i have my xbox hooked up to the internet through my airport extreme but recently it stopped recognizing my network and i cant figure out why? All of my other wireless devices work on my airport except my 360 and my imac running windows 7 in bootcamp finds my network but only gives me limited access to the network.
View 1 RepliesI am trying to get onto our home wireless network using a G4 a friend has just given me. It doesn't have an airport facility so my friend has also given me a 802.11g wireless ethernet adapter. I have followed the instructions exactly (accessing the adapters internal configuration and setting it to the wireless networks SSID and channel, then going back into the network settings and re-setting it to "obtain IP address using DHCP') When i restart the computer the network status reads as "built in ethernet is active and has a self-assigned ip address. you may not be able to connect to the internet" (the marker next to it is yellow)
needless to say I cannot connect to the internet.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI upgraded my 802.11b router to an Airport Extreme. My MacPro is connected via LAN. My Macbook has a successful wireless connection to my network.
My problem: I want my Dell on Windows XP to have a wireless connection as well. The PC is still looking for the old router: Dell Trumobile 1180. I am still using the Trumobile 1180 wireless adapter to find my new network.
The wireless connection is excellent; however the Dell is not recognizing my new network.
I've been using a wireless adapter to connect a PC and a laser printer to my Apple based network. The laser printer is always available but the PC only shows up occasionally. I am not making any changes to cause it to show up when it decides to.
View 1 Replies View RelatedMy computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized on list along with all my neighbors.
View 6 Replies View RelatedI have the AirPort Extreme base station 802.11n and was thinking of using it as a way to access a wireless signal since my newly acquired G5 tower doesn't have a wireless card.
Is is possible to use the base station as a wireless access instead of the card?
Caveat: I have a MacBook Pro that I use with a built in wireless card. I get my signal from a wireless signal from my upstairs friend/landlord's network. He uses a Linksys router and modem from the cable company.
Is there a way around buying a wireless card or USB adapter for this G5?
I have a guest account set up on my Airport Extreme. I'm trying to hook up a wireless gaming adapter (xbox) to a Slingbox. It's worked in the past with linksys routers that had no security. When I set up the airport, I set security by default, but I want to remove it from the guest account. I just can't find the way to configure the guest account.
I'm sure is's pretty easy, and just a button I can't find, but if someone could point me in the right direction,
I have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies View RelatedAll of our Macs when first started begin Airport scanning. They log in to an unsecured network from a neighbors home instead of the network we have set as preferred. We then must select manually from the list of available networks which is quite a lot in our community. Why is this and what can we do to stop this?
View 1 Replies View RelatedThis is driving me insane. Just got a new Centrino laptop (obviously with wireless), but it refuses to see the AirPort network. I have reset the base station so there is no encryption of anykind, but still no joy.
Is there anything that needs to be set on the AirPort for this to work?
I just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedIf you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies View RelatedQuestion: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View RelatedI bought the Airport extreme and I can connect from my MBP only when setting the radio mode to:
-802.11n only (5 Ghz)
or
-802.11 (802.11a compatible)
My iBook and Pismo boxes cannot even see the wirless network at all. It is not a closed network and when selecting Other to connect and entering my WPA password I get an error.
I recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies View Relatedim off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies View RelatedI have just recieved a Macbook Pro as a birthday gift! Along with it came Airport Express. We already have an imac that is connected to the internet via an ethernet cable using the broadband provider Virgin Media. Can I create a wireless network with airport express and my broadband or do I need some sort of upgrade or additional hardware?
View 1 Replies View RelatedWe recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies View RelatedLexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
I currently have a DSL internet connection (static IP if that matters), and my iMac is connected to the network via an Airport Extreme, but am switching to Comcast Cable for better speed/price.
I picked up the self-install kit from Comcast yesterday and find the included instructions pretty much worthless.
Due to where cable outlets are located, I hope to install the new cable modem in a different room than my computer. However, will I first need to have the computer hard-wired to the Airport to configure the connection? Or should I be able to configure it wirelessly?
If wirelessly, should it be as easy as turning off the computer and Airport, connecting coax from the wall to cable modem, ethernet cable to the Airport, and then powering everything on? Will the iMac instantly recognize the new connection and walk me through configuration?
I am going from a static IP w/ the DSL to, I assume, a dynamic IP with the Cable. Does this further complicate the install?
I recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.
Info:
iMac, Mac OS X (10.6.8)
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedWhich would be better, a USB wireless adapter or installing an actual wireless card? The computer is a PowerMac G5 1.6GHz and I want to add wireless capability to it. Which card is the best and which USB adapter is the best. We'll be using a Linksys router.
View 4 Replies View RelatedI bought the correct Mini-DVI to VGA adapter and 3.5mm audio cable for my black macbook 2.4GHz in order to project and watch movies, etc. When I hook everything up, the MacBook display settings recognize another display immediately. However the Samsung doesn't see anything connected into the VGA input. I know its not the Samsung HDTV because I had an '08 HP laptop hooked up just fine a few months ago. Should I try different resolutions? I searched the forums for awhile but nata.
View 14 Replies View RelatedWhen I use Thunderbolt to Gigabit Ethernet Adapter in win7, it cannot be recognized by win7, how to fix it?
Info:
MacBook Air, Windows7
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
I am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View Related