When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 RepliesOK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
I'm extending my Airport Extreme router with an Airport Express. In the Airport Utility I am given these options:
"Extend a wireless network"
"Participate in a WDS network"
Which one should I choose and why?
My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
In OSX 10.6, I can use "internet sharing" to set up a wireless network, connecting my wifi enabled music player (or Apple TV) to my MacBook Pro via wifi without actually connect my Macbook Pro to the Internet. However with OSX 10.7 Lion, "internet sharing" requires actual connection to the Internet. Is there a way to disable Lion's requirement? All I need is to stream the music files in my Mac via wifi to my music player (Logitech Squeeze Box 3), and I don't always have access to the Internet. Of course an Airport Express or any router would solve the problem, but that means one more device.Â
Or, is there any other method to set up a local wireless network without actual Internet access? I tried "Creat Network...." in Airport but that doesn't work with passive music player (or Apple TV). It seems only work with computer to computer networking.
seriously is apple ever going to get off their collective ***** and fix this?
Info:
Mac OS X (10.7.4)
I have an older imac running Lion 10.7.4.My router is a Time Capsule running 7.6.1. Yesterday my imac randomly disconnected from wifi and hasn't been able to reconnect since.When I click the wifi icon no networks show up in the list; it simply shows a greyed out "No Network My iphone and laptop each show 5 networks in the area including my own, the imac shows none.I even set my iphone up as a pesonal hotspot to see if the SSID would show up - it I tried putting my network name in manually through "join other network"- nothing. I have reset the computer and router several times each As far as my imac is concerned there are no wireless signals available.
So here's the odd part, I assume the wifi card has just died and haul my imac into the nearby apple authorized repair center. The guy plugs it in and it works no problem - shows the store's network and another one nearby and connects right away. The guy ran one or two quick tests but everything's working fine. I bring it home, the problem comes right back - can't see any of the wireless networks.Works fine through ethernet.
First of all here's my setup: 30d/4u Charter internet coming in through my Linksys modem, from there to port 1 of my 2006 Intel Xserve running NAT and DHCP, out from port 2 of the Xserve into my AirPort Extreme running in Bridge Mode, and then out to my other devices.Â
My AirPort setup is as follows: Internet tab-DHCP, address set by Xserve; Wireless tab-Create a wireless network, WPA/WPA 2 Personal; Wireless Options...-5 GHz network name is not checked, Radio mode is set to 802.11a/n-802.11b/g/n (Automatic), both 2.4 and 5 GHz channels are set to Automatic; Network tab-Off (Bridge Mode).Â
I am transferring 100+ GB of data across the network to my Xserve, but it is only Xferring at 5.5 MB/s, or around 44 Mbps, which isn't even at wireless-g speeds. My iMac is the Mid 2010 27" BTO w/ 2.93 i7 and 8 GB of RAM. It is also wireless-n compatible.The Xserve is wired and they have had gigabit NICs since the G5s.Â
Things I've tried: In Wireless Options... I tried turning Radio Mode to 802.11a/n-802.11b/g and leaving 5 GHz network name unchecked, but the speeds were down in the 2 MB/s range. Again in Wireless Options... I checked the box for 5 GHz network name, and left Radio Mode in Auto, joined the 5 GHz network on my iMac, tried again, but again only 2 MB/s or less. In Wireless Options... again, I checked the 5 GHz network name box, and set Radio Mode to a/n-b/g, but ocne again, it ran at 2 MB/s or less. The AirPort Extreme is model A1354, which is obviously 802.11n compatible, and the iMac is also 802.11n compatible. Â
I bought my new (and first) unibody macbook 2 weeks ago. I'm loving everything about it
I was just wondering if the following is possible.
So I have a new macbook and a personal PC, both connected to a wireless internet network (with a D-Link Router).
There's a printer connected to my PC and I would like to know if it was possible to acces my PC through the internet and print files on it from my Macbook.
I hope I explained it good enough?
I inadvertently created a "Guest" wireless network account using my full name which is currently being broadcasted in my neighborhood. Of course I am concerned about having my full name out in public. I have my home personal network and would like to create a "Guest" network (minus my full name). Can someone walk me through the steps to get rid of my mistake?
View 3 Replies View RelatedI have a white MacBook running OSX 10.5.6, and I have trouble connecting to wireless networks that require you to login.Example: I'm in my school's library, I open up my macbook, connect to the wireless network, open up firefox, attempt to go to a web page, and get a message that says that I am offline instead of being directed to the wireless log-in page. This happens at every wireless location that requires you to login/buy a pass to access the internet. The only work around that I've found is to reboot my computer. I think the issue involves my computer retrieving the wireless network's DNS address. Is there a way I can force my computer to pull down the DNS address? I've tried manually entering the school's DNS IPs, but it doesn't seem to work all the time.
View 4 Replies View RelatedI am using a dsl wireless router to create a home network (damned if im gonna pay 2 bills for a japanese cable router) every time I connect, the internet service provider intercepts my link and forces me to log in, when I try to log in on another computer it does the same thing, but I can only log in one computer at a time on the same user id.
Is there a way to split the connection from my wireless router to each mac without the service provider recognizing it is two separate machines? This is legit, if I shell out the 2 bills for their wireless router I can log two machines in, so its not like im stealing service here, just trying to get my wife and I on at the same time without having to buy new hardware that is redundant.
I currently use a time capsule for wifi at home. It's located in my basement. The problem is the signal strength on the second floor isn't the greatest. I was wondering if I could extend the network by running a cable from the time capsule to the second floor and plug it into an airport express. Is this setup referred to as a "bridge"?
View 1 Replies View RelatedBack at my parents house, my dad had an older Linksys Wireless G router where I would be able to see all of the other WinXP computers on the network along with their associated shared folders/drives/peripherals in the 'shared' tab on Finder's left side navigation pane. Since it's old, and my father doesn't fix what isn't broken, he doesn't remember how he set that up.
I'm looking to replicate this with my WinXP desktop and early 2008 MBP. I have a WRT310N Linksys router and WinXP SP 3. I've tried nearly everything, but the ease and simplicity of my dad's set up required nothing on the Mac side, whereas I'm seeing a lot of network configuration for most other methods.
On a side note, I'm hoping this will help me wirelessly connect an external HDD so that I can back up my MBP without connecting my USB Exteranal HDD to it ever night.
I have an airport extreme and created a wpa2 protected network. However, when I see my download traffic with my provider, I'm under the impression that it rises way too fast compared too what I do on the net... So I'm wondering if there's a way or a tool that allows me to see how many pc's have logged into my network. Surely my airport must store this data somewhere?
View 11 Replies View RelatedI upgraded my 802.11b router to an Airport Extreme. My MacPro is connected via LAN. My Macbook has a successful wireless connection to my network.
My problem: I want my Dell on Windows XP to have a wireless connection as well. The PC is still looking for the old router: Dell Trumobile 1180. I am still using the Trumobile 1180 wireless adapter to find my new network.
The wireless connection is excellent; however the Dell is not recognizing my new network.
My MacBook Pro doesn't get receive wifi very well in my office, but my partners PC laptop does. I know there is a way to set up internet sharing so that the PC shares its internet connection to my laptop, but I do not know how to do this.
I'm running Mac OS 10.5.8, he has XP.
I got fiber optic internet installed, and setup a pppoe wired connection using the username and password given to my by my ISP, and it works beautifully. But I can't get the wireless for it setup. When I go to Airport utility (my router is a Time Capsule), I tell it to set up a new connection, give it a name and password, tell it to connect using pppoe and enter in the same username and password as given by my ISP for that, and finish and everything seems to go ok, and it shows that i connect to the network, but pages wont load...
View 1 Replies View RelatedWhen I try to connect to a wireless network. It says there is no IP address? I know nothing about computers. The mac shoppe told me I needed to erase everything and re-install my software. I did this, and it still doesn't work. I'm very frustrated because I lost everything when I did this!
When I connect directly to the modem, it works fine.
My 2009 uMBP 10.6.6 is unable to join an open network, while my Win 7 Boot Camp partition, iPod Touch, and separate Win XP machine, all are able to. It can find the network, but when I try to join it, it immediately says "connection failed."
View 3 Replies View RelatedI took it out of the plugged it in. Turned it on. The airport refuses to connect to my wireless network. The exact same network my G5 connects to fine!
View 14 Replies View RelatedI am recently bought my mother a macbook and everything has been going great except for one thing. Everytime we turn it on I notice that we are on another wireless network that isn't hers. I looked in the Internet Network System Preferences but I couldn't find anything. How to change the default wireless network in Mac OS X.
View 2 Replies View RelatedI'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
This is probably very basic but I don't know how to do it.I have an iMac (2007) running Leopard. I have an iBook (2004) running Tiger. They both share my home wireless network.
How can I best share documents between them? Eg how can I browse the hard drive of each machine from the other- ideally without entering passwords etc every time?
Additionally, the iMac is connected to the printer (because it is also a scanner); can the iBook share the printer too?
My iBook suddenly just stopped connection to my time capsules network. Everytime I can on my network to join it, it asks for my password which I then put in, then it says connection timeout. I have restarted both the laptop and time capsule but it still won't connect. I can get on the network perfectly fine on my iPhone but not laptop.
View 2 Replies View RelatedI have a macbook that is running leopard on it and it is connected to my Airport Extreme and I have a Windows XP desktop that is connected to my Airport Extreme Via ethernet and i would like to be able to look and interact with the windows XP computer through my Macbook. (Screen Sharing)
View 1 Replies View RelatedI'm just wondering, if I am streaming media eg. Movies, Music, Pictures, over my wireless network would this contribute to my monthly download quota?
View 5 Replies View Related