Hardware :: Add Another Wireless Router To Existing Airport Extreme Wireless Setup?
Mar 7, 2010
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies
ADVERTISEMENT
Mar 7, 2010
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception.
Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish?
would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it?
update: I am looking at this router...would this accomplish my purpose?
[URL]
View 4 Replies
View Related
Mar 3, 2009
I am sorry, whats the difference?
View 1 Replies
View Related
Jan 11, 2011
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
View 3 Replies
View Related
Jan 1, 2010
I bought an Airport Extreme and am trying to set it up. I installed Airport Utility and have my Airport turned on. The problem I'm having is that Airport Utility is saying it can't find any wireless devices. I have the Airport's Internet WAN port connected to my wall's ethernet port and the Airport's status light is solid green. What I want to do is get a wireless signal from the ethernet port on my wall. Everything in the set up guide and everything I find online has to do with setting the Airport up with a DSL or Cable Modem.
View 3 Replies
View Related
Jul 29, 2009
I want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies
View Related
Dec 11, 2010
i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
View 1 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Apr 21, 2009
What is Airport Extreme? Can I use it in conjunction with my existing modem / router and share it with my internet connection?
View 10 Replies
View Related
Jun 25, 2009
I have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
View 24 Replies
View Related
Dec 14, 2010
I have my PS3, iMac, MBP, and TV connected fine to my wireless network. I tried connecting my PSP to my network, and I get an error, saying something along the lines that the network isnt compatible. Anyone know what type of security setting I need to have, that would be comaptible with my psp?
View 2 Replies
View Related
May 4, 2010
I have an additional question about the Airport Express. I am interested in buying one but don't want to commit until I get a few questions answered.
1. I own a D-link wired router and a d-link wireless router. I have been tempted to buy the express, hook it into my wired router and run wireless off of the apple. I want the express so I can run itunes on my stereo from anywhere in the house.
Would there be any advantages to me using the wireless router in conjunction with the airport express instead?2. I am interested in the DHCP comments from above. If I turn off DHCP on the airport express then any friends who come over to use the wireless internet will need to be personally configured. Could I just assign the Airport Express a static IP address on the wired router, keep a DHCP on on the express for my friends and turn off DHCP on the wired router?
3. I have a PS3. I don't want to slow my gaming speed down. I intend on plugging the PS3 into my existing router (wired or wireless router, I will have it wired though) Will daisy chaining the express off of the router slow down my PS3 connection when other users are not using it?
View 4 Replies
View Related
Feb 17, 2009
I currently have a DSL internet connection (static IP if that matters), and my iMac is connected to the network via an Airport Extreme, but am switching to Comcast Cable for better speed/price.
I picked up the self-install kit from Comcast yesterday and find the included instructions pretty much worthless.
Due to where cable outlets are located, I hope to install the new cable modem in a different room than my computer. However, will I first need to have the computer hard-wired to the Airport to configure the connection? Or should I be able to configure it wirelessly?
If wirelessly, should it be as easy as turning off the computer and Airport, connecting coax from the wall to cable modem, ethernet cable to the Airport, and then powering everything on? Will the iMac instantly recognize the new connection and walk me through configuration?
I am going from a static IP w/ the DSL to, I assume, a dynamic IP with the Cable. Does this further complicate the install?
View 7 Replies
View Related
Jul 6, 2009
I don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
View 2 Replies
View Related
Nov 4, 2010
We've just moved house and signed-up to O2 Broadband. They've supplied a Thomson wireless box that plugs into the phone socket. This box, however, doesn't work with my Apple TV or Airport Extreme/Airport Disk. I've tried to make my Extreme 'extend the network' but it says the network cannot be extended.
How can I ditch this O2 wireless box and get back to my Apple-based network (considering the broadband enters my house through a phone socket rather than a Cat-5 ethernet cable that the Extreme can accept)? I want my AppleTV/Airport disk back as I had in my old house!!
View 1 Replies
View Related
Oct 17, 2010
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
View 6 Replies
View Related
Mar 12, 2009
I live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
View 5 Replies
View Related
Dec 9, 2010
AirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
View 7 Replies
View Related
Apr 26, 2005
My powerBook has no problem connecting, but the Airport Admin utility for Windows XP can't "see" the base station.
Clicking "Start" then "connect to" and then "show all connections" and then the name for my Airport network, a "choose a wireless network" screen comes up, a strength meter (all bars on) displays, and a reminder that a network key is required. Clicking "connect" on this screen shows a "wireless network connection" thingy -- but it never actually connects.
Have a Belkin Wireless G Notebook Network Card in a Toshiba 2430:(URL)
View 14 Replies
View Related
Nov 29, 2006
I no longer have any wireless devices in my house and I'd prefer not to have wireless active. When I go to the AEBS admin utility, the best I can see to do is reduce the signal strength to 10%. Is there a way to shut of wireless altogehter?
View 12 Replies
View Related
Jul 7, 2008
I can't get my Airport Extreme to work w/ any of my PCs (via wireless). I have an Extreme N w/ gigabit and using WPA/WPA2 security. Latest firmware. My MBP works perfectly fine, so does my iPod Touch and even my printer which connects via WiFi also (hp Photosmart D7460).
However none of my PCs can connect, I already tried w/ 2 different Dell laptops a Toshiba laptop and a desktop. All are running XP and have all the updates etc. All connect and work fine to my Linksys WRT54G.
View 10 Replies
View Related
May 18, 2009
First post so bear with me. I use a 1Tb Time Capsule as my wireless router. On the other side of the room I have (wirelessly connected) my PS3, TV, Wii, and a Helios network media server. These are not all wireless N devices.
I also have a previous generation Airport Extreme.
Question. Can I wirelessly connect my Time Capsule to the Airport Extreme (on the same side of the room as the PS3, etc.) and then connect PS3, etc. to the Airport Extreme via the ethernet connections ?
If this is possible would I (as I hope) get better network throughput as the only wireless connection would be at N speeds ?
View 2 Replies
View Related
Aug 2, 2009
Quick question does anyone know how to set the Airport Extreme to wireless N only? I understand it will be wireless N only if I connect to the 5 ghz band. Problem is my Netgear Wireless N Bridge is 2.4 ghz only, and when it connects to the Airport extreme for some reason it only connects at wireless G. I do not see an option in Airport Utility for it to broadcast in Wireless N only. My options are 1) Automatic 2) 802.11a/n-802.11b/g 3) 802.11a-802.11b/g
View 24 Replies
View Related
Aug 6, 2009
Quick question, if I were to get a usb hub to use with an airport extreme would I be able to use both an external hard drive for backup and a printer for wireless printing or will it only let me use one? Also, would I be able to do this with an airport express? From what I see it seems like the express doesn't support hard drives.
View 4 Replies
View Related
Feb 21, 2010
My MacBook Pro's Airport Extreme card usually recognizes ~15 wireless signals (I live in an apartment building), now it picks up none.
If I try to manually access my own wireless network (which works fine for my flatmates' computers), it says "There was an error joining the AirPort network". It doesnt seem to care that the network normally has a password, it just gets an error.
Information:
Max OS X v 10.4.11
AirPort Extreme
firmware version 1.4.4
View 1 Replies
View Related
Jun 4, 2012
I have used my airport extreme for several years. It now will only allow one computer to be connected to wireless at a time. When the new computer signs in shows disconnected. I am able to connect but then the original user is bumped off when they try to switch pages. Talked to provider and everything seems to be OK on their end. Modem works when plugged directly into computer using ethernet cable.
View 2 Replies
View Related
Oct 11, 2006
I have a Linksys wireless router set up (WRT54G) and my PC desktop and laptop connect fine to the internet with wire and wireless. I installed an airport card in our Power Mac G4 but this cannot detect my wireless network. I have it connected now with an ethernet cable running through the kitchen but want to get rid of the cable.
Is there a compatibility issue with airport and a Linksys wireless network? The Mac recognizes the airport card so I hope that means that it is good. (I got it from eBay used) This Mac is the farthest away from the router so I guess my next try is to see if I can move the router a little bit closer.
I am a newbie to wireless so possibly I have a setting wrong. I did tell the router the mac addresses of all of the computers that I want to connect.
Any advice?
View 14 Replies
View Related
Jun 17, 2009
I have a three month old unibody MacBook, and up until yesterday, AirPort seemed to be working just fine, but over the past 15 hours or so, it has lost its wireless connection to the router four times. Two of the times, AirPort reconnected to the router on its own within a matter of seconds. One of the other times, AirPort said that it was enabled but not connected to any networks, and I had to manually reselect my router in the drop-down to reconnect. Now this morning, AirPort lost its connection to the router yet still showed that it was properly connected, but I couldn't access my network or the Internet at all. As soon as I disabled and re-enabled AirPort, everything was fine.
On top of this, I also got my first kernel panic yesterday for seemingly no reason while I was submitting a post to a forum, and I've submitted dozens of posts to that forum before without problem, so the forum can't be to blame. Normally one random disconnect from my router wouldn't be alarming, but four disconnects in the last 15 hours combined with a kernel panic that may or may not be related certainly has me searching for answers. I'm certainly quite confounded, especially considering that I haven't modified anything with my system, nor have I installed any programs in a long time. Should I be alarmed, or could this all be some coincidence?
View 2 Replies
View Related
Jan 5, 2011
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
View 2 Replies
View Related
Oct 3, 2010
Can i have it wired to my computer and wireless at the same time?
If so, what ports to i plug what into?
Is it - modem-wan port on extreme and a cable going wired from the ether port on the extreme to the iMac?
Do i need to do any configuring?
View 5 Replies
View Related
