MacBook :: Tiger OS : Boot Up Using 2.5 HDD?
Feb 5, 2009Any one know how to do the boot up mention above?
View 4 RepliesAny one know how to do the boot up mention above?
View 4 RepliesI was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
Information:
MacBook Pro
Mac OS X (10.4.10)
Grey Screen, Spinning Gear
I have a iBook G3 laptop that has a new hard drive that has been formatted. I can't boot my Tiger DVD off the iBook when pressing the letter C. I receive a blinking folder icon. When I hook a firewire cable from the iBook to my Mac Pro running Leopard I can boot off the DVD. After I click on English as my language I receive a dialogue box stating I can't install Tiger on my Mac Pro. When I go to Disk Utility it does see the formatted new hard drive. I want to get Tiger on the new hard drive.
View 2 Replies View RelatedI have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
View 24 Replies View RelatedA few months ago, while running Tiger on my Mac Pro, I installed a new additional hard drive and then installed Leopard on that new volume, calling it "Leopard".
The boot volume choice seemed to be a bit flaky the few times have rebooted while installing, but I went with the flow and didn't pay any attention to it.
Today, I installed a bunch of new software in this sequence:
On Leopard: I installed Windows Office for OS X and two immediate subsequent software updates for that, bringing me up to 12.1.4
I did Software Update for OS X, bringing me up to 10.5.5
I then had to restart. When my system rebooted, Tiger came up. (I wasn't quite paying attention). Then, I got a prompt for Software Update again, so I did that (for Tiger). I clued in that I was running Tiger (missing the obvious fact that my screen background was not Leopard.... duh), when I saw the Java 10.4, Version 7 update. Then, my Tiger BackUp kicked in, so that took a DVD write, and an Adobe Reader update. Phew.
So, then I go into Tiger System Preferences and set the boot volume to Leopard, and restart. Tiger comes up again. I go back into Tiger System Prefs and select Leopard to boot from, and this time I lock the preferences, and restart. No joy - Tiger comes back up. Each time it confirmed to me that it had selected Leopard as the boot drive.
I bought my dad's copy of Tiger, and copies of legally obtained software for backup use are not copyright violations.
I've got an old iBook G4 that was still running Panther. It still runs fine, but I can't really do anything on it since not many new programs run on it. I had my dad make a copy of his Tiger disc to send to me online. I got it in .dmg format, converted it to .iso on a PC (no DVD burner on the iBook) and burned it with Roxio.
The DVD loads perfectly fine in the iBook, but it refuses to boot. Is there a step I missed when converting and burning it? The part I understand the least is when I open the Startup Disk preferences pane, the install disc shows up, but when I try and boot from it, all I get is the missing OS icon. Then it gives up and boots normally.
I have a fairly old laptop - a silver Powerbook G4. It was running on 10.3.9 which yesterday I tried updating to OS X Tiger (10.4).
The install seemed to work fine, and told me to restart. I followed these instructions, but my machine would not boot up after that.
It will 'turn on' - it makes the start up sound, displays the apple on the screen, then after a while moves onto a blue screen with a box in the middle which says Mac OS X, and has a loader bar with nothing loading in it. This stays the same however long I wait.
I have tried safe mode but nothing different seems to happen. I cannot use an earlier disc because I can't get the tiger disc out of my machine.
i got a ibook g3 and i cant install my copy of tiger it is on cd and cant get it to boot it reads it fine if it is on desktop but not if i hold c or key it dose however boot in other macs
View 2 Replies View RelatedI want to keep my tiger system to boot form and use. I also got SL (bugs aren't a big deal, I have my current system to use). I have a 500gb installed. I already have my tiger system on its partition. I have another all waiting to install SL. There is only a couple of applications that I always use that I will install on SL on top of the iLife stuff that comes with SL (I got the Tiger upgrade package). I don't plan on migrating them, but do a fresh install. What I'm concerned about is my airport/network and user account. If I already have my Tiger system and airport xpress working with a name, encryption and passwords.
Do I need to migrate those settings over or can I have a entirely new settings for the SL boot? IOW, does the airport store the settings and WEP Passwords and all that stuff and can't have a totally new set of settings when I boot off of SL? Also, my user account. I'm the only one who uses my computer so I just have the one admin account I set up when I first got the machine. So do I need to migrate thst over too? Or can I/should I create a totally new account for SL? Or can I create a new account, but keep the exact same name and passwords that I use under Tiger?
Installation of Leopard on my Power Mac G5 failed. After that, I can't even boot into Tiger. Whenever I power on, it just stays at the grey Apple screen. I thought changing the hard disk might help. But my experiments proved that the same behavior persists even without any hard disk. Power on, "dong", grey apple screen: that's it. What happened?
Information:
Power Mac G5 Dual 2.5Ghz, PowerBook G4 1.5Ghz, iBook G4 1.2Ghz, MBP 2.33Ghz
Mac OS X (10.5.1)
LaCie 500GB, LaCie 1TB, several iPods
I just ordered a new iMac and I'll be upgrading from a 1GHz TiBook with Tiger on it. I have some important music software that I'm not 100% sure will work with Snow Leopard, but my understanding is that it's already ok for Universal Binary. So I had the thought that maybe I could put Tiger on the iMac and dual boot. I've never dealt with a dual-boot system before, other than a couple times when I played around with Classic Mode when I still had Jaguar and/or Panther.
View 12 Replies View RelatedI have a G5 with a Tiger startup disk. I installed the HD from my retired MBP (with Leopard) into my G5 as a second hard drive. When I boot from Tiger, I can access the files on my Leopard disk, but not vice versa. I called Apple and they said it's most likely because the Leopard disk has a Laptop configuration, therefor it wouldn't look for another hard drive connected via sata. So my question is, how can I go about getting Leopard to look for another hard drive via sata? Is there an available driver?
View 6 Replies View RelatedSince I do development, I want to keep my iMac G5 at 10.4.11 (Tiger) while having 10.5.2 (Leopard) on an external drive for booting and customer support (in the meantime anyways - at some point, I may move the internal to Leopard and keep a version of Tiger on the external drive for customer support).Sounds none too difficult to achieve this. Attach external drive, insert installation CD, and follow instructions.
One thing that alludes me is the best way to make the applications available on the external Leopard boot. Can I just run them from the internal drive or will they need to be copied/installed on the external as well? Any really clear and useful resources on this type of thing?
How do I install a dual boot with tiger on the internal Hard disk and leopard on the external usb/firewire hard disk.
View 2 Replies View Relatedi know that diskutil has alot of commands and im not sure how to use them, i would specifically want to know how to use eraseDisk properly. Or is there any other way to clean install tiger without using darwin? I know eraseDisk gives me a format to use but i never get it right for some reason. diskutil eraseDisk "Journaled HFS+" MacintoshHD bootable /dev/disk0 -- this works i got it right now but it gives me this error: could not unmount disk for zeroing
View 7 Replies View Relatedso I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
View 2 Replies View RelatedI recently bought a usb HD and have put my carbon copy images on it. But i need to roll back to an earlier time. And the mac isnt booting to the OS. How do i boot from usb and restore the image?
View 24 Replies View RelatedI installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
I have the CD version of tiger and am trying to install it to a recently purchased iMac G3. The Installer installs disc 1, resets, but doesn't boot up to install disc 2, it simply asks again to install disc 1. The Mac for some reason will not boot from the installed software and therefore I cannot complete installation. Can anyone figure out why the mac refuses to boot from the HD in order to install disc 2?
Info:
iMac, Mac OS X (10.4)
MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?
View 14 Replies View RelatedI have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Info:
MacBook, Mac OS X (10.5.6)
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
I run SSD/HDD, my HDD in the optibay is broken, I stuck it in a external and it makes finder freeze, it got bumped around too much so I want to put a new one back in the 'correct place' for a spinner, and stick the SSD in the optibay.(I figure the extra 2% of shock protection offered by the orange rubber circle things is worth the trouble of moving everything).
I am also going to buy a WD 3 platter 1TB laptop drive, and I read that they fit fine in the regular spot in MBP's (I'm going to open and measure in a min.)Anyways, there's no BIOS, only EFI, so how to I pick what drive to boot from? with 10.6 is it as simple as holding option down on boot, and picking my 'OSX' HDD, and then it will auto boot from that until I specify otherwise? (I ask because before 10.6 people on here were always talking about how to switch boot drives.)
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
Im trying to reinstall osx from my flash drive. The problem im having is after i hold option and click on the flash drive icon to boot it, nothing happens the arrow icon greys out like its being click, but it does nothing.
I also tried installing from the dvd with the same result. Im posting here because I searched google far and wide and have come up with nothing. Anyone know whats going on here?
I am currently running an Imac (white) with Tiger. I run pro tools and its not compatable with leopard yet. Im trying to figure out a way that I can get a new macbook and run both tiger and leapord so that I can run pro tools.
View 1 Replies View RelatedCan a Macbook that runs on 10.4 Tiger be upgraded to 10.6 Leopard?
I bought a used Macbook. It has the following specs:
MacBook 2,1
Intel Core 2 Duo
2.16 GHz
4 GB Memory 667MHz
I reformated the Mac for a fresh start (20GB+ of the space were used up and the seller claimed that everything was erased)
However, the sad news is that the discs that the seller sent me appear to be 10.5.2 Tiger. In the auction, seller claimed that the OS is upgraded to 10.4 Tiger. When I tried to install, I get the error saying that "This software cannot be installed."
So... now it looks like I will have to buy an installation disk?
My question is will this laptop be able to run a 10.6 Leopard (I just put this example in because it seems to be the most popular one or something. I am new to Mac.)? Or will I receive the same error for that 10.5 Tiger?
Currently, this laptop has no OS installed.
I have a 2006 macbook with Leopard. I need to use the garage band that came with my original Tiger installation discs. The problem is that my CD R/RW is broken and will not read any CD.
I read some tutorials to boot from a flash drive, but need to read from the optical drive in the same machine.
I need to make a flash drive with a bootable tiger from my PC.
Just bought a Power Mac where the drives were wiped and may not have an OS X disc with it. Can I use the 2 discs that came with my Macbook Pro? They are OS X.
View 3 Replies View Related