Is it possible to use a 10.6 disk that was included with my purchase of a MacBook to perform a clean install of snow leopard on my 2 year old Mac Pro? I remember back in the system 9 days all we had to do was a key combination(command-shift-K methinks?) at the install screen to use the system discs on other systems...
View 7 RepliesLast time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View RelatedLast time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View RelatedI have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
Yesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedRunning Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
could not be sure whether the Admin user - password reset with the CD would be the solution to my question as suggested in previous threads I searched - and have no idea where my start up install CD is
So my question-
I was trying to put parental control to ask for password when my computer starts up. I did something I guess and messed up the info.
I can log in with my own account when I restart my apple - which says now it is a standard account (must have messed that up)- but can not make any changes on system preferences or anything else that requires login and password. It requires Admin info. My own login that I use now used to be my admin so do not have any other info set.
now on system pref - accounts - an account titled "test" seems to be admin but can not even access that and reverse myself to be the admin since I can not unlock system pref. Or cant click on "Login Options" for the same reason.
There are no other users on this computer than me.
What do I need to do to make myself admin again?
Hope this was somewhat a clear question
the burning disk is maxwell dvd+r
an error appearing when burning ''failed to calibrate the laser power level''
i have mbp (late 2008)
how to fix it ?
I set up a 32g partition for windows xp pro. Loaded the disk and formated the partition to FAT. Hold option at startup and load windows. Upon loading windows i get the following message "There is no disk in the drive. Please insert a disk into drive." I have tried leaving the xp disk in, I have tried taking it out before loading windows and putting it in afterwords, nothing works. I can not eject disk while in windows.
View 1 Replies View RelatedI have a G4 Powerbook and I wanted to do a clean installation. I have my old my old mac mini dvds and thought I could use them on the powerbook. It says that it can not install that system in that machine. Am I missing something? Do I need a special DVD made for laptops?
View 5 Replies View RelatedI want to reformat my 2.33gh MBP. The problem i have is i dont have the original install discs that came with the computer. I am currently running snow leopard, which i installed with an upgrade disk. I borrowed a snow leopard disk from a friend who got a new imac recently and when i try boot from the disk to reformat it just says i cant install the software on my computer
View 2 Replies View RelatedI have just bought a new iMac with Lion preloaded and have been told that Apple no longer provide a system disc with new computers.Is this right? How can you reload the system, if it all goes pear-shaped?
View 4 Replies View RelatedI am trying to do clone the system only from my current hard drive to a smaller internal SSD. Tried with SuperDuper but the resulting drive was not bootable even though it had the system folder. Has anyone done this successfully?
View 3 Replies View Relatedfinally got a mac, i've been flip floping between wanting everything from ibooks to unibody macbook pros. But i found a early 08 macbook on craiglist for $650, and took that.So I'm using it now and i have a few questions. I've been searching but cant find answers to everything. 1. the macbook didnt come with a restore disk, I'm i right to think i can get one from apple for ~$35?
View 11 Replies View RelatedI was having problems with Incorrect Valance error message, ran my utilities' repair as advised. I noticed that my PowerPC G4 shows the OS as 10.3.9. Went to look at the disk that came with my Mac that I carry in my case - It says it's Version 10.4.2. Should I try to install this on my Hard drive? If I do, will it cause me any problems/will I lose anything? I have moved not that long ago, and almost all of my stuff is still boxed up, so no back up drive to mirror my drive to. I can't remember if I had to install the OS on my Mac when I bought it in '05 or not, but the disk that has the OS says it contains a later OS version than what my mac's "About this Mac" states.
View 4 Replies View RelatedI bought a used Power Mac G-5 OSX 10.4.11 (machine model Power Mac 9.1) My situation is, that it came without the back up disk. I need them in case of a crash, etc., but for now I need to get the classic OS9 installed onto my computer.Is there a way I can buy another set of system back up CDs?
View 7 Replies View RelatedHow do i stop my system from asking me to force quit applications?
View 1 Replies View RelatedWhere can I get another install disc for MacBook Pro?
Info:
MacBook Pro, Mac OS X (10.7.2), new another install disc
While I was partitioning my disk, disk utility froze, along with my whole system. So I was forced to reboot.
Now my Mac thinks there's an 80 gb chunk of data somewhere (the data that would have been my partition), but I can't find it. How do I regain the lost space?
I've tried using disk utility already.
View 24 Replies View RelatedRecently I archived and installed leopard from tiger. Since then sometime there is a message that comes up telling me I need to restart my computer in all different languages. Also when I try to verify and repair my disk permissions, this is what shows up:
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", ....
I've removed my old hard drive from my macbook (which I have sold) and am about to buy a new 13"mbp. Unfortunately I couldn't buy the new machine before selling the old, so I am presented with a problem. I could just install the disk in the new machine (its a 320gb 7200rpm, so in the long-term I'll be doing this in any case), but I'll want iLife 09 on there and its possible there are system files that are required for the new machine that wont be on my old system (10.5.7, from a 2007 macbook).
The main thing is that I want all my files, and applications and settings, plugins etc., on the new mbp, but because I don't have the old laptop I cant use migration assistant. The disk is in a usb enclosure currently. So, do I install the old disk and then try and update iLife, or will I run into problems? Or, can I transfer my applications and all their settings via some other means? I have a (full!) lacie firewire external which I could perhaps employ.
I want to restore and recover OSX & Logic 8 and the software i use with it (Apogee Maestro,UAD Quad & Waves plug-ins) to a new boot disk. I have both a back up of the main OS drive on a drive with Time Machine and a disk copy of the main drive (on another) as i had it before the boot disk crashed. My question is which is the best option to take when restoring the OS etc? As I have heard that there is a couple of bugs and issues when restoring via Time Machine. Is restoring via the disk copy a simple procedure? Or, should i reinstall everything completely from scratch and copy back the receipts and authorizations perhaps? Can you point me towards the best link/method to get my setup back on track? i'm using an apogee symphony pci card
View 1 Replies View RelatedI have a brand new 15 inch i5 mbp. I put a cd in to rip it onto itunes. It was really scratched. Now the computer ate my disc (I know I can restart and it will be ok, that's not my question). Shouldn't my brand new mbp be able to cope with a scratched disc? It seems a bit bizarre that the entire computer would freeze just because a disc is scratched. Also, it seems like it takes much longer to rip cds than it does on my pc. It doesn't just seem like it. It takes almost twice as long.
View 2 Replies View RelatedI'm getting a new Mac for some software development. More than likely it will arrive with the disk formatted as "case preserving but not case sensitive". This has bitten me more than once where one directory contains two files whose names are the same, ignoring case.
If I reformat the disk as "case sensitive" and reinstall MacOS, (1) will that work, and (2) if it works, are there any "gotchas" to be aware of later on?
I have an Imac 5,1 2.16 Ghz Intel Core 2 Duo running Mac OS X version 10.4.11 and am fairly new to Mac. I made the cardinal sin of not leaving all of the pc world behind me when I made the switch to Mac and one day after examining my software, I noticed what appeared to be an excessive amount of folders containing only 1 or 2 photos apiece, scattered throughout the system. I got the bright idea to "tidy up " a bit so I created a folder where I could easily find it, and moved the single pix there and then deleted the original folders. My mistake was soon obvious, when the slideshows I had created in Iphoto would not work and some pictures were missing.
My problem is this: I bought the computer used and it came with nothing but the main unit , the mouse, and keyboard. I found a fix to the Iphoto problem, but it requires the original system disk which I do not have. I do however have a factory Mac OS X Tiger disc from an old powermac G3 I have. I was wondering if that disc would work to reinstall Iphoto? If so, are there any special instructions to get it to work? And lastly, if it doesn't work what are my next best options?
My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
View 3 Replies View Related