Last time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 RepliesLast time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View Relatedi have a mac performa (1997 running mac OS 9) hard disk and i want to move its files to a macbook pro (early 2011 running Mac OS X 10.6.8) how can i do this operation? and if i can, will the files on the hard disk be executable? i have some filemaker pro 2 documents that i need, will i be able to view them?
Info:
MacBook Pro, Mac OS X (10.6.8)
can you tell me how to repair system files without formatting my hard disk.
View 7 Replies View RelatedI have a MacBook with MacOS 10.5.5. I purchased Snow Leopard and want to install it, but I forgot my master password. I know what the password is supposed to be, but it doesn't work when I type it in.I cannot find my original MacOS 10.5 disk to re-do the password.
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View Related
previously i have a problem for unable to login after my MBP hanged and restart.
i search online and found a solution to it which is to remove ATIRadeonX1000.kext . however by doing this there is a lot of inconvinent for me.
so i would like to ask if there is anyone here who has got a better solution?
Is it possible to use a 10.6 disk that was included with my purchase of a MacBook to perform a clean install of snow leopard on my 2 year old Mac Pro? I remember back in the system 9 days all we had to do was a key combination(command-shift-K methinks?) at the install screen to use the system discs on other systems...
View 7 Replies View RelatedI cannot believe I am actually in this position, but I accidentally reformatted my lacie 1TB external HD. The files were not overwritten as it was the most basic and quick format option, but they are not accessible.
Can anyone recommend a good data recovery app that works for OS X?
Anyone know what the best course of action would be?
Any advice would be greatly appreciated.
I've removed my old hard drive from my macbook (which I have sold) and am about to buy a new 13"mbp. Unfortunately I couldn't buy the new machine before selling the old, so I am presented with a problem. I could just install the disk in the new machine (its a 320gb 7200rpm, so in the long-term I'll be doing this in any case), but I'll want iLife 09 on there and its possible there are system files that are required for the new machine that wont be on my old system (10.5.7, from a 2007 macbook).
The main thing is that I want all my files, and applications and settings, plugins etc., on the new mbp, but because I don't have the old laptop I cant use migration assistant. The disk is in a usb enclosure currently. So, do I install the old disk and then try and update iLife, or will I run into problems? Or, can I transfer my applications and all their settings via some other means? I have a (full!) lacie firewire external which I could perhaps employ.
i need to copy data from MAc to my external hard disk, con'n can copy but iam administrator on the computer
Information:
Mac OS X (10.5.6)
When I try to partition my hard disk, Disk Utility tells me that the file system cannot be read.
View 3 Replies View RelatedI've created a Snow Leopard boot disk using this method link. I created it on a 16GB CF Disk. I've tried it twice. First time I formatted the disk as eXfat with 1 partition. Next time I used Mac OS Extended for a 7Gig partition and fat32 for the rest.
Upon boot I get the normal install stuff like I do with the DVD, but then no hard disk shows up. I thought it was because of the eXfat which is why I tried again. I looked into the system profiler and I can see my seagate hard disk, but under disk utility it doesn't exist. My Sata DVD drive shows up though. If I boot off of the DVD I can see and install to my hard disk.
I'm trying to make a USB Disk because I'm planning on getting a SSD and I will be removing the Dvd drive.
This is a Mid 2009 Macbook.
I am trying to partition my current HardDrive so I can run a Macintosh on half of it. The other half will of coarse be windows. I've tried programs like BasiliskII and SoftMac, neither work.
I grabbed some spare 10.4 disks I had, and my computer refused to read them. So I got my hands on a different set of 10.4 install disks and my computer still refused to read them.
I am trying to do this because it's a project for my Computer Hardware class. I've spent way too much time on this without any progress.
I usually just turn off my monitor at night but for some reason, the HD constantly makes spinning noise even then the computer hasn't been used for hours ( i don't run time machine ).
Is there any way to tell what process is causing this stupid HD activity? My previous Dell machine was so much more quiet than this POS. I prefer not having to explicitly put the machine the sleep every time.
I ordered a second hard drive for my powermac g5.Its a 400 gig seagate drive.I power off my machine,unhooked everything and plugged in the drive.
I boot up and the drive isnt showing in disk utility.Is it something i did?
My intention is to partition an external HD in half allowing it to serve as a backup for a pc running windows xp, and the other half as a backup for a mac(10.5. I am using a Seagate external HD(new) that was initially partitioned on a windows xp computer.
The 1st half of the 1TB HD was formatted in NTFS format, and the second half was erased and (I thought) reformatted in HFS plus but when I attempt to use CCC(Carbon Copy) to copy the mac 1/2 of the hard drive, I get this message:
"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs."
I have read the recommendations that the external HD need to be partitioned with APM or GPT, but I cannot seem to get to that option now for the mac side of the external HD.
In the Disk Utility, the external HD shows both sections of the partitioned drive(the xp section and the leopard). I do not want to reformat the entire drive(both sections) if at all possible.
I just want the Mac side of the ext drive to be properly prepared for CCC, and the windows side to remain as is.
recently the harddisk of my macbook pro crashed and I had it replaced with a SSD thinking I could use the old harddisk as an external but now it seems like the crashed harddisk cannot be detected by my macbook. What should I do?
Info:
MacBook Pro, Mac OS X (10.7)
Ok so here it goes.
The situation I'm in is pretty akward and it's quite a long story but I'll try my best to explain everything.This afternoon I went to a friend's house to transfer some data to my external hard drive (MyBook Studio).Since my HD is formatted as HFS+ and my mate owns a Windows PC, I'd asked him to install MacDrive.
When we plugged in my HD, Windows just didn't detect it. We tried all sorts of things, including rebooting.. but nothing seemed to help. No matter what we did. The damn thing just didn't detect my hard drive. Not even with MacDrive.
I desperately wanted to transfer some data to my HD since I'd drove quite a while to get there. So after a bit of Google research we decided to create a partition. My HD has a capacity of 1 TB and only about half of it was being used.So we went on and created a NTFS partition of 400 GB. Now Windows could detect the partition we'd just made.
Everything went fine, we could now transfer some data to my HD.Nevertheless.. when I got home and connected my HD to my Macbook Pro, Finder could only see the partition which we formatted as NTFS. The other 600 GB, which we hadn't touched.. is nowhere to be found.
There's quite a lot of important data on there so I would really appreciate it if anyone could help me.
Hi! Im new to the forums but i really need help with something and i was hoping someone here could help me out. So I just installed Tech Tool Deluxe onto my macbook and then shut it down later. I went back to use it again and when i turned it on a login screen appeared asking me to put in my password. I did that and the screen turned blue (looking like it was loading) and then went back to the login screen. Every time i put in my password it just takes me back to the login screen. I have had my mac for a while and i dont want my hardrive to get wiped out so what do i do? Thank you for looking
View 1 Replies View RelatedI'm using a macbook and would like to copy over several games over to my friend's external harddrive. The files are rather large -8gigs, 6gigs, 4gigs.
For some reason it wont allow me to copy the files to the HD. only prompting me with the message "the operation can't be completed because an unexpected error occurred (error code 0)".
I presume that it's formatted correctly because I was able to copy a smaller file (363megs) without any troubles. However, whenever it involves these large torrents it prompts me with that same message.
I am able to copy files on a pen drive but I am unable to copy files on a hard disk directly.
Info:
MacBook Pro, Mac OS X (10.7.3)
I work for a company that has several Macs available for customers' use. These are basically demo-machines that they can play with, and at the end of each day, the machines are wiped and rebooted.
The way we do this is simple: the machines auto-login to the Guest account, which will wipe the account at the end of the day. Well, getting a few new Macs in this week, I simply copied over the entire Guest user account to the new machines to avoid reloading all the demo content, preferences, etc. And truthfully, the machines have been working great.
Except one thing. The computer keeps giving me that annoying message that says "Safari (or Finder, or System Preferences, or anything!) wants to use keychain 'login'". And asks for the login keychain password. Well here's the thing: the Guest accounts don't have passwords!
So I looked up a little bit on this topic, and did things like... Went to "Keychain List" in the Edit menu of Keychain Access, and deleted both the "login" and "system" keychains. No help. I went to Preferences in Keychain Access and said "Reset My Keychain". When doing this, however, it asks for the new password for the login keychain.
The problem with this is that I cannot leave the field blank! The Guest account doesn't have a password, so how am I supposed to not create a password?
G4 MDD networked with Mini for approx. 3 years now via a LinkSys BEFSR41 wired router. Ethernet cables are CAT6's with gold-plated ends. Did an erase/install (+ updates) of Panther on G4. ISP is Comcast Cable. Just upgraded my Motorola modem from Surfboard 5100 to SB 5101 yesterday. My network settings are ok...file sharing is turned on...I can ping each 'puter from the other (showing my connection is good).
I have internet access (showing that the router is still good according to Cisco). Now, however, I can't even bring up the window on the G4 asking for my pw....all I get is connection failed, no response from the server. From the Mini, I get Unknown User, incorrect password or login is disabled. I haven't a clue what the problem can be. Everything I do daily depends upon the network connection.
i ve recently activated the default guest account in leopard. However even though when I check in the accounts.prefpane it says that it is on and its 'login only' and when I click on the account it says 'allow guests to login into this computer' and its on.
However when I boot up my machine and click on the guest icon, it wont let me in as it shakes the menu(login failed).
How do you get the install destination hard disk to show up when re-installing the operating system? I'm trying to re-install my OS and can't get past this step because the destination disk does not show.
Info:
MacBook Air, Mac OS X (10.5)
The free space on my MacBook is disappearing fast but I don't know why. I am hoping someone can tell me where to start solving this problem. It must be invisible files but what can I do about it? This started after I restored from a Time Machine backup to a new hard disk after the hard disk failed (another story). The Time Machine backup was about a week old (isn't it always the case?) so I don't think it is likely that I could have restored anything that might have had anything to do with the hard disk failure. Everything seemed to be working fine, having spent hours resorting emails and trying to reconstruct files I had lost from the week I didn't back up. During that week I had bought an iPhone. When I connected it to the restored computer it deleted all the apps I had installed. Not a big problem, as I was able to track them down from an iTunes receipt and reinstall them. I then attached my iPod and the computer had to replace all the files with new ones. As there were a lot of songs and photos I left it to do this and went to bed. Next day the iPod now had newly replaced files and seems fine. But there is a warning that the startup disk is full. No new files had been put on the computer, which had about 9.5 Gb free space. I deleted some files so I could do some things with the computer to find out what was happening. The space thus freed soon disappeared. I then deleted Parallels Desktop so that I could free up more space. I now had 29.67 Gb free space. I tried searching for large files but nothing suspicious seems to detectable. By the end of the day the free space had gone down to 24.39 Gb. It now stands at 23.22.
View 2 Replies View RelatedI recently picked up a USB Hard Disk, I plan on copying large files to it (for example 20gb VMs), I am wondering whether or not finder can copy files as large as 20gb one at a time because the last time I tried to do this on a USB Stick, the file transfer would either freeze or would end up taking way too long to transfer and in the end I had to pull it out and having to reformat it. DOes anyone here know if such things will happen again copying these files?
View 4 Replies View RelatedI have to send my Mac Book Air to technical service. They told me they cannot guarantee to save the data in the computer so I should save all my data. I cannot pass all the pictures and files to a hard disk. How do I do this?
Info:
MacBook Air, iOS 5.1
