This is driving me insane. Just got a new Centrino laptop (obviously with wireless), but it refuses to see the AirPort network. I have reset the base station so there is no encryption of anykind, but still no joy.
Is there anything that needs to be set on the AirPort for this to work?
I just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedI bought the Airport extreme and I can connect from my MBP only when setting the radio mode to:
-802.11n only (5 Ghz)
or
-802.11 (802.11a compatible)
My iBook and Pismo boxes cannot even see the wirless network at all. It is not a closed network and when selecting Other to connect and entering my WPA password I get an error.
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Here is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
We've just moved house and signed-up to O2 Broadband. They've supplied a Thomson wireless box that plugs into the phone socket. This box, however, doesn't work with my Apple TV or Airport Extreme/Airport Disk. I've tried to make my Extreme 'extend the network' but it says the network cannot be extended.
How can I ditch this O2 wireless box and get back to my Apple-based network (considering the broadband enters my house through a phone socket rather than a Cat-5 ethernet cable that the Extreme can accept)? I want my AppleTV/Airport disk back as I had in my old house!!
I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies View RelatedI recently got a PowerPC G4 from a family member and reinstalled Mac OS X 10.5. I did this without the Airport Extreme card installed. After installation I put the card in, and after booting up I thought the card would be recognized. I was wrong. Any suggestions besides that the card might be bad, that I can do to fix this? The card works on other machines.
View 1 Replies View RelatedAirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
My powerBook has no problem connecting, but the Airport Admin utility for Windows XP can't "see" the base station.
Clicking "Start" then "connect to" and then "show all connections" and then the name for my Airport network, a "choose a wireless network" screen comes up, a strength meter (all bars on) displays, and a reminder that a network key is required. Clicking "connect" on this screen shows a "wireless network connection" thingy -- but it never actually connects.
Have a Belkin Wireless G Notebook Network Card in a Toshiba 2430:(URL)
I no longer have any wireless devices in my house and I'd prefer not to have wireless active. When I go to the AEBS admin utility, the best I can see to do is reduce the signal strength to 10%. Is there a way to shut of wireless altogehter?
View 12 Replies View RelatedI can't get my Airport Extreme to work w/ any of my PCs (via wireless). I have an Extreme N w/ gigabit and using WPA/WPA2 security. Latest firmware. My MBP works perfectly fine, so does my iPod Touch and even my printer which connects via WiFi also (hp Photosmart D7460).
However none of my PCs can connect, I already tried w/ 2 different Dell laptops a Toshiba laptop and a desktop. All are running XP and have all the updates etc. All connect and work fine to my Linksys WRT54G.
I am sorry, whats the difference?
View 1 Replies View RelatedFirst post so bear with me. I use a 1Tb Time Capsule as my wireless router. On the other side of the room I have (wirelessly connected) my PS3, TV, Wii, and a Helios network media server. These are not all wireless N devices.
I also have a previous generation Airport Extreme.
Question. Can I wirelessly connect my Time Capsule to the Airport Extreme (on the same side of the room as the PS3, etc.) and then connect PS3, etc. to the Airport Extreme via the ethernet connections ?
If this is possible would I (as I hope) get better network throughput as the only wireless connection would be at N speeds ?
Quick question does anyone know how to set the Airport Extreme to wireless N only? I understand it will be wireless N only if I connect to the 5 ghz band. Problem is my Netgear Wireless N Bridge is 2.4 ghz only, and when it connects to the Airport extreme for some reason it only connects at wireless G. I do not see an option in Airport Utility for it to broadcast in Wireless N only. My options are 1) Automatic 2) 802.11a/n-802.11b/g 3) 802.11a-802.11b/g
View 24 Replies View RelatedQuick question, if I were to get a usb hub to use with an airport extreme would I be able to use both an external hard drive for backup and a printer for wireless printing or will it only let me use one? Also, would I be able to do this with an airport express? From what I see it seems like the express doesn't support hard drives.
View 4 Replies View RelatedMy MacBook Pro's Airport Extreme card usually recognizes ~15 wireless signals (I live in an apartment building), now it picks up none.
If I try to manually access my own wireless network (which works fine for my flatmates' computers), it says "There was an error joining the AirPort network". It doesnt seem to care that the network normally has a password, it just gets an error.
Information:
Max OS X v 10.4.11
AirPort Extreme
firmware version 1.4.4
I have used my airport extreme for several years. It now will only allow one computer to be connected to wireless at a time. When the new computer signs in shows disconnected. I am able to connect but then the original user is bumped off when they try to switch pages. Talked to provider and everything seems to be OK on their end. Modem works when plugged directly into computer using ethernet cable.
View 2 Replies View RelatedI recently replaced my aging linksys G router with an Airport extreme. I have an HP 2605dn printer connected to it via ethernet. When I set this up with the old router everything worked great, printer showed up in OSX and added with a couple of clicks. Now that I have moved to the airport I cannot find the printer at all from OSX on either my MacBook Pro with 10.6 or my Powerbook with 10.5. However all of the Windows 7 machines I have in the house see it and print fine. I feel like I'm missing something very simple and help would be amazing.
View 6 Replies View RelatedMy home network is using a Netgear wireless router, which is just used for sharing the internet. I was wondering if Airport Extremes could be placed in another room to connect to a USB hard drive and share it, as well as extending the internet from my Netgear wireless?
View 12 Replies View RelatedI already have an airport extreme to go along with my new alum macbook. But my wife's pc laptop and my iphone are only G wireless and not N so when they are in use it slows the network way down. If I bought an airport express could I link them together on the same network (to share printer and HD on the extreme) and have one handle the N traffic and one handle the G traffic?
View 8 Replies View RelatedMy university says the ethernet network that they supply in uni halls of accomodation does not allow wireless devices, surely they can't make it so that you cant use an airport extreme or some other device to make the wired network in to a wireless one. The connection is through a proxy and uses PEAP. They also use 802.11X authentication. How can i use my airport extreme in my room so i can use my laptop wirelessly?
View 2 Replies View RelatedI just bought an Airport Extreme.I have two desktops (wired) and a laptop (wireless).They all can connect to the internet fine (wired and wirelessly respectively). But there is no network (file sharing, itunes sharing, etc.)
I was under the impression that the difference between the AP extreme and AP express was that the extreme is also a router (capable of creating a network).
Can I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G. My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds? Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I am in need of some help with my AEBS v2. I just bought it today and a little bit confused coming from a Linksys.I have an HP Photosmart C4480 and setup the printing and it works with my MBP but when I try to add it for my sister's Windows XP laptop it can't find the printer whatsoever even with bonjour installed and all. I'm in need of your assistance to get it working.
View 2 Replies View RelatedI want to test the range of an AE base station at a theatre that I'm installing wi-fi for. I'm wi-fi challenged, so the AE was my choice when setting up my home network. I may need to extend the theatre's network with an Airport Express, but want to test the range of it with my AE base station from home. (Got that?) [oh, and it's a theatre I work for and am installing all sorts of fun goodies. I'm good with stuff but wifi makes me corky thatcher. -ed]Since I'm wi-fi challenged, will it totally mess up my settings on my home network if I try to use it at the theatre? If it will, then I'll just buy a fresh one for the theatre and see after that if I need an express. I'd just like to run to the apple store once, not twice
View 5 Replies View Related
