I have an old sawtooth and like many people find the prices of the original airport card to be a bit inflated.
I read that lucent Wavelan silver, bronze, gold cards are backwards compatible with the original Airport specs.
Does anyone know if this works for certain? If it does, I'd like to pick one up cheap from ebay and stick it in my Sawtooth.
I move into my new place next week and find that the only source of internet will have to be through a wireless router. So now I am need of a Airport card. I have a 2005 iMac G5 (the generation right before the built-in iSight). I know that I need a Airport Extreme Card and an antenna, but I was wondering if somebody could fill me in on the exact part numbers I need for iMac. I've seen lots of different airport cards and do not want to buy the wrong one. If anyone can help me, that would be great.
View 11 Replies View RelatedI have a powermac G4 Sawtooth and the power supply recently decided to go, My question is, is there a way to tell if I have a Rev.1 or Rev.2 just by looking at the board? Markings on the case and PSU don't help because I bought a Replacement Motherboard for it which had wider white plastic clips, I need to know because I am not sure if i need the 237W PSU or the 200W PSU.
View 4 Replies View RelatedI'm working on upgrading my 400MHz Sawtooth. I'd like to take it to the maximum 2 GB of RAM, but since I already made the mistake of buying high density instead of low, I thought I'd ask before making another purchase.
As far as I know, these are the right specs for my machine:
-PC100 (or faster) SDRAM
-low density
-non-ECC
-max 512 MB
-double sided
so my pc ftp server starts being a bh so i put all the drives into my pm g4, press power it chimes, screen is blank, i have followed the 'my mac won't boot guide' so please don't point me to that
View 9 Replies View RelatedI've had this computer for many years and it has been trouble free. Recently, however, it's been losing the wifi signal. It'll keep it for a while, but then I'll see it fluctuate and eventually die. I can't seem to bring it back to life. I have an iPhone, apple tv and a laptop that all seem to have no trouble pickng up the wifi signal. Would this be a software or hardware issue? Could my airport card be dying? If so, is it fixable?
View 3 Replies View RelatedI've been a PC user for many many years, but have had a G4 Sawtooth for about 3 years now, its only a 400Mhz model, but I have just placed a 533Mhz G4 in there, and apparently I need to use a dip switch? I just got a standard sized dip switch, so thats not a problem, I was wondering two things:
1. If anyone has a Sonnet for sale instead of using the G4
or
2. If you can offer up some advice on the easiest way for my G4 to recognise the new 533 CPU?
I've got GSA-H20L LG lightscribe drive but the only problem is that the lightscribe drivers I got from versiontracker have to no avail helped me, I also tried disclabel.
Is there anyway via drivers/program to get lightscribe to work on this sawtooth?
trying to install Tiger on a 350mhz Sawtooth - problem is the computer won't read the dvd/cdrw drive (it did fine before I formatted the HD). I try holding C, it does nothing, tried reseting PRAM, nothing.
View 4 Replies View RelatedWell, using some guides (check bottom of post), I did some experimenting with my old G4 Sawtooth to see how fast I could run its lame 400mhz cpu. Ultimately, my goal was to make Quake 3 playable at a resolution other then 800x600. These tests were all done with PC-133 ram (896MB), running 10.4.11.
Starting specs:
400mhz (4x100mhz)
Xbench cpu score: 19.9
1st overclock (with 400mhz cpu):
500mhz (5x100mhz)
Xbench cpu score: 29.3
Note: This was incredibly unstable.
In the process of moving to 450mhz on the 400mhz stock cpu, one of the jumper resistor solder pads came off (lame 10 year old glue). So, I went on ebay and got 5 450mhz G4 cpus for 50$ CDN after shipping. One of them came dead, and one failed after the jumper change.
2nd overclock (with 450mhz cpu):
500mhz (5x100mhz)
Xbench cpu score: 22.3
Note: This sucked. Now really stable, but I didn't get a performance gain like I got with the 400mhz cpu, and Quake 3 still ran like crap.
So here I decided to do the FSB overclock. Knowing I would end up with 4.5 x 133 which would be too fast, i jumpered a cpu to 3.5 multiplier for a 466 clock. This never booted. I put in a 450mhz chip and...
3rd overclock (with 450mhz cpu):
533mhz (4.5x133mhz)
Xbench cpu score: 25.6
Note: That multiply doesn't make sense. It shouldn't be 533. But hey, it worked, stable, and I got a performance gain.
4th overclock (with 450mhz cpu):
533mhz (5x133mhz)
Xbench cpu score: 29.3
Note: Ok, the clock is still not right. This is the same cpu that did the 5x100 so I know the multiplier is set right. But hey, its doing better in the scores!
Conclusion: Success! 533mhz seems to be the top out with the NVRAMRC script in place. But there is a considerable performance gain everywhere (booting, app loading, etc). Most importantly, my Quake 3 now runs very smooth @ 1280x1024 with max graphics settings. I am a very happy camper. I can take pictures of the solder job if anyone requests them. I do recommend this if you have some good technician skills.
i recently bought a secondhand mac g4/400 and ive been trying to startup to install tiger (am using a macbook pro for work). i tried both of the ultra ata 'bays' but am wondering whether normal IDE drives will work?
i have:
1X western digital (caviar) enhanced IDE drive and
1X seagate normal IDE drive (ST340015A)
the cd-rom works fine on its own and can boot up with panther install discs but when selecting startup disc there is nothing. I connected the cdrom to the far end of the cable (set jumper to master) and WD E-IDE drive to the second 'block' (set as slave)
i am under the assumption that because the cdrom works there is nothing wrong with the cables.
on boot up I cant select the startup drive (just network) as there is only one device detected (CDROM) if harddrives are disconnected
I get the network folder first on boot up then question mark/folder icon
not quite sure how to proceed from here. is formatting a must for the normal IDE drive? or will the mac pick it up regardless.
I connected both drives to existing cables and the normal IDE drive also to IDE (PC) cable also reset the PMU/SMU as well as took out all daughterboards and tested RAM which appears to be ok. i also took out the battery and put it back.
the PSU seems fine, but is there a way i can check with diagnostics or something..
I running a 400MHz sawtooth Family #M5183 my friend gave me with a 40 gig hard drive running OSX 10.3.9. I just picked up at the swap meet a Qwicksilver Model No.M849 PNG4 1GHZ DP/2M CACHE/512MB SDRAM? 80GB HD DVD-R/CDRW/Nv17 DUAL/56k MDM/GIGE it is missing the HD from under the superdrive can I just plug in the HD from my Sawtooth and run her? She still has the HD in the bottom its a 80 gig IBM Deskstar. When I opened my Sawtooth I found that there is a Seagate Cheetah model#*ST118202LW* Its not even plugged in!!! How many gigs is it and can i run it for more space? I have three 512 cards for memory. Can I use the video card from the sawtooth to run a second monitor? If this all works whats the newest operating system I can run? As soon as I get the money I am going to swap the processor and bring her up to speed. I am a singer/songwriter on a budget trying to put my studio together,I run live sound and make Hand Drums.I'm not a computer tech by no means but I do ok running a mouse to get a good sound. If you are going to tell me to wrap machine in tin foil and put it in the freezer PLEASE don't waste my time!!!!! I just want to build my machine correctly and not f@#$ anything up.
View 6 Replies View RelatedI want to do this to increase the speed of my sawtooth. I think that the dual 500mhz was the last apple processor that is compatible with the sawtooth because they both run on 100mhz busses, correct?
View 4 Replies View RelatedSo tomorrow I'm going to be getting a Powerbook G4 from a friend. He says there are two problems with it.
1. The Graphics. I haven't seen it personally, but he says every time the laptop starts up, the display has a bunch of parallel vertical lines running down it. Is this a hardware issue, and is it easy to replace? Or can an update fix it? I wonder because isn't the integrated graphics mounted on the logic board?
2. The WiFi Card. I remember the day he got it, we both say the WiFi worked like a charm. One day, it pooped out on us. Now, the only way for internet is by ethernet. Did something possibly unhook from it, or is it a bad card? Once again, a possible update for it?
I won't know for certain until I get this laptop tomorrow. I will post updates when I can physically check it out.Also, this laptop is an older one, so no warranty or AppleCare on it. It is also running Leopard, but I doubt it is updated to the latest.
After packing away my little brothers sawtooth 400Mhz with 384mb RAM and an 8Mb ATI AGP graphics card and then unpacking it I've been having a problem. When starting the computer up the screen shows nothing at all I have tested to see if the screen is broken and it seems to be functional. I think the card itself might be broken? BTW, I'm using the VGA slot and not the DVI slot on the back. I have also removed and cleaned the card just incase that might've been the problem.
View 3 Replies View RelatedToday I was planning to build in a second harddrive into my old G4 tower. So I did this. But after installing the system won't boot anymore from the OS X Tiger partition. I have tried all sorts of jumper settings, from slave to master to cable select. All without success.
When I boot from the Tiger installation CD diskutility does not even recognize my original master drive nor does it recognize the new slave drive. I even tried to boot from an old OS9 disk to initialize the disk. I tried formatting it in another machine to HFS Journaled, no success in booting mounting the disk whatsoever.
I recently added some extra RAM's but i doubt these are the problem since my machine DOES boot without having the new disk installed in the system.
It is a 60GB Maxtor drive, so it is within the maximum amount of GB's possible for these older machines.
[URL]
How certain are we that (physical?) interference between the airport card/wifi and the graphics card can be cured with a download, and not actual hardware fix/repair? I mean, I know technology is advancing rapidly, but I'm not sure I can believe that a download can solve the issue that the 4850s are experiencing.
View 6 Replies View RelatedI would like to upgrade my 17" Powerbook G4 to wireless n, but I'd like to upgrade the internal airport extreme card instead of using a PC Card adapter.
Are there any options for this?Will this airport extreme card from early model MBPs work?
my specs:
17" pwrbk Hi-res
1.67 G4
late 2005 model: Powerbook 5,9
I have a MacPro 1,1 2x2 GHz Dual Core Intel purchased in 2007. No airport card, no Bluetooth.Is there a compatible wifi card that will work with this machine to add wifi functionality?
Info:
Mac Pro, Mac OS X (10.6.8)
* Two 2.8GHz Quad-Core Intel Xeon
* 2GB (2x1GB)
* NVIDIA GeForce 8800 GT 512MB GDDR3
* 500GB 7200-rpm Serial ATA 3Gb/s
* Two 16x SuperDrives
* AirPort Extreme Card (Wi-Fi)
* Apple Mighty Mouse
* Apple Keyboard & Mac OS
Do i need Wifi card for bluetooth/key/mouse as the logo there on the list.
im going to get my Ram/Extra Hdd from 3rd party. also
is there any catches on ADC? you spent �500 and get �1000 off a new product is that correct?
I am getting a 2008 Mac Pro and i need a wifi card for it. Should i just get one from OWC or does anyone know of one better or a better option?
View 1 Replies View RelatedI had use my laptop hour ago and suddenly the wifi connection is gone and I try a lot to connect it but the message on the screen is your wifi card is off then I will try to do on it but it wasn't?
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm running a PowerBook G4 15" FW800 (running 10.4.11) which has only ever connected to the internet via an Orinoco WiFi card, and I'm trying to upgrade it to a better card whose signals aren't stopped by a couple inches of walls. So I bought an AirPort Extreme card on Ebay and hooked it up, but it's not working right. I'm hoping for some advice. Note that I don't have an AirPort base station; I have a Linksys router, which the Orinoco card was able to communicate with fine. Anyway, I got the AirPort Extreme card (no software CD included), and hooked it up as demonstrated in this video. My laptop already had some AirPort software on it, which refused to acknowledge the existence of the card.
I then I installed the software available here, which seemed to overwrite the previous set of software; I also ran Software Update. No matter what, the laptop refused to acknowledge the existence of the card. Applications->AirPort Utility, AirPort Admin Utility, and AirPort Disk Utility all turn up blanks. AirPort Utility, for example, just says it's "unable to find any Apple wireless devices". The software that was there before I installed the software linked to above gave a different message. if I do get the laptop to recognize the card, will I even be able to connect to the Linksys without an AirPort base station or something?
I have the aluminum iMac from around 2007 and the WiFi card seems to not be functioning correctly. It seems to time out often and is non-responsive many times. When it is working, it only gets about 1/4 the speed of what my macbook is getting.
View 1 Replies View RelatedI have a 2008 Mac Pro. I am wondering whether its a better idea to go for a WiFi internal card,or is it better to get the airport extreme for wireless internet with router? My knowledge of WiFi/setup is quite limited.
View 4 Replies View RelatedI need a wifi card for my MacBook Pro (preferably N, but G is OK), and an ExpressCard version seems the best choice, however I'm having a really hard time finding one in stores, much less one that I know is Mac compatible. It seems the PC-world's reluctance to move on from PCMCIA is slowing down progress in this area.
There must be an expressCard wifi card out there that works with a MBP running leopard. Does anyone know of one?
I upgraded my internal airport card for wireless N. What's the screen on my mac to check if i'm using 802.11n?
View 1 Replies View RelatedDon't scorch me for asking, because I haven't seen this topic, so I'll ask. Is there anyway to install OS X onto the U100 WITHOUT replacing the wi-fi card built in? Isn't there a driver you can install or something?
View 4 Replies View RelatedSo, I got the Polycarbonate Macbook , Parallels 5, and Windows 7 Home Premium. I installed windows on bootcamp and had parallels use the partition for windows and I got it all working, all the drivers on Windows are great, except the wifi. It's not even saying I've got a wireless card installed, it won't recognize that I have one in my Mac. But when I use parallels and when I boot it as a regular Mac, it works great. I've looked around and haven't found an answer to this? Anyone found a solution or could help?
View 10 Replies View RelatedHow to replace a airport card wifi in a 2007-2008
Info:
MacBook Pro, Mac OS X (10.7.4)
