my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedMacbook is charged up. Sounds like it's turning on but no tone. Screen stays black.
Info:
MacBook, Mac OS X (10.7.3)
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My macbook pro late 2009Â (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going...
Info:
MacBook Pro, Mac OS X (10.6.7)
My screen is black but my laptop is not off.. and its not that only the screen is black, my mac on sleep (i think)...When I turn my mac on, it does turn on.. The starting screen comes out.. but the moment the desktop opens, the screen goes black. And if I try to wake my mac up by pressing any key, the mouse shows for like three seconds(on the black screen, not my desktop). So that means that my mac is not totally off, it's just that the screen is black. But once in a while, when I press any button, my desktop shows for five seconds and the screen turns black again. I had yesterday was that the finder was keep restarting. I was still able to go on all the apps except that I could not open any files on my desktop.
View 1 Replies View Relatedmy MBP is really screwing up these days. Basically the best way I can describe it is that randomly once in awhile (no matter what I'm doing, usually surfing the net) the screen flickers a few times, then most of it turns black (except usually for a small part on top that stays on whatever it was displaying before). The section between the part that stayed the same and the bottom is sort of "multicolored".
The computer does not respond to anything except holding the power button down for 5 seconds until it shuts off. If I try to adjust brightness or sound level, nothing happens. Anyway, I took it in to apple and they claimed it was the motherboard, so they replaced it. But today I had the problem again! What else could it even be? Any chance its the RAM/screen/hard drive?
Anyone else noticing their new macbook air freezing randomly and the screen just turns completely black? The back light is still on but nothing is on the screen.
None of the buttons work, can't force quit anything, i have to hold power button to turn it off then back on.
It has happened to me twice already, first time when i was installing the adobe suite, second time is when I was working on a school assignment with a simulation app (not cpu or memory intensive AT ALL).
It was just an accidental liquid spill, but however my macbook pro has been acting up before all this mishap with the graphics. I thought is was just nothing so I didn't care to bring it to an apple store but when I had to bring it and check it out using the Nvidia video test it presumed a failed video card. The genuius said it will take 2 weeks to be fix until several days later I recieved a call saying it can not be fix due to a foreseen amount of liquid damage. I've spilt other liquid items but wiped it off the keyboard quickly and it still worked. I'm using my MBP right now with an external monitor, it still works fine but with the issue of the screen being pitch black.
Info:
MacBook Pro
My MAC powerbook was working fine yesterday! I shut it down last night and when I tried to boot it up this morning I get: the booting "sound" and the grey screen after which the screen turns to black and in the top left-hand corner
View 3 Replies View Relatedimac turns on but screen stays black ? i can hear it operating ...
Info:
imac 20" and macbook 13", Mac OS X (10.5.1)
I went to the Genius bar and they told me to Control, Option, P, R on a reboot to restore the settings, but with a wireless KeyBoard it does not work. I installed my standard PC keyboard, but am not sure what keys renase the display back to factory settings.
Info:
Mac mini
I am trying to fix a friends macbook pro. When I turn it on the screen shows the apple and the spiral underneath it spinning like it should then when it stalls for .2 seconds it goes to a white screen then there is vertical purple lines in groups across the screen. So the screen is white/purple. Then it fades to just white and I cant do anything.
I hooked up my monitor with a DVI cable to see if it was the motherboard that was possibly bad but the monitor works just fine with the cable. I can use the computer with the laptop keyboard/mouse and it works just fine. The laptop screen just stays blank the whole time. I uploaded a vid to utube for it. If anybody has any ideas for me please help. I dont know if this is a monitor problem or the inverter or the motherboard, possibly some other piece of hardware?
Here is the link to the video: http://www.youtube.com/watch?v=1JBFv-GTBmY
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedAperture 3.5.1 on iMac11,3 (Core i7, 2.93GHz, 16GB RAM) and OS X 10.9.4 (13E28)Â
Son's Eagle Project. Set up GroPro to snap a pic every 10 seconds. Now have 3,000+ photos in Aperture, in slideshow with most running at 1/10th second. Added text annotations.Â
In Aperture - plays perfectly.Â
Once exported - 75% through the video, screen goes black EXCEPT that the annotations I've made are retained - so occasionally a timestamp or comment appears on an otherwise black screen.Â
I've tried multiple export formats, no difference. Am now resorting to inserting timestamp slides between pictures to see if somehow there is a corrupted image that is causing the video export to fail.Â
Have replicated problem after a reboot with nothing of substance other Aperture running.Â
Info:
iMac, OS X Mavericks (10.9.4)
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies View RelatedWhile working on the computer, sometimes the screen will turn gray (from top to bottom) and a message will appear saying the computer must be restarted.So far the local Apple store has not been able to find the problem. The last solution the store tried was to replace the Airport Card, but that didn't work. Computer was purchased in December 2011.
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.2)
So I've got a powerbook G4, thats 8 days past its warranty. Conveniently, it now won't turn on. It won't wont boot from CD. If I turn it on, I get a gray screen that usually just turns my computer back off, if thats not the case I get a screen that shows the finder icon and a question mark and then turns off.
All it will do is boot into open firmware mode. Currently the install disc is inside of it and I've tried booting the cd using "cd:, bxi" and "dir hd", and it can't open both. Does anyone know how to wipe the HD, and start the installer using firmware? Otherwise, I think I'll have to take out the harddrive and plug it into an external case and then wipe it.
I was using my MacBook Pro , which I only bought a week ago , when the screen suddenly went black and the computer seemed to power down , when this happened it was on 40% battery , I plugged In the MagSafe it didn't seem to light but when I looked closely it was on but it was very dim and flashing green and orange . When I put my ear to the case I can hear a faint noise.
Info:
MacBook, OS X Mavericks (10.9)
When waking from "sleep" the screen appears normal but, the pointer leaves a trail of grey as it moves and the whole screen will turn grey if I keep moving the pointer. The computer is effectively dead. Have to shut down by using power off for six seconds and then re-starting. I know little about computers!
Info:
MacBook Pro, Mac OS X (10.7.3)
I was BBMing while trying to plug in my headphones with my pheripherals, and I accidentally pushed it (not very hard) into the USB port. The tip of the headphone jack connected with the little connector ball at the bottom of the USB port. The screen went black and I instantly hit the power button on instinct, so I don't know if it shut off. Did I do something very bad, or is that normal? I'm not sure if that's even considered an electric shock or what.
View 3 Replies View RelatedWhen I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
I have a 2008 macbook pro with snow leopard installed. When i turned the computer on the computer boots up but my screen stays black. Sometimes when i try to restart the computer i don't even get a chime. When i do get a chime, i can share the screen and run the macbook from my imac. Is there a way to get my screen to turn on remotely from my imac?
View 8 Replies View RelatedDisk Utility in OS X gave me a Invalid key length after checking Catalog file, so I restarted to OS X Install DVD. It did the same thing on the OS X Install DVD. I went to Startup Disk, changed it back to the Mac OS X on Macintosh HD option - so I could go in and back my stuff up. It just goes to apple logo, does the spin thing at the bottom, and goes black. I can't even boot from DVD anymore.
View 1 Replies View RelatedMy computer screen goes black but computer is still working ( music playing, video playing etc.) later the screen saver comes back on in 5 to 10 minutes and I can see everything again. This can happen several times during a computer session, any ideas what the problem is?
Info:iMac (24-inch Early 2008), Mac OS X (10.6.8)
Macbook Air 13", Early 2014, 1.7 Ghz Core i7
120 SSD, 8GB Ram, OS X 10.9.4
External Monitor Compaq W185q Â
I'm using an external Monitor (Compaq W185q) and everything's ok until I open certain webs, this websites have banners on both sides mostly, so I think that's important to tell. After couple seconds on those sites, the monitor starts flickering and then it turns black, completely. To make it work, I launch Mission Control and it starts working again, I drag the safari window back to my MBA's monitor, and problem solved. Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
When I run the SMC 1.3 update, my computer just stops at a black screen, at which point I have to force shut down the computer and restart it. It then informs me that I need to run the update again.
View 1 Replies View RelatedEverytime I turn it on I get a black box asking to shut down or restart the mac. I have managed to get it to turn on to powersave and managed to update the software. Thought it might help but just made it worse - it won't boot up at all now past an apple symbol with a little swirly thingy underneath (I apologise now for my lack of intelligence when it comes to computers/knowledge/names of things!) The first time I managed to boot the computer up it came up with the grey screen and a little folder flashing between a face and a question mark which I assume meant it couldn't find anything but that appears to have gone away now. I bought this computer new from Apple about 2 - 3 years ago and no disks were provided with it.
View 3 Replies View RelatedI recently purchased a refurbished 24 inch imac from the noticed when the computer is idle (black screen), my wired mouse does not work. When I pull the cable out of the usb port on the imac, the computer screen comes on and then I reinsert the cable back into the usb port in the computer to use the wired mouse (wired mouse works fine after I reinsert the cable back into the usb port).Could this problem be associated with the wired mouse or with the usb ports on the imac?
View 2 Replies View Related