OS X V10.7 Lion :: Possible To Use Mac's Ethernet Port To Extend Wireless Network To A Non-wireless Device?
May 3, 2012
OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
View 4 Replies
ADVERTISEMENT
Feb 18, 2010
We recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies
View Related
Mar 16, 2010
My BT Router is about, say 150M away, could I get a 100M Ethernet cable, plugged into the Router, going along the walls and then into another Router.
Then, from that Router have another 50M Ethernet cable going directly into my MacBook Pro?
So, like: ROUTER --100M-- 2nd ROUTER --50M-- MacBook Pro
Is this possible, or is 100M the end point? Can't go any further than that?
View 3 Replies
View Related
Nov 9, 2009
If you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies
View Related
Jun 25, 2009
I'm extending my Airport Extreme router with an Airport Express. In the Airport Utility I am given these options:
"Extend a wireless network"
"Participate in a WDS network"
Which one should I choose and why?
View 2 Replies
View Related
Jun 4, 2012
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies
View Related
Aug 15, 2009
I am trying to get onto our home wireless network using a G4 a friend has just given me. It doesn't have an airport facility so my friend has also given me a 802.11g wireless ethernet adapter. I have followed the instructions exactly (accessing the adapters internal configuration and setting it to the wireless networks SSID and channel, then going back into the network settings and re-setting it to "obtain IP address using DHCP') When i restart the computer the network status reads as "built in ethernet is active and has a self-assigned ip address. you may not be able to connect to the internet" (the marker next to it is yellow)
needless to say I cannot connect to the internet.
View 1 Replies
View Related
Mar 9, 2012
my daughters SLEEPING MBP has appeared on my MBP as a shared device. How is this possible if it's sleeping? Perhaps there's a good explanation for this, but I'm concerned about it. She connects via wireless to our home D-link wireless router. Wasn't sure where to ask question on boards..
Info:
Macbook Pro 2.53 Intel i5, Mac OS X (10.6.7)
View 6 Replies
View Related
Jun 30, 2008
I have two G5s, one next to my ethernet/DSL line which plugs in directly for internet, and a second out in the living room where there is no DSL line. However, the house has wireless via an Extreme and two Xpress socket-plug-ins. My mac guy told me that I should be able to hook the G5 in the living room directly into the Xpress next to it via an ethernet cable (the living room G5 does not have a wireless card in it) and the wireless internet should link up via the Xpress to ethernet cable to living room G5. ? He said to make sure I had the ethernet configure box set to "using DHCP" which it is and it should automatically find the right IP address. When I try it, I get nothing though, just a message that there doesn't seem to be a network connection.
View 2 Replies
View Related
Apr 17, 2009
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
View 6 Replies
View Related
Jan 5, 2011
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
View 2 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Oct 2, 2010
What I want to be able to do is plug into the Ethernet ports on this AEBS, and I want that to use wireless to the other wireless router to give me network access. Here is the deal, I have a computer that doesn't have wireless network on it, so it's only Ethernet. I have the AEBS at my desk, and I want to connect the hardwired computer into the AEBS. I want the AEBS to then wirelessly connect that computer that is hard-wired to the network...
View 2 Replies
View Related
Jun 5, 2014
My Macbook Pro has been running into constant problems actually printing to any wireless device.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Jan 25, 2007
I live where there are city-wide WiFi connections. I actually live a block or two from one of the routers. The only problem is that my powerbook 12" has the hardest time picking up a signal, in fact I often have a hard time picking up wireless signals unless I'm right near them.
I realize this is one fault of the 12-banger, but it's almost as if mine sucks more than usual. Anyways, I know there is a way to extend the wireless capabilities. I've seen hacks where an antenna is actually soldered on, which is a route I would rather not take. If I had a windows machine there are several USB adapters to extend the range. Are there any of these that will work with a Mac?
View 2 Replies
View Related
Jul 8, 2009
I am thinking about buying an airport express to extend the wireless coverage in my house.
I have a wireless router, however the signal does not quite reach the other side of the house. At the moment I use some network over mains equipment, like [URL], to connect a desktop up at the other side of the house.
I was wondering if I will be able to connect an airport express up to one of these power line adapters and use it in conjunction with the other wireless.
View 2 Replies
View Related
Jun 7, 2012
10.7.4 frequently freezes with the translucent dialog to power down then power up. This is not isolated to any particular application. Started with the upgrade to 10.7.4. Bluetooth device Bose Wireless Sound-link will not play either but does show connection.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Dec 4, 2008
I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls.
All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors.
So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak.
So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router.
From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
[URL]
Any information would be much appreciated! These networking issues have been giving me months of headache.
Airport Express N version
Connected with 2.4ghz. band to N capable Macs.
View 5 Replies
View Related
May 5, 2010
Can Airport stream itunes and extend my wireless network at the same time?
I have an Airport in my 3rd floor bedroom that I use to feed iTunes to a receiver. When using my iPad (and iPhone) upstairs they are too slow since my wireless router is on the 1st floor. I have an Ethernet connection in my bedroom and could plug the Airport into it. If I hard wire the Airport can I still stream iTunes to my receiver and have it extend my wireless network at the same time?
View 4 Replies
View Related
Apr 15, 2012
My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
View 2 Replies
View Related
May 18, 2012
In OSX 10.6, I can use "internet sharing" to set up a wireless network, connecting my wifi enabled music player (or Apple TV) to my MacBook Pro via wifi without actually connect my Macbook Pro to the Internet. However with OSX 10.7 Lion, "internet sharing" requires actual connection to the Internet. Is there a way to disable Lion's requirement? All I need is to stream the music files in my Mac via wifi to my music player (Logitech Squeeze Box 3), and I don't always have access to the Internet. Of course an Airport Express or any router would solve the problem, but that means one more device.Â
Or, is there any other method to set up a local wireless network without actual Internet access? I tried "Creat Network...." in Airport but that doesn't work with passive music player (or Apple TV). It seems only work with computer to computer networking.
View 5 Replies
View Related
Jun 1, 2012
seriously is apple ever going to get off their collective ***** and fix this?
Info:
Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 29, 2012
I have an older imac running Lion 10.7.4.My router is a Time Capsule running 7.6.1. Yesterday my imac randomly disconnected from wifi and hasn't been able to reconnect since.When I click the wifi icon no networks show up in the list; it simply shows a greyed out "No Network My iphone and laptop each show 5 networks in the area including my own, the imac shows none.I even set my iphone up as a pesonal hotspot to see if the SSID would show up - it I tried putting my network name in manually through "join other network"- nothing. I have reset the computer and router several times each As far as my imac is concerned there are no wireless signals available.
So here's the odd part, I assume the wifi card has just died and haul my imac into the nearby apple authorized repair center. The guy plugs it in and it works no problem - shows the store's network and another one nearby and connects right away. The guy ran one or two quick tests but everything's working fine. I bring it home, the problem comes right back - can't see any of the wireless networks.Works fine through ethernet.
View 2 Replies
View Related
Nov 14, 2008
I want to set up my dual gigabit ethernet as a network team; one for incoming traffic and one for outgoing traffic. (My machine acts as a server, with 2 internal raid striped 1 TB hard drives, and 2 external raid striped 1 TB hard drives (time machine for the computer); and 2 10,000 RPM raptor drives striped as my boot drive. Anyways, enough about that.) How do I do this? I currently have both ports connected to my Airport extreme wireless N with Gigabit, is there a way to do what I want to do with these products, or is there something else that I need to get as well?
View 6 Replies
View Related
Jun 2, 2012
First of all here's my setup: 30d/4u Charter internet coming in through my Linksys modem, from there to port 1 of my 2006 Intel Xserve running NAT and DHCP, out from port 2 of the Xserve into my AirPort Extreme running in Bridge Mode, and then out to my other devices.Â
My AirPort setup is as follows: Internet tab-DHCP, address set by Xserve; Wireless tab-Create a wireless network, WPA/WPA 2 Personal; Wireless Options...-5 GHz network name is not checked, Radio mode is set to 802.11a/n-802.11b/g/n (Automatic), both 2.4 and 5 GHz channels are set to Automatic; Network tab-Off (Bridge Mode).Â
I am transferring 100+ GB of data across the network to my Xserve, but it is only Xferring at 5.5 MB/s, or around 44 Mbps, which isn't even at wireless-g speeds. My iMac is the Mid 2010 27" BTO w/ 2.93 i7 and 8 GB of RAM. It is also wireless-n compatible.The Xserve is wired and they have had gigabit NICs since the G5s.Â
Things I've tried: In Wireless Options... I tried turning Radio Mode to 802.11a/n-802.11b/g and leaving 5 GHz network name unchecked, but the speeds were down in the 2 MB/s range. Again in Wireless Options... I checked the box for 5 GHz network name, and left Radio Mode in Auto, joined the 5 GHz network on my iMac, tried again, but again only 2 MB/s or less. In Wireless Options... again, I checked the 5 GHz network name box, and set Radio Mode to a/n-b/g, but ocne again, it ran at 2 MB/s or less. The AirPort Extreme is model A1354, which is obviously 802.11n compatible, and the iMac is also 802.11n compatible. Â
View 2 Replies
View Related
Dec 11, 2009
Can my AirPort Extreme work via a Cat5 ethernet port within my network? I ask because we've had no luck doing this where as our older Airport Express works just fine this way. Thoughts? We upgraded to the Extreme to extend the signal (and have 2 antennas) and trying to avoid hooking it up to the cable modem box which is even further away than where the Airport Express was located.
View 3 Replies
View Related
Oct 1, 2009
I'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies
View Related
Mar 10, 2012
I can't connect to ethernet or wireless. My wireless and ethernet works perfectly on other devices except my macbookpro.
When I plug in the ethernet cable and connect to my wireless, it says that i am connected, but internet doesn't work.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 14, 2012
I have a macbook pro (Nov 2011) and just purchased a Time Capsule (4th Generation) and rigged this up successfully. I have nearly 450GB to backup and I've noticed whilst in backup mode, my browser is hanging occassionally. I'm looking at the network in/out speeds and if I'm reading correctly, I'm only getting 703 kb/sec when I'm wired, and slightly more (900 kb/sec wireless). Backing up is estimated at 10 days wired, and 8 wireless. This seems mighty slow.   Â
A few questions.Â
a) Shouldnt wired be significantly faster.   Do I need any special cables I should be aware of?
b) what speeds should I be seeing for both wired and wireless.
Info:
Time Capsule 802.11n (4th Gen), Mac OS X (10.7.4)
View 8 Replies
View Related
Apr 22, 2012
I have an iPad 2, iPad 3, and a iPhone 4S that I sync with my Mac iTunes. All have the latest software. In the past, a couple of days ago, and for months before, all three devices showed up under Devices in iTunes even though none of them were physically connected to my Mac and were often other places in the house. Then, when I downloaded updated apps I could manually sync each of my devices via iTunes. That was great. Now, all of a sudden (although I did try iCloud backup and then stopped it and reverted to NO iCloud backup), my iPad 3 ONLY shows up in Devices when it is physically connected to my Mac. And when I unhook the cable, it disappears from Devices. I've restarted iTunes and the iPad without any change in behavior. All of the General preferences and Settings are the same for all three devices (the iPad 3 was built by restoring from the iPad 2 backup). It seems I need a "refresh" button somewhere to force iTunes to find my wireless iPad 3. how to force iTunes to recognize a non-cable-connected device (like it did before)?Â
View 2 Replies
View Related
