OS X :: Wont Boot Of Tiger Install Dvd / Can't Install
Jun 12, 2009
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
I bought my dad's copy of Tiger, and copies of legally obtained software for backup use are not copyright violations.
I've got an old iBook G4 that was still running Panther. It still runs fine, but I can't really do anything on it since not many new programs run on it. I had my dad make a copy of his Tiger disc to send to me online. I got it in .dmg format, converted it to .iso on a PC (no DVD burner on the iBook) and burned it with Roxio.
The DVD loads perfectly fine in the iBook, but it refuses to boot. Is there a step I missed when converting and burning it? The part I understand the least is when I open the Startup Disk preferences pane, the install disc shows up, but when I try and boot from it, all I get is the missing OS icon. Then it gives up and boots normally.
I have a fairly old laptop - a silver Powerbook G4. It was running on 10.3.9 which yesterday I tried updating to OS X Tiger (10.4).
The install seemed to work fine, and told me to restart. I followed these instructions, but my machine would not boot up after that.
It will 'turn on' - it makes the start up sound, displays the apple on the screen, then after a while moves onto a blue screen with a box in the middle which says Mac OS X, and has a loader bar with nothing loading in it. This stays the same however long I wait.
I have tried safe mode but nothing different seems to happen. I cannot use an earlier disc because I can't get the tiger disc out of my machine.
i got a ibook g3 and i cant install my copy of tiger it is on cd and cant get it to boot it reads it fine if it is on desktop but not if i hold c or key it dose however boot in other macs
I was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
Anyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
I have no experience with any Apple OS prior to Snow Leopard. My daughter has an old M6498 G4 800 mhz, 60GB machine with a grey screen. Went through the steps listed in Apple Support. Disk repair would not work, archive would not work and ended up having to do the "erase and install" with a Replacement DVD sent to us by Apple. After many updates the computer is now booting up with OS 10.4.11 and Safari 4.1.3 installed.
I have a Replacement DVD of iWork '05 sent by Apple which was previously installed on this same machine before the problem with the "grey screen" and hard drive not working. Attempting to reinstall iWork but the iWork '05 DVD does not display in Finder or Preferences.
I just obtained a PowerPC G4 Tower, but there was no hard drive in it. Because of this, I put in an older 20 gb hard drive I had just laying around. It is from an old Windows PC I had, but I don't know if thats a problem or not. Anyways, when I try to boot from the Tiger disc, nothing happens. I have tried holding down C when I turn the mac on, but that doesn't help at all. I just always get the mac icon with a question mark in the middle of the screen. I am just wondering, is this anything to do with the PC hard drive I put in the mac? Or is there something else that I am doing wrong? I just want Tiger to be installed on the computer.
Recently my parents just bought a Macbook with Leopard on it. I own a three year old Macbook that runs Tiger. I saw this as a chance to upgrade to Leopard. I tried to install Leopard on my Macbook but it says that it can't install on my machine. I've searched various places but I've gotten vague answers. Is it because the disk is hardware specific (From what I've heard) or is it something else and I'm not getting it?
I have a late 2007 MBP running Tiger (10.4.11). I recently purchased a new iMAC that came with SL (10.6.1). I have tried twice to use this DVD to upgrade my MBP from Tiger to SL, but it keeps telling me that OS X can't be installed on this machine. Do I need to use an UPGRADE DVD to actually do the Upgrade?
I am trying to install Tiger on a G3, 500mhz, 1gig ram that I was recently given and need to install a larger hard drive. I have the Tiger CD's and a 80 GB HD that was on a PC before. Since it only holds one HD how can I format it and install this OSX on this machine? Can the BIOS be set to boot from a CD?
I have an original Tiger 10.4 install disk for a G-5 computer. When I boot up the computer with the install disk everything is fine. However when I run Disk Utility the only option I have for formatting the partitions is MS-DOS or free space. No Mac OS X formats are offered. If I run a 10.5 Install disk I am offered the options in Disk Utility to use Mac OS X HDD formatting. Any one have any idea what I need to do to get DU in Tiger to format the HDD in Mac OS X format? BTW, the HDD's in the unit are pre-formatted in Windows NTFS if that makes a difference. I just want to make sure Tiger supports Mac OS X format before doing anything else.
I have a PPC ibook g4 with panther, i have the Tiger DVD but when i try to install, i put the dvd restart the machine press C but after that i just can see the gray screen with the apple simble and nothing more. I tested the dvd and i can open everything when i'm using panther.
So I have a few ibooks at the time I didn't have actual copy of mac os x and needed to erase the HD so I hooked 2 of them up by firewire cable in target disk mode. I was able to erase that way except I don't know if messed anything up there are 2 spaces in disk utility that will something like 37.0 fujitsu and then underneath it would say Macintosh HD well I wrote zeros to both took about 25 minutes then I get a copy of mac os a few days later try to drag the source mac os x tiger into destination the one that says fujitsu 37.0gb (by the way I'm doing this all with external monitor cause they have cracked screens). I shut the ibook off then power it on by itself it will start the installer for tiger and ask what volume I want to install it on and the picture of the harddrive that you are supposed to click isn't coming up I can't select anything it's blank. If the harddrive is bad then why would I be able to copy the source mac os x tiger onto it ? but won't let me install on the HD.
How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
I just bought a G5 iMac 17" that had no hard drive. I have an old 160 gig drive to install, but there is something wrong with the optical drive and I can't insert an install disk. What I thought I could do is connect the 160 gig to my MacBookPro (OS X 10.7.4) and install Tiger to the USB drive. No go! I get a message that PPC is not supported. I tried booting from the install disk but my Mac bypassed it and booted into 10.7.4. What else can I do to get a compatible OS on the drive?
I have a used G4 from a university surplus materials auction. The cpu had been purged of all programs and operating system. I attempted to install Tiger but installation stops at designating drive location.
I have a 2006 macbook with Leopard. I need to use the garage band that came with my original Tiger installation discs. The problem is that my CD R/RW is broken and will not read any CD.
I read some tutorials to boot from a flash drive, but need to read from the optical drive in the same machine.
I need to make a flash drive with a bootable tiger from my PC.
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
i have:a power mac g4 with a cd drive running panther a macbook pro with a dvd drive running leopard.i want to put tiger on the power mac bc it cant run leopard.and i have tiger on dvd. but i don't know how to share the dvd drive.or if making an iso of tiger on a hard drive and mounting on the power mac will work.
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
my problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
I've searched google but cant find an answer to my question.
I have an external HD, partitioned into 2 volumes, where 1 volume is empty and I want to install Tiger onto this volume.
Trouble is when I boot into the install CD and try to install on this volume it says that it 'cannot install on this volume.Mac OS cannot boot into this volume.'
I found on google that when partitioning the whole ext. HD, there is an option about a GUID or something which allows the drive be bootable.
This would be useful but it would wipe my whole drive, including the other volume.
I do not want to do a clone of my int. HD, and SuperDuper! it onto the ext. HD.
