Long story short, My iMac stuffed up not long ago so I sent it to Apple to get it fixed (Apple Store Chadstone), I called them a week later, and I�ve been told that they were still working on it. A few days later I called again, they finally found the issue (sort of) and decided to replace the logic board�..anyway, I said OK, they later called me back saying they have replaced it but a new problem occurred, the audio/speaker is not functioning etc� I said well I will just take it back and fix it myself because I need it for �work�, I took it back and this is what I found so far: iMac�s serial number is gone! Oh also, on the repair report paper, it says I purchased this iMac on March 11 2009(March 11 is my birthday BTW), but I actually bought it in Nov 2008, so according to Apple Store, my iMac is now officially out of warranty.
I am running leopard on an iMac 24" and am having trouble getting my iSight camera to record audio on 2 channels. I have changed my audio input to line in (inbuilt input) in order to record using a better microphone than the inbuilt one in my iMac, and am running a Shure microphone into the input in the back of my iMac via XLR to 1/4" stereo jack cable and then through a 1/4" to 1/8" stereo jack adapter. However when recording video in Photo Booth, iMovie etc. the audio only plays back out of the left speaker. It is not a problem with the output because all of my other sounds (music from itunes for example) play fine out of both left and right speakers. I believe I have run everything into the computer just fine and I can get 2 channels when recording like this in Garageband and Logic.
I have a 2.1 Logitech Z4 setup, and the sound is only coming out of the left speaker. I have checked the wires, they are fine, and both speakers do work - but it could be the socket that's the problem. It's plugged into the line-in socket, I have put the output in System Preferences to Headphones, and everything is inserted correctly.
What do I do?
EDIT: My sound system is plugged into the headphones jack. I have tried putting headphones into the headphone jack and the sound also only comes out of the left earbud.
The speaker and audio in/out isn't working. Me and my friend were recording music on garage band and got some mic feed back. All of a sudden the speaker and audio ports stopped working. Is it something I can fix on my own or do I have to take the computer into apple and get it fixed.
I came across some youtube video with dual-language audio; ie. one language on the left channel and another language on the right channel. The Output page under Sound preference does not have the left/right balance control, probably due to the mono speaker in MBA. If I connect to an external speakers, or headphones, then the balance control re-appears. Is there a way to get around this problem, if I still want to use the build in mono-speaker?
How do I get my imac to recognized the 4G memory upgrade I just inserted (from 2G factory)? It isn't running faster and the "about this mac" still says 2G.
Info: iMac, OS X Mavericks (10.9.4), Vintage 2008 imac
I use a Belkin AV360 so I can play my Xbox 360 on my new 27" iMac using target display mode. it has been working flawlessly since I got the AV360 until today where I haven't been able to get target display mode to work.
I've checked it is not the Xbox 360 being the problem tested it on my housemates TV. am also pretty sure it's not the Belkin AV360 itself because in system profiler under USB devices it says the "AV360 miniDP Converter" is pluged in and say same in Windows 7 bootcamp under device manager. I also tried my laptop which has a HDMI out on it.
my laptop says there is a "Belkin dongle" plugged in, I set the laptop to use the Belkin dongle at a external display and still I can't get target display mode to work.
Normally when I turn my Xbox on it automatically goes into target display mode or I can press cmd + F2 so to switch between iMac and Xbox. I have also tested my housemates Xbox in my setup and still the same problem.
I'll be using the Air and all of a sudden there will be static or electrical buzzing coming out of the right speaker on my 13" MacBook Air. It's about 16 months old.
Info: MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
The tower speaker just doesn't cut it and I want to hook up my 5.1 Locitech speaker system. I couldn't find any Mac sound cards on newegg and am having trouble finding results anywhere else. What card is recommended by most Mac Pro users? My professions isn't in audio so it doesn't have to be perfect, just something to play games, music, and movies.
I play movies stored on my iMac through my speaker system and HDTV using a Mini Display to HDMI cable plugged into my reciever. I'm currently piecing together a 5.1 seperates system but currently only have the front left, front right and centre speakers (3.0). I've played around to try and get the iMac to output though all three speakers but the audio only comes through the left and right channels and ignores the centre speaker completely. Even when I set the output in the 'Audio MIDI Setup' to 5.1 it still doesn't recognise a centre channel.Stereo output is fine but it would be nice to get the centre speaker in use rather than just sitting there in silence.
Info: 21.5" iMac 3.6GHz Intel Core i5 (Late 2010), 1TB HD, 8GB RAM, Mac OS X (10.6.7), 1TB WD MyBook Studio External HD / iPhone 4 16GB / iPod Classic
A few months ago I bought : iMac 27" 2.8 GHz Quad Core i7 8GB DDR3 SDRAM 2x4 2TB Serial ATA Drive ATI Radeon HD 4850
Actually, still moving into it from the old one, haven't spent allot of time on it, hard to get out of the old one with my photoshop work. Anyhow, whats a good external speaker system for it? I find myself with the volume maxed out on the internal iMac speakers now, don't think it's too good to keep doing that. Is the amp in the iMac my only control over volume? Can I buy a speaker system of very good quality that may have amps within them so I can get more volume to them? I have a real top end stand alone stereo system, but doubt the iMac iTunes can be run through that.
I have a creative 5.1 speaker setup and just recently found my old sound blaster external card from my PC from years ago. I went on the creative website to try and download drivers for it and their weren't any (surprise, surprise). So I've been trying to figure out how to use my speaker setup so I can watch movies from iTunes in 5.1 surround sound. When I plug in the card through USB the sound tab in the system preferences reads it as the SB Live! card (which it is).
Then when I go to the Audio MIDI Setup, it also reads the card and the speakers I have connected to it. When I go the configure speakers tab, it shows them and all when I click on them to test them, it shoots out noise through each speaker. But when I go back to iTunes and enable surround sound in a movie, nothing happens. Is there something I'm doing wrong? Is there any software I can download so I can use my speakers?
I have yet to buy external speakers for my intel IMac, however, I am noticing more and more a very annoying "crackling or popping" every so often... random "crack/pop"... what is going on? The machine is still under warranty if this is a serious problem... but boy it really is annoying when it happens.
I have a stereo hooked up to my iMac and everything sounds great. What I'm wondering is this. Is there a way to have sound come out of BOTH the internal speakers and the headphone/audio out jack?
Ok so my iMac g3 has a left speaker that doesn't work. The right one works fine and when I turn the volume up the left speaker kind of buzzes. Is it even worth replacing the internal speaker? (IIRC it looks pretty difficult)
I am awaiting my new iMac to arrive and have a question about my current speaker set up and if it will be compatible with my new iMac. The speakers are the 5.1 set and have 3 coloured connectors which connect to the back in my sound card. However, looking at the back of the new iMac, I see no connection for these 3 cables.
I'd like to use the "Bose Acoustimass� 10 speaker system" [URL] for iTunes music out of my iMac and somehow be able to switch the audio over to my T.V. whenever to play Xbox and watch movies through it as well.
I just turned on my G4 17" 800mhz iMac and there was no gong. I thought it was just turned down. So I opened iTunes and cranked the sucker 2 notches past 10 and still nothing!
I'm going to buy my parents some speakers to go with their new iMac this christmas. I've introduced them to iTunes and they are learning how to buy music, but naturally the internal speakers aren't very good (although they are better than I thought they would be). I'm looking for 2.0 or 2.1 setups, preferably something with a sleek, minimalistic, industrial design (and decent sound quality). Price range is $<100.
Here are some I'm looking at: Logitech Z523 [URL] Logitech Z320. Bose Companion 2 [URL] Logitech Z313 [URL]
I was in iTunes when I heard a slight grinding sound form the speaker area and I thought nothing of it. About 5 minutes later I was watching a youtube video and the grinding got louder to the point where I could no longer hear the video. I immediately powered the iMac down and upon reboot process, the grinding sound could be heard again. After the booting process, the sound is gone. I am wondering what it was and if I should waste my time taking it in to an Apple Repair Shop
I just noticed that the sound of my 21.5" iMac speakers kinda changes notably when I'm using Windows (BootCamp). Compared to the sound while using Snow Leopard, it sound very thin, bass-less and... just strange. More like MacBook speakers, or just small speakers. Another thing is that the headphone input doesn't work on Windows. Could these issues be related to audio drivers? I don't know much about that sort of stuff.
I just received my refurb 2.8Ghz 24" iMac today. I have been setting it up and transferring files to it for the last few hours. I just installed 4GB of RAM from Crucial to upgrade from my 2GB that came preinstalled. I opened Hulu and started watching a video full screen while I was working on something in the same room. All of a sudden the playing video froze and there was a loud high pitched squeal coming from the speakers and some crackling, followed by another high pitched squeal from the speakers and then the computer froze.
I know it wasn't a fan noise or a hard drive noise, it was definitely a high pitched audio tone and crackling from the speakers when it hung up. The only way I could make it stop is to hold down the power button and turn it the iMac off. I wonder if it could have been my photo collage screensaver kicking in while the hulu video was playing fullscreen that caused something to lock up? It seems like it was in the timeframe from when I walked away from the computer to the time it crashed.
My friend is looking into buying the new 27" iMac Core i7 to replace his PC desktop. The only thing holding him back is that he has an analog surround sound system he uses for his speakers. I am having a hard time myself finding a converter that can make his speakers work in the iMac's optical digital output port. Any products out there that will do that?
Out of the blue, the eject key on my keyboard produces no results whatsoever. Also, pressing the eject button in Finder does not work, and dragging a disc to the trash does not eject it, either (it does change the trash can to the eject symbol, though). The specs for my Mac Pro are in my signature (Early 2008 2.8).
I looked up a terminal commands to this, and found the following, all of which work on my Mac Pro: drutil tray eject drutil tray close drutil tray open
I made AppleScripts for those, all of which work every time, no problem. Audio CD's eject from iTunes when pressing the eject button within iTunes as well. I have a workaround, but I want everything back to normal. Do you know of any solutions to restore functionality to the eject button on the keyboard, within Finder, and dragging discs to the trash?
I have a macbook air which I bought on ebay a few months ago - it was a few months old when I bought it. I am absolutely delighted with it in general (I was a PC user until then...) but a few days ago the number eight key stopped working. The rest of the keyboard still works fine. As far as I know nothing has been spilt on the keyboard but I suppose it's not out of the question that some crumbs or something have got in...
Anyway, I have an appointment at the Apple store in a few days, but I'd be really grateful for some informed opinion about what to expect.
For example, is this likely to require replacement of the keyboard? If so, am I right in thinking that with the Air that would involve replacing the whole upper body (if that's the right description) as keyboard, trackpad etc all seem to be one unit.
And if so, is that the kind of job that involves the machine being sent away - or are they likely to be able to fix it in store?
I just got the USB Battleship that was featured in this Gizmodo article: [URL] I plugged my printer, card reader, external hard drive, my backup hard drive into it and the drives made clicking sounds and didn't appear on my desktop. So I unplugged them and tried the ports on my MBP. It worked so the USB battleship wasn't functioning. What could be the problem? Not enough power?
