OS X V10.5 Leopard :: IMac Screen Went Black - Starts Up With Black Display
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
ADVERTISEMENT
Dec 21, 2010
For the past few weeks it has been going to a black screen when trying to wake it up from sleep. Either I've put it through too much work lately editing all these photos and its really tired. So, often it wakes up normally and functions fine, well, not really. It is seemingly very slow. It requires a lot of time (more than before) to open up a program or it gives me the "spinning wheel of death" when trying to go to a different page on the internet or open up a folder on my desktop. Amongst other things that require it to think. So It's just a lot slower in general than before.
View 3 Replies
View Related
Jun 2, 2014
Black screen on my iMac, how can I get it back to log in screen?
Info:
iMac
View 1 Replies
View Related
Nov 13, 2009
After installing windows 7 on my new iMac the system wants to reboot, so i let it. When it does, i press down the option key and choose it to start in Widows, but now the screen turns black, and windows never starts. i dont know what to do.
View 1 Replies
View Related
Feb 17, 2012
Mac book pro starts up but screen stays black. I have tried taking the battery out, waiting over night it still is black
Info:
MacBook Pro, iOS 5.0.1
View 2 Replies
View Related
Apr 26, 2012
I have a MacBook Pro (13'', Early 2011) & iMac (21.5", Mid 2011) using a Thunderbolt Cable to Target Display. Everything was working find and I could Command F2 to Target Display as expected.However, about a week about this stopped working. Now when I try to Target Display the iMac goes to a Black screen (like it's switching to Target Display) and the MacBook Pro does nothing. The iMac will be at the Black screen until I Command F2 again (or disconnect the Thunderbolt Cable), then the iMac goes back to the normal display. I have tried another Thunderbolt cable with no luck. I have perform all software updates on both machines (now both running 10.7.3) and fixed Disk Permissions. I have also found that restarting my MacBook Pro allows this to function as excepected (Command F2, Blue Flashing Screen, Target Display on the iMac). However, this is not an ideal situation since having to restart my computer is time consuming. Â
View 8 Replies
View Related
Apr 30, 2012
I have a 2007 or so Macbook Pro that when I turn it on, it "dings" and sounds like it's starting up but then the screen is just BLACK. This happened before, about a year ago, so I don't want to fix it as I think it will just keep happening. My question is, can I connect a dual-USB to it and my iMac to transfer files from it? Or how can I get my files off my MBPro to my iMac without spending $$$ to get a pro to take out the hard drive and etc.?
Info:
MacBook Pro
View 1 Replies
View Related
May 10, 2012
My 2007 MacBook is starting up and making all the right noises but the screen stays black - looking on different forums it seems likely it is either the back light or the inverter that need fixing but in the meantime there is some things on there I need - I have an IMac as well and I have tried to connect the too so that I can view the macbook on the imac - I used a firewire cable and held down the t key on the macbook (but obviously couldn't see if it had worked) I then turned on the Imac and held the option key down but it only give me the IMac HD to start from and not the Macbook
View 2 Replies
View Related
Jun 27, 2014
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies
View Related
Jul 22, 2008
So for the first time in over a year since I purchased it, my iMac crashed twice.The first time was this morning, i went to do something and the screen went black, and my secondary display got black and white lines. I had to restart. And the boot screen with the apple logo hung around for a while.
Then, later on the screen went whacky after trying to wake it from sleep (not full sleep just display sleep) and had a bunch of moving lines and then I couldn't see anything. So luckily I got a picture. After restart, it seems fine.I'll call apple care in the morning, but thought i'd try my luck here.
View 39 Replies
View Related
Dec 6, 2014
My MacBook is making the startup sound but goes straight to a black/dark grey screen. In other words you can see the screen switching on but it's blank. It's in charge mode, has no other external peripherals attached and it's updated to most recent OSX Yosemite.
I only purchased it in May of this year (refurbished). I have tried booting in to safe mode but again the screen remains the same. Â
View 6 Replies
View Related
Apr 15, 2010
I've got a 2007 Macbook Pro. It's on its second graphics card (8600M GT), the first one failed on me a year ago. OS X 10.5.7, all firmware updates installed.
I think I have a new graphics card issue, but I can't prove it. In Front Row, after 10-20 minutes, often parts of the screen will start going black. Then it freezes. Sound works fine. It doesn't look like the same kind of wild distortion that I got when my GPU failed the first time, though, it just looks like things have been rendered incorrectly.
When Front Row finally quits, I've had black and white bars across my menu bar a couple of times. Once the computer then totally locked up and I had to reboot.
In Windows XP in boot camp, things are worse. I only use boot camp for games, since they use a lot of graphical power, it made sense that the problems happen there more often. After 15-20 minutes, the screen will start stuttering, then the keyboard/mouse will stop responding. The sound will hiccup a few times too. That lasts about 10 seconds, then everything returns to normal for a while (as little as 10 seconds, or as long as 5 minutes.)
The Apple Hardware Test (short and extended) shows no trouble. Techtool Pro shows no trouble. I ran the very thorough memtest86+, and it showed no memory trouble.
Can anybody give me any tips on definitively diagnosing this problem? Is there any kind of really intensive hardware test I can get (a live CD maybe)?
Second question, has anybody heard of Apple replacing a laptop that has had many faults with a brand new unit?
View 4 Replies
View Related
May 7, 2008
Middle of last month I bought a 20" IMac. Everything was fine up until about 1 week ago when the screen went black. I clicked on the mouse button several times only to have a password box pop-up. After filling in the response, all was fine.
Next, same scenario but the password box didn't appear any more. The only way to get the screen back was by a forced restart.
I turned off the screen saver, set the 2 controls in energy server to off, unchecked the box at the bottom left & put "auto login" to to on the Accounts window.
Problem continued.
Next move was to zap the pram, this was 2 days ago. The screen didn't go black but often asked for my pw. It's now back to its beginning phase which is a forced restart !!
I was told that it was due to Leopard 10.5.2 & am considering going back to 10.5.1
View 1 Replies
View Related
Jul 19, 2010
My Macbook is brand new! (Barely 4 months old) Just recently my laptop will flash a black screen. It starts from the bottom and quickly flashes up the screen higher and higher each flash! i have read on some other pages it is a bad inverter on the inner core of the Macbook. Other than that I do not know what to do!
View 3 Replies
View Related
Jun 21, 2012
Every few weeks my iMac will suddenly freeze, the screen going black or white or pink etc. The only way I can get the computer back is to hold down the power button to force a shutdown. Then after a restart everything is OK for a few more weeks. Usually it occurs when I am on the internet. I click on something and suddenly the computer is frozen. I am on OS X 10.6.8 and usually use Safari. Ironically when I opened this forum 5 minutes ago there was a similar sounding problem at the top of the list!
Info:
iMac, Mac OS X (10.6.8), FCE 4 + FCS 3 . . . Little Knowledge, Many Opinions.
View 4 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
Sep 28, 2010
I have a Mac Pro (Early 2008) running on 10.5.8 OSX with apple 20" display and 16G RAM.
Initially started with my MACPRO not waking up from sleep and has to force the shut down with power button. Finally realised it was due to my Epson scanner connected via USB...
The main issues now is with the display, black screen on startup. I can still control the volume and disk eject/close, just no display. Force shut down with power button numerous time but futile. Finally solved it with SMC reset.
it becomes an on and off issues... and continuously I solved it with SMC reset.... sometimes needed 2 or 3 resets to get it to work,and finally for the past few days... SMC reset can't solve it either... no display on startup, and same thing I can control the volume and disk eject/close. Have tried my monitor on other mac and it worked fine.
Now this is strange. if I let the mac cool off totally,after a SMC reset. the display will comes up fine...
View 4 Replies
View Related
Dec 2, 2009
I was browsing the internet, not doing anything major, put the computer to sleep, came back 10 minutes later... black screen. I messed with it for an hour or so and determined that the video card went bad (I'm guessing. It's a mid 2007 macbook pro with the nvidia geforce 8600m. My secondary monitor remains black as well). In the midst of totally freaking out, I decided to activate the voiceover utility, enable screen sharing (after figuring out a slew of keyboard commands I didn't know about), and logged in from my girlfriends computer.
I immediately closed all the windows and applications that I had inadvertently opened during the blind wtf session, and opened up system profiler to see if it is recognizing a video card. Well, it is! It's listing the video card as a GMA x3100! Is there a secondary card in there? Cause if there is, it's not working either. Or is that just a default they would put in if it doesn't recognize a video card? Doesn't seem likely. Or, because I'm using screen sharing, is it picking up my girlfriends card? It's not, because she's using a GMA 950. Maybe it's splitting the difference?
View 1 Replies
View Related
Jan 15, 2010
Ive got a hd cinema display 23 inch wich stopped working last week.The power led is on, not giving a code or anything.I'm not affraid to open it, it is allready. But i dont see obvious black smoked parts
When I shine on the screen with a flashlight or something, I dont see images. so I dont think its the inverter.Was hoping someone here might know more?Perhaps logic board? not sure what that does btw
View 2 Replies
View Related
Jul 8, 2010
I have a core i7 MBP with the high res display, and when the display is showing black, a horizontal green line appears on the screen. It is only visible when the screen is showing black or another very very dark color, and the line is not visible with the screen off. It isnt something on the screen, as rubbing it does not affect it at all. I cannot post a screenshot of it, because it does not appear in the screenshot (it does on my screen, because the line is there physically, but on other monitors it is not visible).
View 3 Replies
View Related
Sep 5, 2010
So I've got my MBP that I've had for about 4 months, the thing is. It just recently started to have screen flickering issues. I'll be sitting doing w/e as usual and all of a sudden the display goes dark, almost black, for a second, then comes back up again. I have yet to find any trend in when this is happening, but it is definitely happening on battery as well as plugged in, but it seems to be getting worse.any one have any idea what this could be, something I can fix on my own, or should I take it in?
View 7 Replies
View Related
May 20, 2012
My images on my screen are like in black and white.
Info:
MacBook Pro
View 1 Replies
View Related
Dec 8, 2008
Today, I bought a vga adapter for my unibody macbook and it is not working. I hooked it on a 22 inch Samsung 225MW screen and it the screen shows a message "check your cable (PC)".
View 7 Replies
View Related
May 11, 2012
I have a early 2011 MacBook Pro 13" running the latest version of Lion. I have been using my MacBook with an external monitor since I brought it in 2011 and have had no problems with connecting it to my external monitor. Connected via mini display port DVI adapter and a DVI cable to a Philips monitor.
Two days ago when I plugged the MacBook back in to the monitor I connected and but now only displays a black screen, I can move the mouse off the MacBook screen and over to the external monitor and back but it is not displayed on the monitor. I have tried connecting other devices to the monitor and they work fine.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 3 Replies
View Related
Aug 23, 2014
my macbook air 13 display only black screen and pointer when wake up from sleep. its not frequently happen. to become normal it take 10-15 sec, is it hardware problem or software problem?
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Sep 5, 2014
Macbook pro 2014 only had it for about 2 months but recently about three weeks ago the display has been flicking to a black screen but has gradually been increasing and it now happens every two minutes - just randomly goes black for about 5 or 10 seconds and sometimes goes back to home screen but sometimes goes to log in screen, It interferes with me trying to do my work when this happens so frequently
Info:
MacBook Air, iOS 4.3.3, Transferring from Windows XP
View 2 Replies
View Related
Jan 28, 2010
I've got a 2001 Blue Dalmation that has 100 GB HD and is running OSX (10.4).The display is really fading and has a one inch black border around the edges. Is the display toast, and/or is it cost-effective to replace it?
View 1 Replies
View Related
Aug 17, 2009
I have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
View 6 Replies
View Related
May 7, 2010
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies
View Related
Apr 9, 2012
My Mac Book Pro just stopped accepting commands, the screen is freezing on a black screen and the keys have no bearing on the situation. The only way I can get it to stop is pull the battery out. It has been acting funny lately.
Info:
MacBook Pro (17-inch Early 2008), Mac OS X (10.5.6), final cut express
View 4 Replies
View Related
