I have a 2008 macbook pro with snow leopard installed. When i turned the computer on the computer boots up but my screen stays black. Sometimes when i try to restart the computer i don't even get a chime. When i do get a chime, i can share the screen and run the macbook from my imac. Is there a way to get my screen to turn on remotely from my imac?
View 8 RepliesComputer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies View RelatedMy computer screen goes black but computer is still working ( music playing, video playing etc.) later the screen saver comes back on in 5 to 10 minutes and I can see everything again. This can happen several times during a computer session, any ideas what the problem is?
Info:iMac (24-inch Early 2008), Mac OS X (10.6.8)
When I run the SMC 1.3 update, my computer just stops at a black screen, at which point I have to force shut down the computer and restart it. It then informs me that I need to run the update again.
View 1 Replies View Relatedmy computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
I was using my MacBook Pro , which I only bought a week ago , when the screen suddenly went black and the computer seemed to power down , when this happened it was on 40% battery , I plugged In the MagSafe it didn't seem to light but when I looked closely it was on but it was very dim and flashing green and orange . When I put my ear to the case I can hear a faint noise.
Info:
MacBook, OS X Mavericks (10.9)
I was BBMing while trying to plug in my headphones with my pheripherals, and I accidentally pushed it (not very hard) into the USB port. The tip of the headphone jack connected with the little connector ball at the bottom of the USB port. The screen went black and I instantly hit the power button on instinct, so I don't know if it shut off. Did I do something very bad, or is that normal? I'm not sure if that's even considered an electric shock or what.
View 3 Replies View RelatedEverytime I turn it on I get a black box asking to shut down or restart the mac. I have managed to get it to turn on to powersave and managed to update the software. Thought it might help but just made it worse - it won't boot up at all now past an apple symbol with a little swirly thingy underneath (I apologise now for my lack of intelligence when it comes to computers/knowledge/names of things!) The first time I managed to boot the computer up it came up with the grey screen and a little folder flashing between a face and a question mark which I assume meant it couldn't find anything but that appears to have gone away now. I bought this computer new from Apple about 2 - 3 years ago and no disks were provided with it.
View 3 Replies View RelatedWhen I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
I recently purchased a refurbished 24 inch imac from the noticed when the computer is idle (black screen), my wired mouse does not work. When I pull the cable out of the usb port on the imac, the computer screen comes on and then I reinsert the cable back into the usb port in the computer to use the wired mouse (wired mouse works fine after I reinsert the cable back into the usb port).Could this problem be associated with the wired mouse or with the usb ports on the imac?
View 2 Replies View RelatedI have a G5. It started whining loudly and now it has a black sceen. Can't find old discs to reboot.
View 8 Replies View RelatedMy macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
I have a 27 inch desktop. Upon turning the computer on within seconds the fan comes on. Then it goes to a high fan. Then it goes to a black screen. Then it shuts off. Then if you click the mouse it will come back on. This cycle repeats itself every 5 seconds. Only one time in the past month did it turn on normally and run for me.
Info:
iMac
Tried to restart didn't work. Light is on, but nothing makes noise or anyhting. Been charging it for hours so it has power. Tested the chord on my ther computer and it worked
Info:
MacBook
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
How do I change the iTunes screen display from 'white on black' to 'black on white'
Info:
24" iMac
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedSo I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedI have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
View 1 Replies View RelatedAs the headline says the right half of the screen turns black when watching video content in iTunes on full screen. I can see the whole picture when moving the mouse a little but as soon as the navigation bar disappears the right half of the picture disappears too. It does not matter what source it is. Both podcasts and movies work (or do not work) the same.Â
The problem doesn't occur for other player (VLC, XBMC etc.).Â
I have the latest OS (10.9.4) and iTunes (11.4). The computer is MBP 13-inch retina, late 2012 if it matters.Â
Info:
MacBook Pro (Retina, 13-inch, Late 2012), OS X Mavericks (10.9.4)
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
Info:
MacBook Pro, iOS 5.1
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
My macbook pro just has a black screen with a small coloured circle on the right of the screen. It is frozen and wont respond to turning it off or on. It is plugged into mains power.
Info:
MacBook Pro
When my MacBook Pro 13" i5 goes into screen saver mode, which is black, it won't return to normal mode. Tried all keys, trac pad, closing the lip and re-opening it, and it won't respond. The only thing that works is holding down power button for hard shutdown, then restarting it. It has happened 8 times in the last 2 weeks.
Info:
MacBook Pro, Mac OS X (10.7.2)
After an update(I think) I can no longer get into my computer. When turned on I get the apple logo then a grey screen that turns to black but the curser is active . Then there is no more progress to the startup screen
Info:
MacBook Pro, iOS 7.1.1
I have a mid-2010 MacBook Pro, which has been upgraded recently to Mavericks. My problem is that randomly (usually due to pressing a button or using the mouse) my computer will black out and restart. I was having these intermittent kernel panics earlier this year and took it to a repair shop that said it was not a hardware issue and clean-installed the OSX, but the problem has persisted. The only difference is that before it would just restart while now I get the gray "Your computer was restarted because of a problem" error screen.Â
Below is the log from the latest report:Â
Anonymous UUID:Â Â Â Â Â Â 7E9ECFC6-2275-1966-C858-56615F0EFD1FÂ Â
Thu Sep 11 08:33:35 2014
panic(cpu 1 caller 0xffffff7f839fef7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80e4392000 0x0a5480a2, D0, P3/4
"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
[code]...
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.4)
I was watching movies fine last month, and now when i put a dvd in it shows up black. at first, i thought it was because of the type of dvd, but then i realized something was wrong when i put in the movie that i just watched and it showed up blank. it does not have any scrathes on it and i have iDVD what do i do!!
Info:Mac OS X (10.6.8)
