MacBook :: Unable To Copy Iso's To External Hard Disk?
Mar 30, 2010
I'm using a macbook and would like to copy over several games over to my friend's external harddrive. The files are rather large -8gigs, 6gigs, 4gigs.
For some reason it wont allow me to copy the files to the HD. only prompting me with the message "the operation can't be completed because an unexpected error occurred (error code 0)".
I presume that it's formatted correctly because I was able to copy a smaller file (363megs) without any troubles. However, whenever it involves these large torrents it prompts me with that same message.
I have an external HD where I back up data from other Window laptop. when I connect this HD to Macbook, it is available as read only. I cannot copy files from my MacBook Hard disk to the external HD.
How to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk.
Info: MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.1)
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
I have OSX leopard as a disc image on my desktop. When I try to copy the .dmg file over to my external hard drive it copies for a while, then an error message says it can't copy it over and stops. I'm really confused as this sort of problem doesn't usually happen.
I'm running Tiger 10.4.11 and I want to install Leopard. The Leopard disc image is 6.66GB.
I can't burn it to a DVD either because the discs I have are 4.7GB & the .dmg is 6.66GB. Do I need to buy a bigger DVD blank disc?
Another question is how I should burn the disc. Should I simply burn the .dmg file straight onto a DVD (if I can get one that is big enough!) using Disc Utility?
I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
The same is working fine with USB flash memory.
Info: iMac, Mac OS X (10.6.8), The same is working fine with USB
My intention is to partition an external HD in half allowing it to serve as a backup for a pc running windows xp, and the other half as a backup for a mac(10.5. I am using a Seagate external HD(new) that was initially partitioned on a windows xp computer.
The 1st half of the 1TB HD was formatted in NTFS format, and the second half was erased and (I thought) reformatted in HFS plus but when I attempt to use CCC(Carbon Copy) to copy the mac 1/2 of the hard drive, I get this message:
"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs."
I have read the recommendations that the external HD need to be partitioned with APM or GPT, but I cannot seem to get to that option now for the mac side of the external HD.
In the Disk Utility, the external HD shows both sections of the partitioned drive(the xp section and the leopard). I do not want to reformat the entire drive(both sections) if at all possible.
I just want the Mac side of the ext drive to be properly prepared for CCC, and the windows side to remain as is.
I created an image of an external hard drive to back it up, then I checked it and it opened fine. I moved the file to another drive and initialized the original drive and dropped the dmg file back onto the drive. Now it won't open. I really need the files on that drive. Is there any way at all to open it if even for a short time to retrieve the files?
I am trying to copy my iTunes folder from one external hard drive to another external hard drive but I keep getting an error message "unable to copy because file (song name) is in use". It starts copying for a while but keeps stopping when the error message pops up. No songs are playing so I am not sure why it says certain song files are in use.
I received an Acomdata 2Tb external hard drive today from Amazon and plugged it in. Time Machine popped up and I declined to link the hard drive to it. I went into Disk Utility and chose the new hard drive on the left column and went to erase. I chose Mac OS Extended. I named it and hit erase. It started going, and going..... and going... and a half an hour later I knew something was wrong.
Disk Utility was not responding and I eventually had to Force Quit. Now I cannot format the hard drive. I starts and then it stops with a disk error. I tried to run the First Aid verify and repair and both stopped after a few seconds with an error. What do I do?
I have to send my Mac Book Air to technical service. They told me they cannot guarantee to save the data in the computer so I should save all my data. I cannot pass all the pictures and files to a hard disk. How do I do this?
Cannot copy to MacBookPro or open InDesign docs from external disk.Error code -36 and -43.They appeared to be locked.I unlocked in Information, but receive the same message."The operation can't be completed because one or more required items can't be found."
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive” Checking file system Volume repair complete. Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I have had both my MacBook and external hard drive for over three years now, and have never had a problem. In the last week, my external hard drive stopped letting me copy files onto it. When you try to drag and drop it just comes up with the blocked symbol. I have tested this with other hard drives as well and keep getting the same error. I've read other forums where it seems the answer is just to reformat the hard drive to the correct format, but I've never had a problem before so it seems strange that the format would just suddenly change.
i had a External Harddrive.Currently i can Read//Write on it in Windows PC(Windows7)But when i use the same drive in Mac i can only read...but can't able to write. How to resolve this issue
i have been trying to copy files on macbook air to my external hard disk which i used for my windows pc, n=but im unable to do so. and i even cannot delete the files on the hard disk. but i can copy the files on hard disk to my air.
I want to partition my external hard drive for my g4 power based mac running Leopard.I will have one partition for Time Machine and the other for Carbon Copy Cloner.Here are my questions:1. Which partition scheme should I choose for Time machine?2. Does Carbon Copy Cloner work the same way for non-intel macs as it does for intel? Do I need to click on the OS 9 check box to make my version of CCC bootable (I want a bootable clone)? Which partition scheme should I choose for Time machine?
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
I've had an external hard drive for a while and occasionally had errors with it, but I just tried to back up a new batch of photos and I keep getting Error Code 36 - some data in the file is unable to be read or written. It doesn't matter whether I copy them as a group or individually, nothing's working. I even tried with a pages document to see if it was just photos, and NOTHING will copy - error every time. The drive is formatted in FAT32. It was originally in windows and I reformatted it using a windows program, no partitions. Originally I used it on a restricted mac that wouldn't let me install any software, so I've always just dragged-and-dropped files, which has worked fine until now.
