MacBook Air :: Plugging Into Wrong Port - Computer Screen Goes Black
Dec 15, 2010
I was BBMing while trying to plug in my headphones with my pheripherals, and I accidentally pushed it (not very hard) into the USB port. The tip of the headphone jack connected with the little connector ball at the bottom of the USB port. The screen went black and I instantly hit the power button on instinct, so I don't know if it shut off. Did I do something very bad, or is that normal? I'm not sure if that's even considered an electric shock or what.
View 3 Replies
ADVERTISEMENT
Jun 30, 2012
I'm trying to plug my guitar into my MacBook Pro 13 inch mid 2012 model. It says the port can be used as an audio in as well as out but when I go to preferences, sound then try to look for the "Use audio for" tab it's not there. Although I probably will be buying a USB interface soon, I just want to know why this isn't working.
Info:
MacBook Pro (13-inch, Mid 2012)
View 11 Replies
View Related
Jun 27, 2014
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies
View Related
Jun 5, 2014
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
View 3 Replies
View Related
Jun 3, 2014
I was using my MacBook Pro , which I only bought a week ago , when the screen suddenly went black and the computer seemed to power down , when this happened it was on 40% battery , I plugged In the MagSafe it didn't seem to light but when I looked closely it was on but it was very dim and flashing green and orange . When I put my ear to the case I can hear a faint noise.
Info:
MacBook, OS X Mavericks (10.9)
View 2 Replies
View Related
Apr 29, 2012
When I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
View 3 Replies
View Related
Aug 26, 2014
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
View 3 Replies
View Related
May 16, 2010
I have a 2008 macbook pro with snow leopard installed. When i turned the computer on the computer boots up but my screen stays black. Sometimes when i try to restart the computer i don't even get a chime. When i do get a chime, i can share the screen and run the macbook from my imac. Is there a way to get my screen to turn on remotely from my imac?
View 8 Replies
View Related
Apr 16, 2012
My computer screen goes black but computer is still working ( music playing, video playing etc.) later the screen saver comes back on in 5 to 10 minutes and I can see everything again. This can happen several times during a computer session, any ideas what the problem is?
Info:iMac (24-inch Early 2008), Mac OS X (10.6.8)
View 2 Replies
View Related
Aug 3, 2009
When I run the SMC 1.3 update, my computer just stops at a black screen, at which point I have to force shut down the computer and restart it. It then informs me that I need to run the update again.
View 1 Replies
View Related
Feb 8, 2009
Everytime I turn it on I get a black box asking to shut down or restart the mac. I have managed to get it to turn on to powersave and managed to update the software. Thought it might help but just made it worse - it won't boot up at all now past an apple symbol with a little swirly thingy underneath (I apologise now for my lack of intelligence when it comes to computers/knowledge/names of things!) The first time I managed to boot the computer up it came up with the grey screen and a little folder flashing between a face and a question mark which I assume meant it couldn't find anything but that appears to have gone away now. I bought this computer new from Apple about 2 - 3 years ago and no disks were provided with it.
View 3 Replies
View Related
Jan 2, 2011
I recently purchased a refurbished 24 inch imac from the noticed when the computer is idle (black screen), my wired mouse does not work. When I pull the cable out of the usb port on the imac, the computer screen comes on and then I reinsert the cable back into the usb port in the computer to use the wired mouse (wired mouse works fine after I reinsert the cable back into the usb port).Could this problem be associated with the wired mouse or with the usb ports on the imac?
View 2 Replies
View Related
Apr 11, 2012
I have a G5. It started whining loudly and now it has a black sceen. Can't find old discs to reboot.
View 8 Replies
View Related
Jun 4, 2014
I have a 27 inch desktop. Upon turning the computer on within seconds the fan comes on. Then it goes to a high fan. Then it goes to a black screen. Then it shuts off. Then if you click the mouse it will come back on. This cycle repeats itself every 5 seconds. Only one time in the past month did it turn on normally and run for me.
Info:
iMac
View 1 Replies
View Related
Jun 26, 2014
my computer types the wrong letters
View 2 Replies
View Related
Jun 27, 2009
Is everyone else's icon in the finder actually the icon for the old alu mbp 15", rather than the icon for the unibody 13" mb (fa08)?
View 24 Replies
View Related
Mar 17, 2012
Tried to restart didn't work. Light is on, but nothing makes noise or anyhting. Been charging it for hours so it has power. Tested the chord on my ther computer and it worked
Info:
MacBook
View 1 Replies
View Related
Apr 4, 2012
My LED screen has gone wrong, it's like it is showing in negative.getting it back to normal.
Info:
Mac Pro (Mid 2010), iOS 5.1
View 1 Replies
View Related
Dec 14, 2008
My ibook was running really slow, so i decided to get some more memory. i'm no computer expert but i used to work in the IT dept and have replaced memory before (in pc's).
Anyway, i went to my local computer store, told the guy there what kind of computer i had. (ibook G4, 14-inch with a built-in memory and an empty slot). He looked it up on the system, figured out what i needed and i bought it. It was a Corsair 1GB DDR2 667mhz. He said it was exactly what i needed. I didn't question him.
Tonight, i go to install it, and it doesn't go in easily. I got it in though, and turned on my computer, and it wouldn't start. i took it out, and it started fine.
I went to some online forums about installing memory on my specific model and people were saying you really need to force it in there, more than you think would even be safe, but it takes a lot of force to get it in, so i thought maybe it didn't work the first time because it wasn't in all the way. i kept trying, and i got it in further, thinking i did it. i went to turn on the computer, dead.
So, i took out the memory, and now my computer still won't start. NOTHING.
I went back to the store, told them what happened, and i spoke to a different salesman than yesterday, and when this guy looked at what i bought, he said it was definitely not the correct one.
He said DDR2 is definitely not compatible with the older iBook. He also said that he looked on his system to find out what type i really need, but the system wouldn't show my model (because its a few years old). Pretty much, he said that the other employee messed up because the computer wouldn't even show him what i would need.
But what i would like to know is what's wrong with my computer exactly? did the mother board fry? did i lose everything? do i need to send it into mac for repair? how screwed am i? and also, is the store responsible for this at all?
The sad part to this story is that in early august of this year, this laptop's battery stopped working, and it was a problem with the power supply. I sent it off to mac and they fixed it, but when it was returned, it wasn't turning on. i sent it back again and they said the motherboard had to be replaced. luckily that happened a month before my extended warranty expired, but this time, i don't have a warranty anymore.
Any insight on my problem? Please someone, cheer me up. Tell me there is something i can do to save my computer and that my motherboard isnt fried again.
Can putting the wrong memory in your computer completely ruin it?
View 6 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Mar 12, 2012
I have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist. If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode.  I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it. Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?Â
2009 unibody intel macbook pro
running 10.6.8
3.06 ghz 8gb ram
View 6 Replies
View Related
Sep 11, 2014
I have a mid-2010 MacBook Pro, which has been upgraded recently to Mavericks. My problem is that randomly (usually due to pressing a button or using the mouse) my computer will black out and restart. I was having these intermittent kernel panics earlier this year and took it to a repair shop that said it was not a hardware issue and clean-installed the OSX, but the problem has persisted. The only difference is that before it would just restart while now I get the gray "Your computer was restarted because of a problem" error screen.Â
Below is the log from the latest report:Â
Anonymous UUID:Â Â Â Â Â Â 7E9ECFC6-2275-1966-C858-56615F0EFD1FÂ Â
Thu Sep 11 08:33:35 2014
panic(cpu 1 caller 0xffffff7f839fef7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80e4392000 0x0a5480a2, D0, P3/4
"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
[code]...
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.4)
View 3 Replies
View Related
Sep 16, 2009
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies
View Related
Jan 4, 2010
I have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
View 6 Replies
View Related
May 5, 2012
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
Info:
MacBook Pro, iOS 5.1
View 2 Replies
View Related
Mar 27, 2012
My macbook pro just has a black screen with a small coloured circle on the right of the screen. It is frozen and wont respond to turning it off or on. It is plugged into mains power.
Info:
MacBook Pro
View 1 Replies
View Related
Jun 2, 2012
When my MacBook Pro 13" i5 goes into screen saver mode, which is black, it won't return to normal mode. Tried all keys, trac pad, closing the lip and re-opening it, and it won't respond. The only thing that works is holding down power button for hard shutdown, then restarting it. It has happened 8 times in the last 2 weeks.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 5 Replies
View Related
Jun 3, 2014
After an update(I think) I can no longer get into my computer. When turned on I get the apple logo then a grey screen that turns to black but the curser is active . Then there is no more progress to the startup screen
Info:
MacBook Pro, iOS 7.1.1
View 2 Replies
View Related
Jun 13, 2012
I hear the initial "turning on" sound, buy after that there is nothing.What is wrong and how can I fix it?
View 11 Replies
View Related
