recently the harddisk of my macbook pro crashed and I had it replaced with a SSD thinking I could use the old harddisk as an external but now it seems like the crashed harddisk cannot be detected by my macbook. What should I do?
Info:
MacBook Pro, Mac OS X (10.7)
Just installed a new HDD into a macbook pro that was dropped. Seems fine, loads the disk and then says it can install the OS, i load up disk utility and theres no hard drive int he list just the optical drive and the DVD, its not the disk that came with the mac itself its either my proper retail one or the one that came with my personal older macbook which might be the issue. Ive taken apart and reconnected the HDD and all seems fine internally. Are there any issues that cause this except not using a full retail disk which im going to try later on, just wanted to rule everything else out.
View 7 Replies View RelatedI installed NTFS for Mac to read/write external hard disks that I shared between my Macs and PCs. It's doing find until recently after I upgrade my MacBook to Mac OS Lion.
It can still can detect certain external Hard Disk, but still cannot detect some external Hard Disk and Flash Drive even though it is supposed to be dual formatted.
Info:
MacBook, Mac OS X (10.7.4)
i have asus m2n68-am motherboard and amd athlon 5000+ processor, 80 gb sata. when i am trying to install mac os x in disk utility it does not show my hard disk, can you plese tell me what can i do.
View 1 Replies View RelatedI've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI'm using a macbook and would like to copy over several games over to my friend's external harddrive. The files are rather large -8gigs, 6gigs, 4gigs.
For some reason it wont allow me to copy the files to the HD. only prompting me with the message "the operation can't be completed because an unexpected error occurred (error code 0)".
I presume that it's formatted correctly because I was able to copy a smaller file (363megs) without any troubles. However, whenever it involves these large torrents it prompts me with that same message.
I have a Macbook and I just bought an iPhone 3G and it seems my mac is totally not responding to my iPhone.I have the latest updates but to no avail.I also have also just loaded intego virusbarrier 5. I heard that it is interfering with the sync of both devices. So how do resolve this problem without having to erase and re-install my harddisk
View 3 Replies View RelatedI have a macbook with leopard osx and use it frequently for presentations and so on. I have connected it to several monitors and projectors a hundred times and it has worked fine since last night.
Last night, I have connected my mac to a monitor with vga cable but it did not detect it and instead a constantly flickering blue screen came up and never went. I am sure the cables are fine.
I have two extra buttons on my logitech mouse: a button on the side and the scroll wheel button. I set up the logitech control center and set commands for those buttons, but nothing happens when i press them. Anyone know how to fix this?
View 2 Replies View RelatedThe macbook 2008 model is unable to detect iPod or iPad of 4th Generation.I am unable to upgrade the OS software and unable to install any new software. (.dmg)
Info:
MacBook, Mac OS X (10.6.5), Unable to recongise the ipod
I recently bought an SSD vertex 64gb for only 200$ cad. Unfortunately, I do not have enough space to install the Soundtrack Pro components on this drive. I recently bought too an eSata powered cable and a express card esata who came with it. The hard drive can't be detect on my macbook pro unibody late 2008 2,4" but runs. I install the silicon image drivers non-SL and adding over that the SL drivers.
[URL] In that case, I want to know how to uninstall those drivers from silicon image 3132? I thought about another thing if it really not work eventually. The dvd-drive bay could be remplaced by an enclosure 2.5" for my factory 250gb 5400rpm.
[URL]
Second question, Does this other hard drive will take a lot more power?
transfer my files from my WD external drive to my MBP but to no avail. I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
The Culprit of all this is when I install MacFue & NTFS-3G
I just purchased my new macbook pro and I wanted to know if it was possible to use the laptop as a router so that my PS3 could connect through it. I followed the steps someone else mentioned:
(1) Open System Preferences on your MacBook Pro, and open "Sharing"
(2) On the left column, click Internet Sharing and check the box
(3) Use the drop-down menu to select Ethernet in "Share your connection from..."
(4) Check the box next to Airport in the section "To computers using..."
(5) Close System Preferences and open the Airport menu from your Toolbar (top)
(6) Click "Create Network", add a name to your Computer-to-Computer network
(7) Leave the Channel as Automatic, add a password if you require (make sure your PS3 is compatible with your chosen level of security), click Ok.
(8) Connect an ethernet cable between your broadband modem and MacBook Pro
(9) Turn on your PS3 and perform your usual setup when connecting to a wireless network
I have an Ipod, and it did detect the new connection that was setup; however, my PS3 and my Windows Mobile phone did not detect it. Is there a reason for this? Do only Apple devices identify this connection?
^^ Basically says it. I just installed Leopard today and plugged my touch in for the first time since then. Itunes won't detect my iPod though. iPhoto tries to import pictures from it and it charges but iTunes won't detect it.
View 10 Replies View RelatedI have a MacBook Pro running OSX 10.7.2 and it recently stopped booting. Got the gray screen with the folder that has the question mark on it. I have attempted to use Command + R to do a Internet Recovery of the system, but once I get to the Mac OS X Lion screen to select where i want to install OSX, there are no hard drives listed.
So I figure, the hard drive (Hitachi 500GB that came with the Mac) is damaged or not functioning correctly. This doesn't seem to be the case because I can hook it up to a notebook SATA hard drive enclosure, connect it to my other MBP and read all the contents of the drive! This was good news, as i was able to copy off all important data, etc.
Using Disc utility, the partitions check out, and the drive appears to be functioning OK.
Verify and Repair volume “Macintosh HD”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Volume repair complete.Updating boot support partitions for the volume as required.
I have purchased a replacement hard drive and am waiting for it to arrive in the mail.
My question now is this:
Am I able to do some kind of time machine backup, make an image, or do some kind of target drive restore from this hard drive since it is accessible on my other computer?
I don't mind reloading the operating system on the original MBP, but would really like to avoid the process of setting up all the applications, settings, etc if this drive is in fact functional.
I've created a Snow Leopard boot disk using this method link. I created it on a 16GB CF Disk. I've tried it twice. First time I formatted the disk as eXfat with 1 partition. Next time I used Mac OS Extended for a 7Gig partition and fat32 for the rest.
Upon boot I get the normal install stuff like I do with the DVD, but then no hard disk shows up. I thought it was because of the eXfat which is why I tried again. I looked into the system profiler and I can see my seagate hard disk, but under disk utility it doesn't exist. My Sata DVD drive shows up though. If I boot off of the DVD I can see and install to my hard disk.
I'm trying to make a USB Disk because I'm planning on getting a SSD and I will be removing the Dvd drive.
This is a Mid 2009 Macbook.
I am trying to partition my current HardDrive so I can run a Macintosh on half of it. The other half will of coarse be windows. I've tried programs like BasiliskII and SoftMac, neither work.
I grabbed some spare 10.4 disks I had, and my computer refused to read them. So I got my hands on a different set of 10.4 install disks and my computer still refused to read them.
I am trying to do this because it's a project for my Computer Hardware class. I've spent way too much time on this without any progress.
I usually just turn off my monitor at night but for some reason, the HD constantly makes spinning noise even then the computer hasn't been used for hours ( i don't run time machine ).
Is there any way to tell what process is causing this stupid HD activity? My previous Dell machine was so much more quiet than this POS. I prefer not having to explicitly put the machine the sleep every time.
I ordered a second hard drive for my powermac g5.Its a 400 gig seagate drive.I power off my machine,unhooked everything and plugged in the drive.
I boot up and the drive isnt showing in disk utility.Is it something i did?
My intention is to partition an external HD in half allowing it to serve as a backup for a pc running windows xp, and the other half as a backup for a mac(10.5. I am using a Seagate external HD(new) that was initially partitioned on a windows xp computer.
The 1st half of the 1TB HD was formatted in NTFS format, and the second half was erased and (I thought) reformatted in HFS plus but when I attempt to use CCC(Carbon Copy) to copy the mac 1/2 of the hard drive, I get this message:
"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs."
I have read the recommendations that the external HD need to be partitioned with APM or GPT, but I cannot seem to get to that option now for the mac side of the external HD.
In the Disk Utility, the external HD shows both sections of the partitioned drive(the xp section and the leopard). I do not want to reformat the entire drive(both sections) if at all possible.
I just want the Mac side of the ext drive to be properly prepared for CCC, and the windows side to remain as is.
I am able to copy files on a pen drive but I am unable to copy files on a hard disk directly.
Info:
MacBook Pro, Mac OS X (10.7.3)
Okay. So I had an Imac G5 (white) running 10.4 This one crashed and I got a new iMac G5 (Silver). Since then I have removed the old hard drive. Today I connected it to a Serial ATA - USB Converter. It powers up and sounds to be working fine (hums, spinning) but my new computer says "Disk is unreadable". It gives me the option to format, but I want to recover my old files first.
Important: I also have a similar Lacie external drive that I hooked up the same way and it worked fine. I was able to take the files off of it.
My guess: I believe when the drive is connected, it is trying to start up the OS (this was the start up disc). It has that click sound like it's trying to make the chime and then spinning like it's working. Can you change the drive to a "Slave"? Or is my disc corrupted?
I'm using iMac 2011 model with OS Ver 10.9.5. The sharing and permissions option in the get info in External Hard disk shows "you can only read".
Info:
iMac, OS X Mavericks (10.9.5)
I'm trying to help a friend fix his MacBook (white plastic) which has the folder with the question mark issue. I figured I'd do a clean install of Leopard but when the installation disk boots, it says it cannot detect Tiger which is necessary for the upgrade. I tried erasing the partition, but it gives me an error and stops the operation.
View 3 Replies View RelatedI created an image of an external hard drive to back it up, then I checked it and it opened fine. I moved the file to another drive and initialized the original drive and dropped the dmg file back onto the drive. Now it won't open. I really need the files on that drive. Is there any way at all to open it if even for a short time to retrieve the files?
View 5 Replies View RelatedLast time when I was login my system, the password will not eccepted. So several time try to enter the correct password, even not eccepted but the messege came you cannot login at this time.So I reinstall my system in archive option after instalation.I restart my system but unfortunately my Hard Disk & Files are not apearing in desktop.
View 1 Replies View RelatedI recently bought two 2GB sticks of OWC 800 MHz ram for my Mac Pro.
My Mac Pro originally had two 1GB sticks, which worked fine, I just wanted more.
It seems that they don't work together. I've tried every possibly configuration. Is it the case that they just aren't going to work together because they are different sizes?
Right now, I have the two 2GB sticks in A1 and A2. And the stock 1GB sticks in B1 and B2. A1 and A2 gets detected, but B1 and B2 doesn't.
My pro only sees my Airport and does not detect other wireless networks even there are some around- my other macs detect 7 n all-- note I have win7 with bootcamp and does the same thing?
Info:
MacBook Pro, Mac OS X (10.6.8), my laptop and sisters Imac see 7
I have just upgraded to OS X 10.7.4. When I connect my camera to download photos it says that it dosn't detect a camera. Have i missed a step ?
Info:iMac, Mac OS X (10.7.4)
