All of our Macs when first started begin Airport scanning. They log in to an unsecured network from a neighbors home instead of the network we have set as preferred. We then must select manually from the list of available networks which is quite a lot in our community. Why is this and what can we do to stop this?
View 1 RepliesI just got my iBook Clamshell Blueberry from a seller. It appears to have Airport, but it has 9.2 OS and I'm not sure how to get it to pickup my wireless network. Any ideas? Other then that its in Great shape. No pixels out and no cracks. I want to up the ram and hardrive and then get a dvd drive to sub out for the cd drive.
View 10 Replies View RelatedI have a macbook air, but this seems to apply to any mac's with airport. I connect once to our corporate wireless network, I type in the password and it connects. On occasions, when I start up the computer, it doesn't connect and a window pops up with my network listed but it says "none of your preferred networks are available". When I first connect I do check off remember this network. So why isn't it remembering it?
When I go into system preference and click on network, select airport and click on advanced, that network does appear under the preferred networks. Does anyone know why its not letting me automatically connect the next time? Sometimes its ok, sometimes it doesn't even know I connected to this network before.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies View RelatedThis is driving me insane. Just got a new Centrino laptop (obviously with wireless), but it refuses to see the AirPort network. I have reset the base station so there is no encryption of anykind, but still no joy.
Is there anything that needs to be set on the AirPort for this to work?
I just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedIf you have a wireless network using an AirPort Extreme, can you extend the range by using an other AirPort Extreme with? Or you can only do that with an AirPort Express?
View 1 Replies View Relatedi have my xbox hooked up to the internet through my airport extreme but recently it stopped recognizing my network and i cant figure out why? All of my other wireless devices work on my airport except my 360 and my imac running windows 7 in bootcamp finds my network but only gives me limited access to the network.
View 1 Replies View RelatedQuestion: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View RelatedI bought the Airport extreme and I can connect from my MBP only when setting the radio mode to:
-802.11n only (5 Ghz)
or
-802.11 (802.11a compatible)
My iBook and Pismo boxes cannot even see the wirless network at all. It is not a closed network and when selecting Other to connect and entering my WPA password I get an error.
I recently upgraded my Airport Extreme form the old "UFO looking" Airport to a the new Airport Extreme N and am having trouble extending the network using the older airport as a remote in WDS. I have followed both of the following articles without any success.[URL:...] I followed the 2nd doco (ap2124) up to point 6 and I followed the 1st doco (ap2045) from the start and applied the changes, but my older (ufo looking) airport extreme don't seem to connect to the newer Airport Extreme N. I contacted Apple support and after checking with the product specialist, they advised me that I couldn't mix the 2 devices and I would have to buy the Airport Express N and extend my network using the Express. my question is, has anyone extended their network by using 2 different Airport base stations?
View 2 Replies View Relatedim off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies View RelatedI have just recieved a Macbook Pro as a birthday gift! Along with it came Airport Express. We already have an imac that is connected to the internet via an ethernet cable using the broadband provider Virgin Media. Can I create a wireless network with airport express and my broadband or do I need some sort of upgrade or additional hardware?
View 1 Replies View RelatedWe recently bought a new AirPort Extreme. As we already have one, we want to hook them up by ethernet, and the new one should extend the wireless network created by the old one.
View 1 Replies View RelatedLexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
In my house, there are several available WiFi networks, including my airport. I tried joining one of the others once when mine was down, and now my computer regularly attempts to join that one when ever it wakes up. Can I make it forget to join that network, or make mine its first preference?
View 6 Replies View RelatedI currently have a DSL internet connection (static IP if that matters), and my iMac is connected to the network via an Airport Extreme, but am switching to Comcast Cable for better speed/price.
I picked up the self-install kit from Comcast yesterday and find the included instructions pretty much worthless.
Due to where cable outlets are located, I hope to install the new cable modem in a different room than my computer. However, will I first need to have the computer hard-wired to the Airport to configure the connection? Or should I be able to configure it wirelessly?
If wirelessly, should it be as easy as turning off the computer and Airport, connecting coax from the wall to cable modem, ethernet cable to the Airport, and then powering everything on? Will the iMac instantly recognize the new connection and walk me through configuration?
I am going from a static IP w/ the DSL to, I assume, a dynamic IP with the Cable. Does this further complicate the install?
I recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.
Info:
iMac, Mac OS X (10.6.8)
How can I change the preferred order of networks on my MacBook Pro? There used to be one network at my office. Now there is a second higher speed wifi network also present which I would prefer to connect to, but the Macbook connects to the older one unless manually changed.
Info:
MacBook Pro, Mac OS X (10.6.8)
It will connect to it fine manually, but when it open it up it tells me that none of my preferred networks are available. I've modified my list of preferred networks, still doesn't work.
Info:
MacBook Pro, Mac OS X (10.7.4)
Even other networks can not be shown after I restart my mac ?
View 1 Replies View RelatedI have Mac Mini (mid 2011) and I didnt upgarde to recent Lion update, so am still on 10.7.2, but suddnelly everytime i restart my mini or wakes up from sleep mode, I have to re-choose my wi-fi network from a network list!!
I don't know how I can let my mini connect automatically to my wi-fi network?
Info:Mac mini, Mac OS X (10.7.2)
Several times when I turn on my laptop the date regresses to 2003 or around there. When this happens the preferred network is no longer saved and I must re-enter the information. The printer that I got specifically to work with my laptop can no longer scan documents to my Mac and the settings were never changed, I'm really at a loss. My Mac is also running really slow.
Info:
MacBook Pro, Mac OS X (10.6.8)
After returning from sleep mode my prefered network won't automatically connect. I checked the settings and its set to automatically connect to my network. I have to turn of the wireless and then turn it back on or select my network before it will connect.
Info:
iMac (21.5-inch Mid 2010), iOS 5.0.1, 10.7.3
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedMy iMac displays "Preferd network not found" and a list of available networks to choose from. But my network IS on the list. Why does iMac not connect automatically ?
View 5 Replies View RelatedI have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
I am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
