I've bought new Thunderbold 27' display and connected it as a second screen to my iMac. Video works fine but I've just discovered that all ports of that display are not functioning, i.e. USB ports are not working, and I can't see its camera and speakers from my iMac. Is it possible somehow to get it working? Especially USB would be very wonderful.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I recently replaced the video card on my G4 and now the USB ports on the back of my apple studio display are no longer functioning, but the monitor itself is functioning just fine. The USB ports on the tower are functioning normally.
2002 Quicksilver 933mhz G4
1.5gb RAM
17" Apple Studio Display via ADC connection
(New card) ATI Radeon Pro 9000 64mb AGP ADC/DVI
My fire wire 400 ports have stopped functioning, and my 800 is now having problems....I'm getting a protools message telling me there is a problem with my firewire.
Info:
G5 dual processor
I purchased one of these (model MC511LL/A) on Ebay. It has not yet arrived. The seller posted a canned Ebay description of the model touting the 2 Thunderbolt ports, yet Apple's official specs page does not show this model as yet having Thunderbolt, which does not show up in the iMacs until the 2011 models. Is it possible that some of the mid-2010 models shipped with Thunderbolt ports?
Info:
iMac, Mac OS X (10.6.8)
My usb ports in my c2d macbook don' t seem to be working. When I plug in my digital camera (sony) or itunes phone (motorola), nothing happens. I tried both of these devices on my 2 old powerbooks and they sync fine. Anyway I can check whether my macbook usb ports are functioning?
View 2 Replies View RelatedI recently purchased Thunderbold (TB) display and 17" Macbook Pro. My TB flickers quite often and disconnects. Then I have to power off TB and reconnect. All updates are current. Dont know what the issue will be. Is there any utility to check the condition of TB. I did not connect any peripherals to TB except the Macbnook Pro.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I have a new 3.4 GHz Thunderbolt iMac and can't get Thunderbolt Target Display Mode to work with my current-model 13" MacBook Air or the current model 15" MacBook Pro furnished to me by my employer. Cmd-F2 just creates a beeping sound. I tried three different Thunderbolt cables. (They are not Mini DisplayPort cables. I have one of those from a previous model of iMac and it both looks different from the Thunderbolt cables and System Information doesn't show any change when I try to patch the computers together using it.)
All machines are fully updated to MacOS X 10.7.4 with all firmware updates applied. System Information shows that all are equipped with Thunderbolt interfaces; the Console app shows the kernel message indicating when the Thunderbolt devices are plugged in and removed; all three machines work in Thunderbolt Target Disk mode in both directions with all three cables with both Thunderbolt interfaces on the iMac.
I'm looking to run video out to two TVs, but it's over a decent distance, so I'm worried that using an HDMI splitter would cut the signal and suffer quality loss. I was wondering if both mini DisplayPorts can be linked to output the same signal at the same time, so that both TVs can show the same thing but each signal is at full force.Â
Info:
iMac
I have a 13" Retina Macbook Pro and I'm connecting it to 2 Asus monitors that I will be getting soon through thunderbolt to HDMI. The 2 monitors have built in speakers and I would like to have them both pick up the audio from my computer. Is there a way to do that? I know in the preferences I can't choose more than one audio output. Is there perhaps a software that can tweak that? I'm not looking to get a sort of hub that will pick up audio from the audio jack on my laptop because the monitors only have an output jack (green jack) and therefore, I assume, you can't insert audio into them that way.
View 1 Replies View RelatedIs there as way to connect to two cinema display on 21.5 mid 2011 iMac with only 1 thunderbolt port?
Info:
iMac, Mac OS X (10.7.3), Cinema display
With my 'old' Intel iMac using a Display Port adapter, my 24" LG Monitor would be detected correctly and worked first time. With my new 2011 iMac 27 using a genuine Apple mini DisplayPort adapter plugged into the Thunderbolt port, this same monitor now shows up as a generic VGA monitor and the range of resolutions is severely reduced - basically it looks terrible. I've tried disconnecting the cable, reconnecting, using the second Thunderbolt, changing resolutions, detecting displays, showing displays in the menu bar. All with no success.
Info:
iMac
if i Connect my Macbook air to the apple Cinema Display through thunderbolt is the air getting power supply through the Display?
View 1 Replies View RelatedI use MBP (late 2011). I find the hunderbolt port to be similar to the mini-display port of older mac. I wish to have another display, but not ready to spend $999 over a thunderbolt display from mac. So would like to know if a Mini-diaplay port converter from apple would help me connect a exernal display via the thunderbolt port?
Info:
MacBook Pro, Mac OS X (10.7.4)
Is this possible, and if so, presumably the displays - bottom levels of the glass will be at different heights?Â
View 1 Replies View RelatedI've got a 20" external Dell LCD monitor running off of a new White Macbook. When in Mac OS, the display works perfectly. However, when rebooting in windows XP all I see is the OS loading screen before the display goes black and nothing ever shows up. I've got the monitor connected via mini-DVI to DVI connector.
View 1 Replies View RelatedI use a Belkin AV360 so I can play my Xbox 360 on my new 27" iMac using target display mode. it has been working flawlessly since I got the AV360 until today where I haven't been able to get target display mode to work.
I've checked it is not the Xbox 360 being the problem tested it on my housemates TV. am also pretty sure it's not the Belkin AV360 itself because in system profiler under USB devices it says the "AV360 miniDP Converter" is pluged in and say same in Windows 7 bootcamp under device manager. I also tried my laptop which has a HDMI out on it.
my laptop says there is a "Belkin dongle" plugged in, I set the laptop to use the Belkin dongle at a external display and still I can't get target display mode to work.
Normally when I turn my Xbox on it automatically goes into target display mode or I can press cmd + F2 so to switch between iMac and Xbox. I have also tested my housemates Xbox in my setup and still the same problem.
How can i use my Thunderbolt Display on my Mac Pro?
Info:MacBookPro, Mac OS X (10.6.8)
Does my macbook work with the thunderbolt display?
Info:
MacBook
Will a mid 2010 version MacBook Pro work with a Thunderbolt Display?
Info:
MacBook Pro, Mac OS X (10.7.3), Thunderbolt Display
Can I use my 27" Cinema Display with a 2012 MBP with Thunderbolt? The 27" Cinema Display is less than a year old but with the DVI cable, USB, and charger.
View 1 Replies View RelatedI just received a new Macbook Pro (2012, retina display) and a 27" Thunderbolt display. I am having problems getting the notebook to turn on the display. I called Apple (Monday) and they had me reset the SMC and then the PRAM. After this the monitor was recognized and worked fine for the rest of the evening. However, when I turned things on yesterday evening the monitor would not turn on, and resetting the SMC and PRAM (multiple times) has no effect.
Info:MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4)
I have an early 2008 Mac Pro. I wanted to upgrade the video card, but had 2 questions.
1. Is the 4850 the best card to get right now? This card was announced a long time ago and nothing new seems to be coming out anytime soon. I don't want to buy this card and have a new card announced soon after.
2. The ATi has one display port and one DVI. Is there a card with 2 display ports?
My Macbook Pro (15 in 2 GHz core i7) absolutely crawls when I plug in the thunderbolt display. I'm running on snow leopard with 4 gigs of memory. Ive made all the neccesary updates. I plug in the screen and close my laptop and the computer gets unbearably slow. Once I open it up it gets way better and when I unplug the display it goes back to 100% speed. Ive called apple and they cant figure it out. Ive taken it to the apple store and they tell me they cant figure it out.
Info:Thunderbolt display, Mac OS X (10.7.3)
I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port? I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.
Info:
iPhone 4S, iOS 5
What do I need to do to fill my Thunderbolt display? I hate wasting part of the display.
View 2 Replies View RelatedI have the latest Mac Pro with a Cinima Display, and, yesterday, I have bought a Thunderbolt Display. Unfortunately this new display does not work with my big mac. Has anyone a clue if Apple or a third party supplier is offering or will offer a graphic board supporting Thunderbolt Display or rather an adapter doing so?
Info:
Mac Pro (Mid 2010), Mac OS X (10.6.8)
I have a new 2012 Macbook pro 17 and a 27 inch thunderbolt display.Â
The Macbook was working great. Then I connected it to the thunderbolt display and did clamshell mode. That worked well too. But.. then I powered down the macbook, disconnected the thunderbolt dislplay and tried to boot back up again. The mac book powers on, the back light comes on, I hear the chime then that is it. The back light stays on nothing else happens. Resetting the PRAM can not be done. Any of the boot options are ignored. It is like the keyboard is non resposive. I tried all the reset and boot combinations available but nothing works. Â
The light on the front of the macbook comes on then goes dim. The apple logo on the lid stays lit, and if I close the lid, the apple logo goes dim and the light on the front lights up. Weird, it is almost like it goes to sleep when it turns on. I tried conntecting the thunderbolt again but no joy. I am really disappointed. This is less than a month old and its already going in for repair. It should be replaced. Â
Info:
MacBook Pro, Mac OS X (10.7.4), I am disapoint.
So my macbook pro (2011 late model) has the fan speed of around 2000 rpm during the normal use.Â
Then, when I connect it with a Thunderbolt display (with an ethernet cable for internet), the fan speed is increased to 3200-4000 rpm suddenly.Â
I just don't understand how connecting to a display alone will increase the need for cooling that significantly.Â
I recently purchased a Macbook Pro and a Thunderbolt display. It appears when I plug my Macbook Pro in with the power adapter directly to an outlet, it charges fine. However, if I use the charger on my Thunderbolt display cable, the status reads "Not Charging"... sometimes. Sometimes it works. Sometimes it appears to toggle between charging and not charging. Is this a known issue with Macbook and Thunderbolt? I assume it should always be charging if it's plugged in and the battery is low.Â
Info:
MacBook
Pro, Mac OS X (10.7.4), Thunderbolt Display
I've been having a nightmare getting WIndows 7 to work properly with the second display on my MBP 15" (Early 2011) i7.Â
I'm currently running Lion 10.7.4 which works fine on both the internal laptop panel and the external AOC monitor through a Thunderbolt -> VGA Apple Adapter.Â
Bootcamp installed Windows 7-x64 with no issues, but when it came to trying to get the second monitor fired up it wouldnt.Â
I noticed when I installed WIndows and when I boot into it, that the screens mirror one another, I take it this is the Intel GPU running. I'll explain why in a bit.Â
1) I updated all the bootcamp files through Apple Update, no change
2) WHen I extend the displays, Windows sees the display, make and model without any issues, but it gets no signal
3) I then manually removed the ATI Radeon HD6xxx drivers manually, rebooted and both displays mirrored again throught a 'standard VGA adapter', this is why I assume this is the Intel kicking in.
4) I downloaded the latest ATI Drivers... ATI Mac Drivers -> Bootcamp -> Macbook Pro
5) Rebooted, and still stuck at step one now...Â
Info:
Mac OS X (10.7.4)
