OS X V10.6 Snow Leopard :: How To Repair System Files Without Formatting Hard Disk
May 12, 2012can you tell me how to repair system files without formatting my hard disk.
View 7 Repliescan you tell me how to repair system files without formatting my hard disk.
View 7 RepliesI ran a disk check on my MacBook Pro which told me to run disk repair. Since this was my boot HD, I took out my Installation DVD, put it into the running system and started the installation file then selected that I wanted to reboot and start utilities. The system then rebooted, the "chime" came, and then, silence, gray screen with apple logo, nothing is happening.What do I need to do, to get further and repair my hard disk?
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
I am having problems with my I-Mac. It is the 2.8GHZ 24" model and when I try to start it up I get a white screen with a blinking grey file folder with a "?" mark in it??
I had this problem before. Erased the hard drive and then reinstalled everything. I made it through it but I think I may have done it wrong. Anyways the computer worked good till the other day. I upgraded to Snow Leopard and now it is doing it again.
Do I need to start with the install disk 1 that came with the computer and install disk 2, then install snow leopard? Or can is there a faster route of doing this?
I have an external hard drive which I first used with my pc. It is formatted for NTFS. Now with my new MBP, I want to back up data, and I am having no luck. The external hard drive is a Verbatim brand, 500GB. On their website FAT32 download dosnt work! I have tried disk utility with no luck. What am I missing?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
I have a MacBook Air and just bought snow leopard. While I was trying to install it (through the use of the optical drive of my mac mini), a message came up "the disk "macintosh HD" needs to be repaired". Go to the computer with the mac OS X install DVD, open 'remote install mac OS X' (located in the utilities folder in the app folder) and follow the onscreen instructions for restarting your computer using the DVD. When the mac OS X installer opens, follow the onscreen instructions to install mac OS X. during the installation, the installer repairs the disk automatically". I'm worried about losing files on my macbook air (and do not use time machine) so should i be backing my files up?
View 10 Replies View RelatedI have an Intel Mac Mini running OS X Snow Leopard, the problem is since last November, I've had to use Disk Utility and my Snow Leopard Installation disk to repair my volume because of Permission problems, at least 3-4 times. And I know I shouldn't have to do this!
View 1 Replies View RelatedI repaired my disk premmisons on my mac, but in the history it says, Warning:Suid File "System/Library/core....as been modified and will not be repaired
View 3 Replies View RelatedI am having problems with a partition that I use as my Time Machine backup. I have searched various previous discussions but can't seem to find a solution. My HDD is split into 2 partitions and the Time Machine one doesn't mount, the other works fine. When I try to mount it using Disk Utility I get the error message: "The disk X could not be mounted. Try running First Aid on the disk and retry mounting". Then without doing anything else I get another message "Mac OS X can't repair the disk X. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can." Which disappeared after a few seconds and the partition mounted. When I try to repair the disk I get the above error message and another: "Disk Utility stopped repairing X. Disk Utility can't repair this disk. Back up as many files as possible, reformat the disk, and restore your backed up files." This appears after it says 'Updating boot support partitions…'. When mounted, I can open it in Finder, but when I try to copy 'Backups.backupdb' I get a message saying "The operation can't be completed because it isn't supported." This is the same for 'X's Computer' and each backup folder. I can copy files and folders in each backup folder but this would be very tedious and probably Time Machine wouldn't be able to use the resulting files. I have tried restoring the partition, through Disk Utility, to another HDD, but it just copies across the error. Disk Utility has been rather buggy as well, hanging on various operations involving the partition.
Info:
MacBook Pro, Mac OS X (10.6.8)
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
i have a mac performa (1997 running mac OS 9) hard disk and i want to move its files to a macbook pro (early 2011 running Mac OS X 10.6.8) how can i do this operation? and if i can, will the files on the hard disk be executable? i have some filemaker pro 2 documents that i need, will i be able to view them?
Info:
MacBook Pro, Mac OS X (10.6.8)
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Last time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View RelatedI ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI've got an 8GB Sony Micro Vault Pen Drive that's stopped working. When I opened up Disk Utility it appears but doesn't give me the option to erase.
Can I try doing it with anything else before I bin it and buy a new one.
Last time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View Relatedi need to copy data from MAc to my external hard disk, con'n can copy but iam administrator on the computer
Information:
Mac OS X (10.5.6)
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion.how to do this?
Info:
MacBook Pro, Mac OS X (10.6.8)
My MBPro is getting cranky in a number of ways that indicate a reinstall of Snow Leopard is in order. After the requisite disk first aid check I attempted to run the installer only to get a dialog box telling me that the system cannot be installed because this disk is used by time machine. The MacBook disk is of course a source for back ups but not a back up drive. Even after restarting and explicitly turning off Time machine I get the same results.What do I need to set to allow the installer to run. The installer cd is a stand alone snow leopard install cd, not a machine specific cd.
Info:A buncha Macs, IPad, iphone, iPod
I need to upgrade my 10.5.8 system to 10.6 before I can upgrade to Lion. I have a mac pro operating system disk for 10.6 can I use this?
Info:
MacBook (13-inch Early 2008), Mac OS X (10.5.8)
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
Just put a new Hard Drive into my Imac Dual Core. I Know I need to start up from the CD drive to format the disk... I am holding down the "C" key at startup but it isn't reading the drive.
View 3 Replies View Related