How do I get my imac to recognized the 4G memory upgrade I just inserted (from 2G factory)? It isn't running faster and the "about this mac" still says 2G.
Info:
iMac, OS X Mavericks (10.9.4), Vintage 2008 imac
how to obtain a bigger memory for my imac so that I can upgrade to OSX LIon and then to icloud? My imac currently has 1 Gb memory and I need 2 Gb apparently. Apple can no longer supply a 2 Gb memory. I will need to knowe hwre to buy a suitable memory and how to change it.
finally, I decided to get a new 21.5 iMac.and I want to upgrade it to a 2GBx4 memory but i don't know what kind of memory i need.How about the "Kingston 2GB 1333MHz DDR3 Non-ECC CL9 SODIMM KVR1333D3S9/2G"?
I have a mid 07 iMac that I just upgraded the memory in and now it wont reboot. I had two 1 gig and switched to two 2 gigs. I can replace one of the 2 gigs with one of the original 1 gigs and it will start and shows in "about this mac" that I have 3 gigs??? Then take the 1 gig back out replace with the other new 2 gig and wont reboot again. Â
I recently got the 2.4 20" iMac. Since a lot of people recommended Crucial for the memory upgrade. I went ahead and ordered 4GB from Crucial. I had my iMac for about 1 week before I put in the new memory. I never noticed it freezes on me at all before I put in the memory. After I put in the memory, it intermittently freezes and there's nothing I can do except hold down the I/O button to turn it off. It would freeze for no reason, but I noticed it freezes often when I used Handbrake to rip a DVD or even when I'm in Numbers doing just usual stuff. Finally today I put back the 1GB that the iMac came with, and so far, Handbrake is going OK. Could the new Crucial memory be bad? Should I call them up and ask for a replacement or return? Has anyone had this problem?
I have 20" iMac core duo 216GMZ w/ 1GB and want to upgrade memory, how much can I install? Have 2 512MB DIMM. Does the new RAM have to be same memory capacity for both DIMM? I wanted to upgrade from 10.6.8 to Lion and don't have enough memory which prompted the inquiriy. The Lion installer said I need to have min 4GB. How much memory in excess of 4GB is advisable for Lion to be a smooth running OS.
Since upgrading to SL I have had a lot of mouse problems. At first my logitech mx had a loss of functionality with most of the "extra" buttons. That was fixed in a later update, but now the mouse does move pause move thing. I uninstalled the driver and that didn't fix it. I tried going back to the mighty mouse, that had the problem. I tried the demo to steermouse with no luck either. My less than a year old mac pro is basically too frustrating to use.
I would like to upgrade the memory on my mac pro to 8gb (4 x 2gb) plus the original 2gb (2 x 1gb) that comes standard for a total of 10gb. I have looked on [URL] and the prices range from $198.99 to $799.99 for 8gb (4 x 2gb) kits. The Omni Technologies Optival is mighty tempting at $198.99 and I see that OWC has 8gb for $269. What do you recommend? Is Optival any good? The reason I an adding 8gb is for multi-tasking video/audio etc.
My updates of Flashplayer and Silverlight are not working. They worked as of yesterday morning, but by afternoon said I needed to update both, and now it is not allowing me to watch any type of videos/media on internet.
Long story short, My iMac stuffed up not long ago so I sent it to Apple to get it fixed (Apple Store Chadstone), I called them a week later, and I�ve been told that they were still working on it. A few days later I called again, they finally found the issue (sort of) and decided to replace the logic board�..anyway, I said OK, they later called me back saying they have replaced it but a new problem occurred, the audio/speaker is not functioning etc� I said well I will just take it back and fix it myself because I need it for �work�, I took it back and this is what I found so far: iMac�s serial number is gone! Oh also, on the repair report paper, it says I purchased this iMac on March 11 2009(March 11 is my birthday BTW), but I actually bought it in Nov 2008, so according to Apple Store, my iMac is now officially out of warranty.
I recently purchased a Mini Displayport to HDMI adapter and 30' HDMI cable to connect my iMac to my 42" Panasonic TV. It worked at first, and then suddenly didn't. I believe I upgraded from OS 10.6.7 to 10.6.8 in between it working and not, could that be the problem? I know the problem is not the cable as I tested it with my XBOX. I don't have a way of telling whether or not it is the adapter itself though though. When it plug it in, there is no blue screen on the iMac like there was at first. When I click 'Detect Displays' nothing happens.
Info: iMac, Mac OS X (10.6.8), 12Gigs RAM, Late 2009 21.5"
My fire wire 400 ports have stopped functioning, and my 800 is now having problems....I'm getting a protools message telling me there is a problem with my firewire.
I have an iMac, early 2009 OS X 10.9.4. Up until a few months ago I didn't have a problem with my memory card reader. The computer no longer detects the memory card reader. There is no indication by the computer that the memory card read has been plugged in. I bought a new memory card reader (different brand). The computer does not detect the new memory card reader. I have tried rebooting the computer. That did not make a difference. I tried unplugging all the USB devices plugged into the computer. That did not work
I use a Belkin AV360 so I can play my Xbox 360 on my new 27" iMac using target display mode. it has been working flawlessly since I got the AV360 until today where I haven't been able to get target display mode to work.
I've checked it is not the Xbox 360 being the problem tested it on my housemates TV. am also pretty sure it's not the Belkin AV360 itself because in system profiler under USB devices it says the "AV360 miniDP Converter" is pluged in and say same in Windows 7 bootcamp under device manager. I also tried my laptop which has a HDMI out on it.
my laptop says there is a "Belkin dongle" plugged in, I set the laptop to use the Belkin dongle at a external display and still I can't get target display mode to work.
Normally when I turn my Xbox on it automatically goes into target display mode or I can press cmd + F2 so to switch between iMac and Xbox. I have also tested my housemates Xbox in my setup and still the same problem.
I've bought new Thunderbold 27' display and connected it as a second screen to my iMac. Video works fine but I've just discovered that all ports of that display are not functioning, i.e. USB ports are not working, and I can't see its camera and speakers from my iMac. Is it possible somehow to get it working? Especially USB would be very wonderful.
I recently reset my imac 2 GHz Intel Core Duo to factory settings to completely erase the hard drive and start over. In doing so, I also deleted the OS 10.6.8 operating system that I had upgraded to. I had purchased the upgrade from the app store and it was easy to install at the time. Now, I am trying to access the app store to find that previously purchased app and re-install it BUT I cannot access the app store with my current browser and I can't upgrade my current browsers with my current operating system (10.4.11)...
I recently bought a new iphone 5S and in order to access my current itunes it says I need to update itunes to 11.1. In order to upgrade to 11.1 it needs and OS of 10.6.8. My iMac is only 10.5.8. Can I upgrade this imac's operating system? How?