OS X :: Extended Wireless Network - How To Know Which Airport On
Dec 23, 2009I have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies
ADVERTISEMENT
Hardware :: Extended Wireless Network - Multiple Airport Express Wireless Setup
May 14, 2009I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedHardware :: Making Extended Airport Network A Bit More Reliable
Jun 12, 2009Right now I have a 500gb Time Capsule (single band) in one room being extended by an Airport Extreme (N-mode, single band) in another. If you were picturing a number line, the TC would be at 0, the AE would be at 5, and I sit at 10.
I always have a full signal to the AE, but every now and then, my internet stops connecting. So in other words, the actual wifi signal itself is fine, it's the internet.
So I keep my Airport Utility open to troubleshoot this, and I notice that when internet goes out, Airport Utility no longer shows the TC on the lefthand side where it lists the devices, leading me to believe that for a moment, the two lose connection of each other.
ITunes :: AirPlay Not Working On AirPort Express N In Extended Network
Apr 5, 2012I have a setup as in the diagram below. Internet Router connected to my Airport Express N which creates a N-class network. Then I have an Time Capsule in another room that extends this network. My iMac is connected to this Time Capsule using Ethernet (WiFi is turned off completely).
iTunes is 10.6.1 (7)
Airport Express and Time Capsule have the latest firmware (v7.6.1)
Internet, sharing and other functions are working fine, just Airplay from the iMac doesn't work anymore to the Airport Express. I've tried lots of solutions, and this just seems to be broken. I've submitted to Apple feedback as well explaining the situation and that this doesn't work. If I add/remove a password or enable/disable airplay on the Express, it does reflect in iTunes. It also shows that the Airplay is locked/unlocked (see image) and also shows it as a visible audio destination.
But when you activate it from iTunes, it doesn't ask for any password (if enabled), but it just displays the "connecting" dialog for about 1 minute and then closes the window without any error and just does nothing. It's like iTunes cannot communicate to the Airport Express, although at the same time I can connect to it's internal configuration (edit) and also connect to the internet, my router's config using a browser, etc. without any problems. Also, if I'm using my iPad and iPhone, I can easily use the Airport Express from those devices, but NOT from the iMac.
Info:
iMac, Mac OS X (10.7.2)
OS X :: AirPort Not Pickup Preferred Wireless Network
May 25, 2009All of our Macs when first started begin Airport scanning. They log in to an unsecured network from a neighbors home instead of the network we have set as preferred. We then must select manually from the list of available networks which is quite a lot in our community. Why is this and what can we do to stop this?
View 1 Replies View RelatedHardware :: Windows XP SP2 And AirPort Extreme Wireless Network?
Jan 4, 2006This is driving me insane. Just got a new Centrino laptop (obviously with wireless), but it refuses to see the AirPort network. I have reset the base station so there is no encryption of anykind, but still no joy.
Is there anything that needs to be set on the AirPort for this to work?
MacBook Pro :: Cannot Get Wireless Network To Popup On AirPort Extreme
Jul 22, 2009I just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedHardware :: Can Extend A Wireless Network With Two AirPort Extremes
Nov 9, 2009If you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies View RelatedHardware :: 360 Wireless Adapter Won't Recognize Airport Network?
Nov 15, 2009i have my xbox hooked up to the internet through my airport extreme but recently it stopped recognizing my network and i cant figure out why? All of my other wireless devices work on my airport except my 360 and my imac running windows 7 in bootcamp finds my network but only gives me limited access to the network.
View 1 Replies View RelatedHardware :: Wireless Printer Can Be Connected To Airport Express Network?
Sep 12, 2010Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View RelatedPowerPC :: AirPort Extreme - IBook And Pismo Cannot See Wireless Network
Feb 20, 2007I bought the Airport extreme and I can connect from my MBP only when setting the radio mode to:
-802.11n only (5 Ghz)
or
-802.11 (802.11a compatible)
My iBook and Pismo boxes cannot even see the wirless network at all. It is not a closed network and when selecting Other to connect and entering my WPA password I get an error.
Hardware :: Extending Airport Wireless Network Using 2 Different Base Stations
Apr 9, 2009I recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies View RelatedHardware :: Setup Wireless Network In Room With Airport Express
Aug 17, 2009im off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies View RelatedOS X :: How To Create A Wireless Network With Airport Express And Virgin Media Broadband
Feb 25, 2009I have just recieved a Macbook Pro as a birthday gift! Along with it came Airport Express. We already have an imac that is connected to the internet via an ethernet cable using the broadband provider Virgin Media. Can I create a wireless network with airport express and my broadband or do I need some sort of upgrade or additional hardware?
View 1 Replies View RelatedHardware :: Joining Two AirPort Extremes By Ethernet To Extend A Wireless Network?
Feb 18, 2010We recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies View RelatedOS X V10.6 Snow Leopard :: Connect A Wireless-capable Printer To Airport Network?
Apr 8, 2012Lexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
Hardware :: Converting Existing DSL-based Airport Wireless Network To Cable Modem?
Feb 17, 2009I currently have a DSL internet connection (static IP if that matters), and my iMac is connected to the network via an Airport Extreme, but am switching to Comcast Cable for better speed/price.
I picked up the self-install kit from Comcast yesterday and find the included instructions pretty much worthless.
Due to where cable outlets are located, I hope to install the new cable modem in a different room than my computer. However, will I first need to have the computer hard-wired to the Airport to configure the connection? Or should I be able to configure it wirelessly?
If wirelessly, should it be as easy as turning off the computer and Airport, connecting coax from the wall to cable modem, ethernet cable to the Airport, and then powering everything on? Will the iMac instantly recognize the new connection and walk me through configuration?
I am going from a static IP w/ the DSL to, I assume, a dynamic IP with the Cable. Does this further complicate the install?
OS X V10.6 Snow Leopard :: 2006 IMac Won't Stay Connected Via Airport To Wireless Network
Apr 23, 2012I recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.Â
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.Â
Info:
iMac, Mac OS X (10.6.8)
OS X V10.7 Lion :: Wireless Network Connects To The Wrong Wireless Network?
Jun 4, 2012When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedIntel Mac :: Wireless Keypad Is The Extended Type But The Numeric Keys Do Not Work?
Mar 18, 2012My iMac4.1 says the keyboard software is up to date, but the numeric keypad on the right does not work for numbers. The other non-numeric keys are OK.
Info:
iMac, Mac OS X (10.6.8), Wireless extended keyboard
OS X V10.7 Lion :: Reformat MacBook Air From Mac Extended To Mac Extended (Journaled) So It Will Boot / Reinstall It?
Jul 5, 2012How do I reformat a MacBook Air from Mac OS Extended to Mac OS Extended (Journaled) so it will boot / reinstall Lion?Â
Info:
MacBook Pro, Mac OS X (10.7.4)
Hardware :: Time Capsule Join Wireless Network/Will All Traffic Go Mac Wireless Router
Jan 5, 2011I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
OS X V10.7 Lion :: Possible To Use Mac's Ethernet Port To Extend Wireless Network To A Non-wireless Device?
May 3, 2012OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
OS X :: Auto-mount A Network Drive After Connecting To A Wireless Network?
Sep 22, 2010I am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
Hardware :: Add Another Wireless Router To Existing Airport Extreme Wireless Setup?
Mar 7, 2010I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View RelatedOS X :: OS Extended Versus OS Extended (Journaled)
Aug 6, 2007What's the difference between Mac OS Extended and Mac OS Extended (Journaled)? Which one is better to format an external hdd that's going to be use mainly as a scratch disk?
View 9 Replies View RelatedHardware :: Airport Extreme Not Forwarding Airdisk To Connected Airport Express Network?
Apr 25, 2010I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
OS X :: AirPort Utility - Unable To Find Any AirPort Wireless Devices?
Aug 9, 2010When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
View 4 Replies View RelatedOS X :: Slow Network - Airport Express To Extend The Network
Apr 21, 2010I have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
OS X :: Extend A Wireless Network/Participate In A WDS Network?
Jun 25, 2009I'm extending my Airport Extreme router with an Airport Express. In the Airport Utility I am given these options:
"Extend a wireless network"
"Participate in a WDS network"
Which one should I choose and why?
