal drive of the iMac with it. There were no DIP switches to set. Started up the imac with a Leopard retail disk thinking I would just install a fresh system onto the replaced internal drive of the iMac. Disk Utility on the leopard disk didn't see the hard drive. Now I'm beginning to think it's a logic board problem but I can't find the original disks to do a Hardware test with. Is there some other way to test a logic board? Or some other idea that I'm not thinking of that could be wrong with the machine?
Info:
Mac Pro, Mac OS X (10.7.4), ATI 1900, 8GbRAM
if you recall a thread I started trying to get help on why the Mac Pro was crashing... I finally narrowed it down.After speaking to about 4 different people at apple.... they had me run the Apple Hardware Test off the boot CD.I took out EVERYTHING except the 2nd DVD burner (Apple Branded Superdrive from my old 2.5 Dual G5)... and ran the test.The Hardware Test ACTUALLY FROZE IN THE MIDDLE OF THE RAM TEST.I thought I had bad aftermarket ram... as it wasn't playing nice with the Apple ram when I added them together.Looks like I had fine aftermarket ram... the Apple ram was bad.I REPLACED the Apple Ram with the Aftermarket Ram... and the Hardware Test completed fine.So, now I'm going to be calling them again in the morning and letting them know what happened. I wonder if they'll just let me RMA the bad ram, or if I'm going to have to lug this dang thing down to an apple store.I WONT BE HAPPY IF I HAVE TO DO THAT.Oh, and no more lockups since switching out the ram... and all the other quirks (not able to burn CDs in Windows, sloooow Internet page draws, etc...) are all but gone now.
View 8 Replies View RelatedI am a high school senior. Next year I will be going to college and majoring in Computer Science. I am going to purchase a laptop for school, and I'm sure that you can all relate to the fact that there is simply no way that I am going to drop a grand or two on a Dell or Sony; a Macbook or a Macbook Pro is definitely in my future (actually, I've wanted an Apple computer for about five years now).
However, due to the nature of university computer science work, it is inevitable that I will need to run both Windows and Linux to complete research, assignments, and projects. Because I will need to use these two operating systems on a daily basis along with OS X for personal use, I have decided that virtualization, not Boot Camp, is the right option for me. I think I will use VMWare Fusion, but let me know if you think Parallels is much better.
I am trying to decide whether I need/want a Macbook or a Macbook Pro. I have weighed many factors, such as price, portability, expandability, etc., but my question is this: for day-to-day virtualization of Windows and Linux, is a Macbook Pro necessary for acceptable performance, or would a Macbook do almost as well? If Windows XP or Vista or 7 on Parallels or VMWare on a Macbook will drive me nuts with lag, a jittery cursor, etc., then a Macbook Pro would be a justified purchase.
One of the main differentiations between the Macbook and the Macbook Pro is the graphics chipset; it is important to note for this discussion that I have little interest and requirement for working with video games or 3D graphics. I might have to run a few small OpenGL programs here and there for programming exercises, but this will be rare.
I just installed a copy of window 7 x64 ultimate on my uMBP 15", 2.66, 4GB ram, 9600 GT.
everything went well using the bootcamp that comes with my snow leopard dvd and also using the bootcamp driver on that dvd too.
anyway i have a few question regarding this.
-after i installed the windows, now everytime i perform disk utillity, verify disk permissions, it takes considerable longer time compared to when the machine is Mac OS only.
previously , after i hit the "verify disk permissions button" it will says straight away like estimated time 28 minutes, then drop to 8 minutes and then to 1 and finaally done.
now after i install window 7 on my mac using boot camp. when i hit the "verify disk permissions" it it says estimated time 1hour 40 minutes !!!
of course it will finissh eventually in less than that , but still it considerably took longer compared to prior window 7 installattion, does anyone experience this as well ?
-the performance benchmark on win 7 ultimate x64 on my mbp is 5.6 score.
is this normal ?
Now that Apple has unleashed BootCamp, has anyone run 3D Studio Max on an Intel Mac with Windows? How's its performance?
View 24 Replies View RelatedI'm trying to get the best performance out of my vmware, so, what are the best settings i can put (remember I want the closest to bootcamp quality) on my Unibody Macbook pro 2.5 4 gigas RAM.
View 5 Replies View RelatedDoes anyone have any comparisons of disk performance under OS X and Windows? The reason I ask: I've come to notice that the sound of disks being accessed is very different under the two OS varieties*. So much so, I can recognize the OS in use merely by the sound of the disk! So, I'm led to wonder: which OS on a Mac Pro has better disk read/write speeds?
* - Really rather rough and silly descriptions follow
Windows - snow being crunched underfoot
OS X - a spun coin settling on a table
I have a Mac Pro 2009 2.66 quad with ATi3870 and 6 gigs of ram. I used to run a boot camp Win7 RC partition with first Fusion 2 and then 3. It worked fine. Now I bought Win7 Ultimate and I'm getting ****** graphics performance in Fusion. The screen updates slowly. When I move a window there's noticable tearing. Fade effects don't really show fade but a few fading frames of the animation.
View 1 Replies View Related
I just bought a brand new i5 quad core iMac. I installed Starcraft, and I have to crank the settings down in order to get a decent frame rate, so I thought I'd give Bootcamp a go.
I installed Win7 64bit and then installed the drivers from the DVD which came with it. I started up the Starcraft 2 installer and 8 HOURS LATER, it was still at only 60%.
Steam also seems to have issues, it will halt with a "This program is no longer responding" window, and then randomly spring back to life a few seconds later.
The system also feels really sluggish. I've not been able to benchmark anything on it to see if the system is really slow, or if it's just my perception as all the modern games I have are in my steam account.
For some reason when I shutdown, Windows also seems to hang on "Shutting down". It does not exhibit the same behaviour when I launch the boot camp partition through VMWare.
I have a 17" unibody MBP (early 2009, specs below). It was running hotter than usual the other day, so I F2 booted into AHT to run a diagnostic. The status box within AHT showed 1 second into the 1st pass, and never got beyond that. Several seconds after that status message was displayed, the cursor froze. The time counter never advanced after that, and although I waited a long time, nothing happened. The test froze.
I've tried it several times more. It once worked, but every other time has frozen. Checking the "extended test" box, or trying to run in loop mode has made no difference - still freezes at "1 second".
I've had this machine for 3 years, OS's Leopard through Lion, and this has never happened before. I last ran a test, successfully, in January. I've not changed any components or suffered any damage since then. Memtest (ver 4.22) says my RAM is fine. (I ran this because the first portion of the AHT is the RAM component.) Aside from the aforementioned overheating episode, which disappeared, my machine's been fine.
early 2009 MBP unibody 17"
2.93 Core 2 Duo
8 GB RAM
750 GB HD
Info:
MacBook Pro, Mac OS X (10.7.3)
Does parallels hurt the running of a Mac?
View 1 Replies View RelatedI installed Vista Home Premium on a bootcamp partition. When I load it up in vmware, the graphics really take a fall. Is this normal? I have to use the vista basic theme since it won't let me run aero!
View 4 Replies View RelatedI'm running W7 ultimate on a Rev. A MBA. I'm looking for some tips on improving performance in Bootcamp.
Here is what I have done so far:
- Installed latest BC drivers (3.1)
- Defragged windows partition
- Disabled hibernate function (to save HDD space)
- Installed all updates from Windows Update
- Disabled (some) of the Aero eye candy
- Disabled unnecessary services (ala Blackviper's site)
- Disabled unnecessary startup programs
EDIT:
- Disabled Index Service
- Disabled Windows Search
My main reason for wanting to do this is that I'm having some issues when playing MP3s in WMP. They play fine until I say, launch Firefox. Doing so causes the playing MP3 to skip, or temporarily become garbled. I assume this is due to taxing the HDD, but since upgrading to an SSD is currently not an option, I'm trying to squeeze as much performance out of the system as I can.
iMac, late 2006 Generation
XP info:
System:
Microsoft Windows XP Professional Version 2002 Service pack 3
Computer:
Intel(R) Core(TM)2 CPU
T7400 @ 2.16GHz
2.16GHz, 2.98 GB of RAM
Physical Address Extension
Leopard info:
Version 10.5.8, same hardware.
I've installed XP via Boot Camp. The internal drive in the mac is 230gb (total), and I allocated 60gb to XP. I formatted the partition to NTFS (not quick), and completed the rest of the setup. I then inserted the Leopard DVD and installed the boot camp drivers. Then I downloaded all available updates for XP, and the only other thing I've installed is Mozilla Firefox. I've also made changes to the system using an optimization guide (link below), and the performance seems to be the same before and after.
[URL] - I've only done as far as number 20.
The performance is very sluggish. It shows most while scrolling. It's not smooth and jitters a lot. On previous installations of XP on this computer, I've run audio software (Pro Tools/Cubase) and the performance is terrible. It can't handle even the simplest of tasks.
On the Mac OSX side of the machine, however, performance is fine. Everything runs smoothly.
As far as I know, the specs of the computer are pretty good. I can't understand why performance wouldn't be up to scratch
So, I'm just wondering if anybody has any ideas on what's going on? Is this normal, or am I missing something? It seems like Windows isn't using the full power of the hardware.
I have a 15" 2010 MBP. I got it well spec'd, with 7200 drive, 8 GB ram, best CPU... First thing I did was bootcamp. Went smoothly - did a 400 gb partition for Windows 7. The drivers all installed fine and Windows 7 does alright.
My Windows Experience scores:
Processor: 6.9
RAM: 6.9
Graphic: 6.4
Gaming graphics: 6.4
Hard drive: 5.9
Things look good... But I am having trouble playing hidef content - VLC is choppy on a bunch of files that play smooth as silk when booted into Mac OS - and actually even play ok on my old Santa Rosa 15" MBP. Quicktime is also slow. I have always found VLC to be very solid. (actually use it on the Mac side for this test as well). I tried playing with the hardware acceleration toggle, and it does seem better with it disabled - anyone else having issues playing hidef media on the windows side of this MBP?
Considering buying win 7 so i can bootcamp for 1st time. Before I do though, I want to know if/why it'll work. I've read that OSX 10.6 has driver issues witn nVidia hardware. Well, why would they be any different on Windows? Does Microsoft write its own drivers for Mac hardware? Or is it nVidia? I ask this b/c dont you have to install the drivers off the OSX disc? Doesn't make sense why apple would give you better drivers for windows than they do for OSX. Point is, I'd be doing this for gaming. I just don't see why there'd be any performance improvement with the SAME HARDWARE, just running windows instead.
View 15 Replies View Related1) Can you boot into XP and/or Vista (using bootcamp) from the SATA ports on the system board?
2) What are the transfer rates (input and output) on these ports?
3) Does using these ports in conjuction with a Mac Pro RAID Card affect the transfer rates/latency of the drives connected to the RAID Card?
ill installing windows in my mac via bootcamp in anyway affect my mac's performance? ( Is it possible that it will run slower)
View 4 Replies View RelatedI am tempted to purchase 2nd hand 13.3" MacBook Pro 2.26GHz, 2gb ram, 160gb hdd.
I have a need to run windows as a virtual machine for some occasional .NET development (which I am studying)
I have a couple of questions
What is the impact of battery life running a VM? I intended to run it in Unity mode and only have open .net tools such as visual web developer.
Also, does anybody know the performance of windows 7 in the new Fusion version? (What's aero like?)
Would the performance of an XP vm be better?
I have bought Macbook pro 13 , 2.4 GHz 2010 model with nVidia 320m graphics, Now my question is that I have installed win 7 on bootcamp and windows experience index scores 5.2 (win aero ) and 6.0 (gaming) , these both scores are same as friends 9400m macbook white, so is it ok ??? or future driver updates may increase these score??
View 3 Replies View RelatedSo, I've been using Windows all my life. Some not by choice.
My notebook died and I'm in search for a new one and I'm considering the macbook.
The only question I have is, will it run every Windows program without any issues? I'm going to be using this for work. Besides your typical Office suite, I run AutoCAD, Adobe CS, Audio and Video editing and burning. And all the licenses are for Windows.
I just want to make sure I won't have any software issues before taking the leap.
I guess what I'm asking is, is Windows under an Apple hardware work exactly as Windows would?
I just started a new class and it involves the use of a program that needs Windows to run. I have no idea how I will be able to use it with a Mac. I asked my professor and he suggested installing Vmware. I did this and I don't know what to do because the disc still won't run. Does anyone know how I can get Windows on my Mac so I can run this program? I am not that savvy when it comes to computers.
View 1 Replies View RelatedI ran the bootcamp utility on my Macbookpro with no problems. Selected the first option for partition of 32Gb, ran the XP Pro SP2 disc and it never gave me the option to format... Obviously got a "disc error, press any key to continue" message since the drive is not "bootable." So I found a thread online that sent me to the XP site to discuss FAT32 issues. The drive can't be larger than 32Gb (which it shows 32,600 after the partition), so I deleted the part. and rebuilt it at 30Gb. Still didn't give me the option to format the drive! It shows the partitions, so I select the C:yatta-yatta-/bootcampwhatever , press enter and it starts installing... Any idea on how to force the XP setup program to allow me to format the silly partition?
View 4 Replies View RelatedI know I can use AOL IM, but I was wondering if when I bootcamp over to my Windows 7 partition if there was a good chat program out there that has the balloon pop-ups similar to iChat.
View 4 Replies View RelatedBy mean of bootcamp, I install vista ultimate on my imac. Everything was working ok. I can bring up either programs by holding down my option key and then choose either pc or mac ox. But now a problem has come up. I can now only boot up the pc program and it does not matter if you use the option key or not. PC program is all I get. What can I do to get back on my mac ox program?
View 1 Replies View Related