I recently upgraded my old Airport Extreme Base Station (looks like a lumpy cap) to a newer AirPort Extreme Base Station with dual-band support and 802.11n. I installed the software on my Macbook running Snow Leopard, created a new set up with new passwords, etc. The Macbook and a G4 12" rev A PowerBook running OS 10.3.9 connect fine, but a G4 500 GHz Sawtooth, running OS 10.3.9, with an original Airport card installed will not connect. Initially the new networks showed in the AirPort inverted triangle bars, but now the triangle is grey, and I can't get any connection with Internet Connect or the network diagnostic that comes with the OS. 2 out of three ain't bad, but I want all the computers to connect.
I have a powermac G4 Sawtooth and the power supply recently decided to go, My question is, is there a way to tell if I have a Rev.1 or Rev.2 just by looking at the board? Markings on the case and PSU don't help because I bought a Replacement Motherboard for it which had wider white plastic clips, I need to know because I am not sure if i need the 237W PSU or the 200W PSU.
I'm working on upgrading my 400MHz Sawtooth. I'd like to take it to the maximum 2 GB of RAM, but since I already made the mistake of buying high density instead of low, I thought I'd ask before making another purchase.
As far as I know, these are the right specs for my machine:
so my pc ftp server starts being a bh so i put all the drives into my pm g4, press power it chimes, screen is blank, i have followed the 'my mac won't boot guide' so please don't point me to that
I've been a PC user for many many years, but have had a G4 Sawtooth for about 3 years now, its only a 400Mhz model, but I have just placed a 533Mhz G4 in there, and apparently I need to use a dip switch? I just got a standard sized dip switch, so thats not a problem, I was wondering two things:
1. If anyone has a Sonnet for sale instead of using the G4 or 2. If you can offer up some advice on the easiest way for my G4 to recognise the new 533 CPU?
I've got GSA-H20L LG lightscribe drive but the only problem is that the lightscribe drivers I got from versiontracker have to no avail helped me, I also tried disclabel.
Is there anyway via drivers/program to get lightscribe to work on this sawtooth?
trying to install Tiger on a 350mhz Sawtooth - problem is the computer won't read the dvd/cdrw drive (it did fine before I formatted the HD). I try holding C, it does nothing, tried reseting PRAM, nothing.
Well, using some guides (check bottom of post), I did some experimenting with my old G4 Sawtooth to see how fast I could run its lame 400mhz cpu. Ultimately, my goal was to make Quake 3 playable at a resolution other then 800x600. These tests were all done with PC-133 ram (896MB), running 10.4.11.
Starting specs: 400mhz (4x100mhz) Xbench cpu score: 19.9 1st overclock (with 400mhz cpu): 500mhz (5x100mhz) Xbench cpu score: 29.3 Note: This was incredibly unstable.
In the process of moving to 450mhz on the 400mhz stock cpu, one of the jumper resistor solder pads came off (lame 10 year old glue). So, I went on ebay and got 5 450mhz G4 cpus for 50$ CDN after shipping. One of them came dead, and one failed after the jumper change.
2nd overclock (with 450mhz cpu): 500mhz (5x100mhz) Xbench cpu score: 22.3 Note: This sucked. Now really stable, but I didn't get a performance gain like I got with the 400mhz cpu, and Quake 3 still ran like crap.
So here I decided to do the FSB overclock. Knowing I would end up with 4.5 x 133 which would be too fast, i jumpered a cpu to 3.5 multiplier for a 466 clock. This never booted. I put in a 450mhz chip and...
3rd overclock (with 450mhz cpu): 533mhz (4.5x133mhz) Xbench cpu score: 25.6 Note: That multiply doesn't make sense. It shouldn't be 533. But hey, it worked, stable, and I got a performance gain.
Note: Ok, the clock is still not right. This is the same cpu that did the 5x100 so I know the multiplier is set right. But hey, its doing better in the scores! Conclusion: Success! 533mhz seems to be the top out with the NVRAMRC script in place. But there is a considerable performance gain everywhere (booting, app loading, etc). Most importantly, my Quake 3 now runs very smooth @ 1280x1024 with max graphics settings. I am a very happy camper. I can take pictures of the solder job if anyone requests them. I do recommend this if you have some good technician skills.
i recently bought a secondhand mac g4/400 and ive been trying to startup to install tiger (am using a macbook pro for work). i tried both of the ultra ata 'bays' but am wondering whether normal IDE drives will work?
i have:
1X western digital (caviar) enhanced IDE drive and 1X seagate normal IDE drive (ST340015A)
the cd-rom works fine on its own and can boot up with panther install discs but when selecting startup disc there is nothing. I connected the cdrom to the far end of the cable (set jumper to master) and WD E-IDE drive to the second 'block' (set as slave)
i am under the assumption that because the cdrom works there is nothing wrong with the cables.
on boot up I cant select the startup drive (just network) as there is only one device detected (CDROM) if harddrives are disconnected
I get the network folder first on boot up then question mark/folder icon
not quite sure how to proceed from here. is formatting a must for the normal IDE drive? or will the mac pick it up regardless.
I connected both drives to existing cables and the normal IDE drive also to IDE (PC) cable also reset the PMU/SMU as well as took out all daughterboards and tested RAM which appears to be ok. i also took out the battery and put it back.
the PSU seems fine, but is there a way i can check with diagnostics or something..
I running a 400MHz sawtooth Family #M5183 my friend gave me with a 40 gig hard drive running OSX 10.3.9. I just picked up at the swap meet a Qwicksilver Model No.M849 PNG4 1GHZ DP/2M CACHE/512MB SDRAM? 80GB HD DVD-R/CDRW/Nv17 DUAL/56k MDM/GIGE it is missing the HD from under the superdrive can I just plug in the HD from my Sawtooth and run her? She still has the HD in the bottom its a 80 gig IBM Deskstar. When I opened my Sawtooth I found that there is a Seagate Cheetah model#*ST118202LW* Its not even plugged in!!! How many gigs is it and can i run it for more space? I have three 512 cards for memory. Can I use the video card from the sawtooth to run a second monitor? If this all works whats the newest operating system I can run? As soon as I get the money I am going to swap the processor and bring her up to speed. I am a singer/songwriter on a budget trying to put my studio together,I run live sound and make Hand Drums.I'm not a computer tech by no means but I do ok running a mouse to get a good sound. If you are going to tell me to wrap machine in tin foil and put it in the freezer PLEASE don't waste my time!!!!! I just want to build my machine correctly and not f@#$ anything up.
I want to do this to increase the speed of my sawtooth. I think that the dual 500mhz was the last apple processor that is compatible with the sawtooth because they both run on 100mhz busses, correct?
I have recently upgraded my wireless network to N+ using a Belkin Modem Router. Security is WPA2-PSK, and MAC access is disabled. All MacBooks (Leopard & Tiger), PCs (XP) and iphones connect without any problem, however my daughter's PowerBook G4 running OS X 10.4.11, and with the most recent Airport software, can't connect to the network. The password prompt when selecting the network only allows for entering a WEP password.
I have been trying to connect my PS3 to my iMac for the past couple of days but with no success. Airport is on and broadcasting through the card built into my mac but it keeps saying "it can't connect to the server." I have connected my ipod touch and Wii with no problem through airport but for some reason it won't work with the ps3. Any suggestions or help?
This is driving me crazy. I bought a Belkin F5D9050 802.11g compatible usb wireless card, and it will not recognize my airport express!
I have changed the settings in windows, and know the drivers are correct, it just won't find it as a online router/hub.
It says the network is unavailable, and there was an issue setting up wireless, it is like the windows wireless setup and the card are competing, so I cancelled the windows g setup and still nothing.
I am running SP 3 for XP, and tried chatting Belkin support and no one knows.
I installed Airport Utility, and etc and still doesn't connect.
The only flicker I had was when I went into my mac and tried creating another network, and then it signaled a device, but would not connect.
After packing away my little brothers sawtooth 400Mhz with 384mb RAM and an 8Mb ATI AGP graphics card and then unpacking it I've been having a problem. When starting the computer up the screen shows nothing at all I have tested to see if the screen is broken and it seems to be functional. I think the card itself might be broken? BTW, I'm using the VGA slot and not the DVI slot on the back. I have also removed and cleaned the card just incase that might've been the problem.
Today I was planning to build in a second harddrive into my old G4 tower. So I did this. But after installing the system won't boot anymore from the OS X Tiger partition. I have tried all sorts of jumper settings, from slave to master to cable select. All without success.
When I boot from the Tiger installation CD diskutility does not even recognize my original master drive nor does it recognize the new slave drive. I even tried to boot from an old OS9 disk to initialize the disk. I tried formatting it in another machine to HFS Journaled, no success in booting mounting the disk whatsoever.
I recently added some extra RAM's but i doubt these are the problem since my machine DOES boot without having the new disk installed in the system.
It is a 60GB Maxtor drive, so it is within the maximum amount of GB's possible for these older machines.
Recently moved and had a net connection installed yesterday, the guy set it up and it connected fine up until last night when i decided to mess around with OSC control and had to set up my own local network to do it.
Now today I'm trying to connect to the net again back on the default 'automatic' location (i made a seperate location for the OSC to try and avoid this sort of trouble) - and although Airport is picking up the router and is saying it HAS got an IP address, the internet is still not connecting.
I've done a few common sense diagnostic checks, its not Firefox becuase I'm running Little Snitch and thats not showing any movement either..I checked that its automatically configuring using DCHP and supposedly wiped the network settings by deleting the .plist files but its still doing the same thing: reporting that it's connected and has an IP address, but still with no connectivity.
Diagnostics says it 'appears to be connected' but the Network Setup Assistant gets to the last stage of the setup and asks me to check my diagnostics because it can't connect. When seconds later it has an IP and is 'connected'.
My computer stopped connecting automatically to my airport. I have it as remembering the password, and the password is saved in keychains. In the network system preferences, I have it set as a preferred network. However, every time I wake my computer up or bring it back to the house it says it can't find any of my networks, and asks me to choose from a list (which contains my airport). When I click on it, the password is already there, and I tell it to remember this network, but it never does.
After installing OSX 10.4 on my wifes' Clamshell iBook 466 Firewire, and accepting several software upgrades to 10.4.11, I was annoyed to find that the AirPort Card would not connect automatically on start-up. This seems to be as a result of the AirPort software upgrade to version 4.2.
There seems to be no way of reverting back to the previous version, leaving us with the problem of having to connect manually. This involves several steps, starting with choosing "Other" from the AirPort drop-down menu, selecting the network from a drop-down list, then selecting the WEP option from the next drop-down, entering the Password and clicking 'OK' to complete the connection process.
So I used the internet this morning no problem. I come home this evening and can't connect wirelessly with my airport. Every time I open Safari and type in an address I get this message:
IP Configuration
192..... in use by 00:1f:a......, DHCP Server 192....
My brother has wireless internet for his house which is wha I connect to.
A friend of mine gave me a iMac a couple of weeks ago. i upgraded the RAM to 1GB and I bought a Airiport Card (802.11b)
I plugged in the card and attached the antenna to the card and tuned on the mac. But when i try to find a wifi network (mine for example) it won't connect. Im using a DIR-655 Dlink router. i have mixed mode emabled (802.11b/g/n) and WPA-Personal Encryption (AES Cypher)
Why is it not connecting?
PS the message i get when i connect is "There was an error connecting to network [network name]"
My airport doesn't seem to be working. It's completely connected--I even ran through the diagnostics and it said nothing can be done for it--but it won't pull up a Safari page, let me log into AIM, or check my Mail. It works fine when I plug an ethernet into it, and I've tried restarting my computer multiple times, and I reset the DHCP, too, and nothing.
Just how do I connect a G4 to an Airport Extreme Base station via LAN cable, and then get it to connect to an existing wireless network (that's using a non Mac router). It's just that the existing airport card is painfully slow with a NAS and as I had the AE kicking about I thought I'd use that rather than buying a new PCI AE card.
I have an apple airport (age unknown), but it is one that looks like a mushroom cap. I have a network set up in WPA2 format. A nintendo DS user wishes to connect to wifi, but requires a WEP set up. Can I run both kinds of network or must a switch back and forth (since I like WPA2 more)?
I'm looking into buying a wireless router, I have a macbook pro and wanted to ask how the Airport express is. Is it a good router? Ill be living in a 2 bedroom apartment so the range I'm assuming should be good. Can I connect a printer or my external hdd to it?
I have a standard wireless network for the Internet, and have just bought an airport express to make my printer wireless -- thinking I could use it to create a second, separate network (with no internet connection) that just connected to the printer.
I realize that I'd have to switch networks from the Internet to the Printer if I wanted to print, and vice versa. No big deal.
But it didn't work so far. Maybe my theory is faulty.
I'm wondering if I need to also connect it via an ethernet cable to the wireless router.
Or I've just bungled the setup.
I have a MacBook with an 802.11G airport card. The express (and router) can do N as well as G.
