OS X :: MacBook Won't Boot Tiger From Its Install Disk?
Dec 27, 2009
I was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
View 8 Replies
ADVERTISEMENT
Oct 27, 2010
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies
View Related
Jun 12, 2009
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
View 7 Replies
View Related
Dec 21, 2007
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
View 24 Replies
View Related
Feb 20, 2010
I bought my dad's copy of Tiger, and copies of legally obtained software for backup use are not copyright violations.
I've got an old iBook G4 that was still running Panther. It still runs fine, but I can't really do anything on it since not many new programs run on it. I had my dad make a copy of his Tiger disc to send to me online. I got it in .dmg format, converted it to .iso on a PC (no DVD burner on the iBook) and burned it with Roxio.
The DVD loads perfectly fine in the iBook, but it refuses to boot. Is there a step I missed when converting and burning it? The part I understand the least is when I open the Startup Disk preferences pane, the install disc shows up, but when I try and boot from it, all I get is the missing OS icon. Then it gives up and boots normally.
View 8 Replies
View Related
Aug 11, 2009
I have a fairly old laptop - a silver Powerbook G4. It was running on 10.3.9 which yesterday I tried updating to OS X Tiger (10.4).
The install seemed to work fine, and told me to restart. I followed these instructions, but my machine would not boot up after that.
It will 'turn on' - it makes the start up sound, displays the apple on the screen, then after a while moves onto a blue screen with a box in the middle which says Mac OS X, and has a loader bar with nothing loading in it. This stays the same however long I wait.
I have tried safe mode but nothing different seems to happen. I cannot use an earlier disc because I can't get the tiger disc out of my machine.
View 1 Replies
View Related
Apr 18, 2009
i got a ibook g3 and i cant install my copy of tiger it is on cd and cant get it to boot it reads it fine if it is on desktop but not if i hold c or key it dose however boot in other macs
View 2 Replies
View Related
Aug 4, 2007
i know that diskutil has alot of commands and im not sure how to use them, i would specifically want to know how to use eraseDisk properly. Or is there any other way to clean install tiger without using darwin? I know eraseDisk gives me a format to use but i never get it right for some reason. diskutil eraseDisk "Journaled HFS+" MacintoshHD bootable /dev/disk0 -- this works i got it right now but it gives me this error: could not unmount disk for zeroing
View 7 Replies
View Related
Feb 7, 2009
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
View 2 Replies
View Related
Apr 28, 2010
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies
View Related
Oct 11, 2009
My Macbook is starting to get really slow. I've tried Onyx and it told me that the startup volume had to be fixed. But I can't boot my install DVD by pressing "C" in the startup.
Is there another way to repair the disk?
View 8 Replies
View Related
Jun 13, 2012
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
View 1 Replies
View Related
Oct 3, 2010
So I restarted, hit option until "Macintosh HD" showed up. Then I hit "c" and "Mac OS X Install Disc" showed up. So far so good.
I then selected the CD, and hit enter. It started to boot up and my cd drive started to make whirring noises, so I knew it was all good. And then, it went into the grey screen with the Apple logo in the middle. However, with it taking a long time, I went for my usual jog (it was my jogging time anyways). But when I came back (over an hour later) it was still on the grey screen with the apple logo.
View 7 Replies
View Related
Jun 28, 2008
Ok, my WD Raptor is both getting too small, and too slow (long in the teeth) so I sunk down for 2xVelociraptors to use for my boot in RAID 0..
I know how to add drives and do RAID in terms of adding drives for storage, but how can I migrate my OS X, Applications, and Preferences to a new boot drive, much less a RAID 0?
do I need to first install the disks into my case and format them for RAID 0, then install OS X as a boot disk on them, the lastly copy over my Applications folder, Library and Users folder?
View 3 Replies
View Related
May 6, 2009
Right now I am booted into the GParted live cd, and I am wondering if my computer will even be able to boot into the OS X install disc if I delete every single partition on my HDD. I am going through a roundabout way of removing ubuntu. Will I be able to boot into the OS X install disc and do an install if I delete every single partition, and leave my HDD completely blank and unformatted?
View 4 Replies
View Related
Jun 10, 2010
I am unable to get my OS 10.4 Installer DVD to mount or boot my G4, currently running OS 10.4.11, though it mounts and boots other of my Macs and I am able to boot and mount a 10.1 DVD with my current Pioneer DVR-1060 drive. I would like to run a hardware test on my mac as I recently had one of my hard drives die and just want to check everything. So does not seem to be the drive and does not seem to be the DVDs. I zapped the pram, reset the open firmware and ran diagnostics using Applejack and everything checked out okay with my current internal drive.
View 5 Replies
View Related
Jul 6, 2010
I need to boot into Disk Utility to repair my OS X partition but don't have my Snow Leopard install disc with me. I tried using a Leopard disc from my previous computer but got a gray screen when I tried it. Is there a way to create a new CD that will allow me to access Disk Utility from startup?
View 5 Replies
View Related
Feb 18, 2012
So how would I boot up on a install disk for Lion because I got Lion from the Mac App Store not on disk. So how do I boot up from the disk...?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7)
View 3 Replies
View Related
Feb 23, 2009
First timer here. I bought a used G4 MDD 1.25 dual FW800 recently. Was pre-loaded with 10.5.6. I thought that I would add a hard drive. After attempting to format, it rebooted to a gray screen with a MacMonitor icon. If I hit "option", I can get it to progress to a blue screen w/ padlock asking for a password. I only remember setting a user password. I believe this is asking for an admin password.
So, I thought that I'd get the 10.5.6 Install disk to reset the password. I can't seem to boot from the Install disk! I've tried holding down the "c" key at startup, (also the "option" key). No avail.
View 4 Replies
View Related
Sep 7, 2009
running OS X 10.5.8 on a MacBook Pro. Lately my mac has been buggy, and I'm not sure why. When a decent amount of information is processed by any given application, it crashes. These crashes have included Mail, Safari, Photoshop, Foxfire, etc.. even the entire computer has shut down. Using the reset option does not help. I ran Repair Disk Permissions and it always fails. I get messages like "The Underlying Task Reported Failure on Exit". I wanted to try to run repair disk through the install disk but I cannot access it. I have Disk 1 in (Maybe I'm supposed to use 2?).
When booting I tried pressing 'C' and would eventually would get the "must restart" gray screen. I then tried pressing "Option" instead, selected the Disk drive, but the loading screen with the apple just kept going for about 20 minutes and I finally gave up and restarted. There were no longer any disk attempt whirring sounds.
View 4 Replies
View Related
Jun 18, 2010
i have read various threads about this but can't find a cure, here is what's happening:
1) Was running disk utility and said i have a corrupted disk
2) OSX runs fine but i can't reboot into startup disk in order to repair disk
3) Can only boot into OSX now by holding down Option key and selecting OSX
4) Can't use this method to boot into install disk or external drive.
Remedies, I have done the following:
1) Repaired permissions
2) SMC reset
3) PRAM reset
4) Wont allow me to safe boot
5) Won't allow me to boot from install disk
6) Won't install SL disk to try and repair install
View 2 Replies
View Related
Mar 22, 2012
My mac mini is coming up install boot disk and press any key. Now i have just put a new 500gb hard drive in and put new memeory in which is 2 x1GB
But i cannot get it too work i have tried the original Apple discs but still no joy.
View 4 Replies
View Related
Sep 24, 2009
I've got a Powermac G5 desktop. I recently purchased a used keyboard for it off of Ebay. The computer was working fine with just a mouse. Shortly after the keyboard was plugged in, I got a kernel panic, and had to restart. I restarted, and immediately got a message saying "you need to restart your computer", and followed by another kernel panic.
Now, I get a kernel panic and "restart your computer" message, even if the keyboard is unplugged.
I was planning to do a clean install of OS X anyway, and figured that since the computer is completely useless at this point, now would be a pretty good time to go ahead and do it. So I tried to boot from the install CD by inserting the CD and holding down the 'C' key. No result -- it doesn't show me the "boot menu", and instead proceeds as usual, to it's "Restart your computer" message and subsequent kernel panic.
So I then tried rebooting and holding down the "Option" key, and managed to get to the boot menu. I selected "Mac OS X Install Disc 1" and clicked the "--->" button ... kernel panic again.
I'm at a complete loss for what to do next. Any help with this would be much appreciated. All I want to do is reinstall OS X.
How can there be a kernel panic from the boot CD? Apple didn't make it where it tries to use the kernel from disk during install did they?
I'm coming from a Linux background, and am not at all familiar with OS X, so forgive me if I've left information out that I should have included. Please let me know if this is the case, and I'll do what I can to provide it for you.
View 3 Replies
View Related
May 3, 2008
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies
View Related
Feb 5, 2009
Any one know how to do the boot up mention above?
View 4 Replies
View Related
Jun 30, 2012
The option for "Repair Disk" in my Disk Utility is not available. I have a Macbook2, 1, running on Tiger.
Info:
MacBook, Mac OS X (10.4.11)
View 2 Replies
View Related
Nov 10, 2010
I have a 2006 macbook with Leopard. I need to use the garage band that came with my original Tiger installation discs. The problem is that my CD R/RW is broken and will not read any CD.
I read some tutorials to boot from a flash drive, but need to read from the optical drive in the same machine.
I need to make a flash drive with a bootable tiger from my PC.
View 1 Replies
View Related
Apr 27, 2009
Just bought a Power Mac where the drives were wiped and may not have an OS X disc with it. Can I use the 2 discs that came with my Macbook Pro? They are OS X.
View 3 Replies
View Related
Feb 8, 2009
My friends got a white Macbook with 80gb HD, 1gb ram, 2.0 intel, runs tiger, 38GB free space on hard drive. So the problem is that i tried to install leopard on the computer, i followed the instructions for how to install, but it wont install, it says cannot install on this computer. This computer is fully capable of using leopard, plenty of HD space. And it the reason it gives for not installing is: Newer version of this software/program, already exists. I saved her photos on a DVD b/c thats all shes worried about keeping saved.
View 13 Replies
View Related
Jun 11, 2012
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Info:
MacBook, Mac OS X (10.5.6)
View 3 Replies
View Related
