OS X V10.7 Lion :: Macbook Pro Screen Remains Black After Opening Computer
Apr 29, 2012
When I open my macbook, the screen remains black (as though it's in sleep mode). Adjusting the brightness always fixes this problem, but this is a temporary fix. The brightness is not at zero when I adjust it after opening, often I need to dim the screen to reactivate it.
This problem is not: related to *clamshell mode*related to unintentionally dimming the screen. related to any of the settings in the Energy Saving panel in system preferences
Extra info: The computer seems as though it doesn't actually enter sleep mode when I close the computer.I don't think there are any processes running that would prevent sleep mode. I really just want the computer to go to sleep properly when I close the screen and more importantly, that it wake-up when opened, or at least when a button is pushed aside from the brightness buttons.
Info:MacBookPro, Mac OS X (10.7.3)
View 3 Replies
ADVERTISEMENT
Jun 26, 2012
I slept my MacBook Pro last night and can't wake it? I have rebooted and no bing sound is made. The screen remains black. The volumn keys blip. It is as if it is still locked in sleep mode!
Info:
MacBook Pro, Mac OS X (10.5.4)
View 5 Replies
View Related
Jan 2, 2010
I have a problem: when I restart my Early 2008 MacBook Pro there is no "chime" and the screen remains black. The keyboard doesn't light up or respond to any input, and worse still, the "lid button" light on the front of the notebook remains illuminated, it doesn't blink, it just stays on, shining in my face. I loaded a CD into the optical drive to see if I could use the keyboard to eject it, but this test failed. Now, when I turn on my MBP, I hear the optical drive spinning and the quiet whirr of the fan inside.
I looked on Apple's support website about what to do when a Mac refuses to boot. I tried all of the methods they listed, but since my Mac doesn't respond to keyboard input, all of the techniques failed. Having exhausted everything I could think of, I decided to post here hoping someone could suggest something. I was just on the verge of completing my portfolio website and I would like to salvage my data at least.
View 12 Replies
View Related
Apr 30, 2007
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
View 1 Replies
View Related
Dec 2, 2009
I was browsing the internet, not doing anything major, put the computer to sleep, came back 10 minutes later... black screen. I messed with it for an hour or so and determined that the video card went bad (I'm guessing. It's a mid 2007 macbook pro with the nvidia geforce 8600m. My secondary monitor remains black as well). In the midst of totally freaking out, I decided to activate the voiceover utility, enable screen sharing (after figuring out a slew of keyboard commands I didn't know about), and logged in from my girlfriends computer.
I immediately closed all the windows and applications that I had inadvertently opened during the blind wtf session, and opened up system profiler to see if it is recognizing a video card. Well, it is! It's listing the video card as a GMA x3100! Is there a secondary card in there? Cause if there is, it's not working either. Or is that just a default they would put in if it doesn't recognize a video card? Doesn't seem likely. Or, because I'm using screen sharing, is it picking up my girlfriends card? It's not, because she's using a GMA 950. Maybe it's splitting the difference?
View 1 Replies
View Related
Jun 4, 2012
imac a1225 shimes but screen remains black... what can I do?
Info:
iMac, Mac OS X (10.7.4)
View 5 Replies
View Related
Jun 28, 2012
I have a 2009-2010 27inch iMac with OSX and software fully updated.My Mac started shutting down or going into deep sleep when left on.I've tried rebooting, power long hold, checking cords etc.I've attempted the 5 second hold after disconnecting the power cord, plugging back in and start no luck.I hear a very small click inside when I long hold, sometimes a very faint spinning sound but nothing else.The fan came on once after a start attempt but nothing else happened. I can't seem to safe start because the screen remains black.
Info:
iMac, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 22, 2014
I'm trying to connect my rMBP13 (OS X 10.9.3) received a couple of weeks ago to my desk display (LG Flatron W2486L) through apple's DVI-mini display port adapter.
Here is the results:
The MBP freezes a couple of seconds (I guess normal) after plugging in the mini display connector in one of the thunderbolt ports, but nothing happen on the external display (no signal).
The MBP sees the display: from "system preferences>displays" I see the MBP sees the external display and recognises the model "W2486"; but it seems to me that the display doesn't see the MBP...
I've tried to restart the MBP, but with the same result.
(I've ben using the display through the DVI port with my old PC, so it works).
View 1 Replies
View Related
Jun 27, 2014
Computer starts (keyboard lit, music plays, caps lock light on), but no screen. I need to open and close 2 - 30 times before the screen will turn on. Once on, the computer works perfectly. I've tried PRAM and safemode reset.
View 5 Replies
View Related
May 2, 2009
My wife is having an issue with her Macbook. The screen works great, when it comes on. However, 80% of the time, when she opens the laptop, she has to jiggle the screen back and forth to get it to come on. Sometimes it takes several minutes.
Any idea what that could be and what the solution would be? Could it just be a loose connection somewhere?
View 3 Replies
View Related
Jun 5, 2014
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
View 3 Replies
View Related
Jun 25, 2014
My 2008 Mac Pro display remains black after start up. It is plugged in properly and the light comes on, but the screen stays black. It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working. Today the display has remained black every time I've tried to start up.
View 3 Replies
View Related
Jun 3, 2014
I was using my MacBook Pro , which I only bought a week ago , when the screen suddenly went black and the computer seemed to power down , when this happened it was on 40% battery , I plugged In the MagSafe it didn't seem to light but when I looked closely it was on but it was very dim and flashing green and orange . When I put my ear to the case I can hear a faint noise.
Info:
MacBook, OS X Mavericks (10.9)
View 2 Replies
View Related
Dec 15, 2010
I was BBMing while trying to plug in my headphones with my pheripherals, and I accidentally pushed it (not very hard) into the USB port. The tip of the headphone jack connected with the little connector ball at the bottom of the USB port. The screen went black and I instantly hit the power button on instinct, so I don't know if it shut off. Did I do something very bad, or is that normal? I'm not sure if that's even considered an electric shock or what.
View 3 Replies
View Related
Aug 26, 2014
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
View 3 Replies
View Related
May 10, 2010
After moving I setup the Mini, but got nothing from the monitor. Reset PRAM & PMU, nothing. CPU chimes, etc.work, but the only thing I get from the monitor is a yellow square with a brief message indicating there's no signal.
It's a Mini, 2 MB RAM, Core 2, OSX10.5.x, it's less than a year old. The CPU appears to be OK. Monitor is getting power.
View 5 Replies
View Related
May 16, 2010
I have a 2008 macbook pro with snow leopard installed. When i turned the computer on the computer boots up but my screen stays black. Sometimes when i try to restart the computer i don't even get a chime. When i do get a chime, i can share the screen and run the macbook from my imac. Is there a way to get my screen to turn on remotely from my imac?
View 8 Replies
View Related
Apr 16, 2012
My computer screen goes black but computer is still working ( music playing, video playing etc.) later the screen saver comes back on in 5 to 10 minutes and I can see everything again. This can happen several times during a computer session, any ideas what the problem is?
Info:iMac (24-inch Early 2008), Mac OS X (10.6.8)
View 2 Replies
View Related
Nov 5, 2010
I have a new macbook air 13'' 2010.I'm using windows through bootcamp.hen I close the lid the screen keeps on.
View 20 Replies
View Related
Aug 3, 2009
When I run the SMC 1.3 update, my computer just stops at a black screen, at which point I have to force shut down the computer and restart it. It then informs me that I need to run the update again.
View 1 Replies
View Related
Dec 9, 2014
I bought last year (18 month ago) my MacBook Air. Suddenly it froze and after restarting the screen remains "off". After connecting an external screen I can go to the first opening screen but the cursor won’t move. I tried to use the “Command,” “Option” and “Esc” keys on the keyboard at the same time to bring up the “Force Quit Applications” window but it doesn't work. After restarting I'm back at the same screen, still frozen.
Info:
MacBook Air
View 1 Replies
View Related
Jul 18, 2010
This morning, I synced my iPod with my MacBook and upon completion and permission to disconnect the device, I pulled out the USB cord. At that point the computer instantly turned itself off, and when I hit the power button, I could hear the system trying to start up, but the screen remained black and the sleep light glowed continuously. I unplugged the charger, took out the battery and put it back in, and tried all the troubleshooting tips under the Apple Support guide with no success. I also discovered that when I closed the laptop while it was "on," it would seem to boot up a little more before returning to the black screen. I left it alone for a few hours, and when I tried again to turn it on, it booted up normally and as I was searching for updates, it shut down again as it had earlier.
Does anyone have anything for me to try? I don't want to have to take it into a shop because I can just barely afford to, but I need this computer! Any suggestions would be greatly appreciated :-)
View 7 Replies
View Related
Feb 8, 2009
Everytime I turn it on I get a black box asking to shut down or restart the mac. I have managed to get it to turn on to powersave and managed to update the software. Thought it might help but just made it worse - it won't boot up at all now past an apple symbol with a little swirly thingy underneath (I apologise now for my lack of intelligence when it comes to computers/knowledge/names of things!) The first time I managed to boot the computer up it came up with the grey screen and a little folder flashing between a face and a question mark which I assume meant it couldn't find anything but that appears to have gone away now. I bought this computer new from Apple about 2 - 3 years ago and no disks were provided with it.
View 3 Replies
View Related
Jan 2, 2011
I recently purchased a refurbished 24 inch imac from the noticed when the computer is idle (black screen), my wired mouse does not work. When I pull the cable out of the usb port on the imac, the computer screen comes on and then I reinsert the cable back into the usb port in the computer to use the wired mouse (wired mouse works fine after I reinsert the cable back into the usb port).Could this problem be associated with the wired mouse or with the usb ports on the imac?
View 2 Replies
View Related
Apr 11, 2012
I have a G5. It started whining loudly and now it has a black sceen. Can't find old discs to reboot.
View 8 Replies
View Related
Jun 4, 2014
I have a 27 inch desktop. Upon turning the computer on within seconds the fan comes on. Then it goes to a high fan. Then it goes to a black screen. Then it shuts off. Then if you click the mouse it will come back on. This cycle repeats itself every 5 seconds. Only one time in the past month did it turn on normally and run for me.
Info:
iMac
View 1 Replies
View Related
Jul 6, 2012
I just got a MacBook Air and transferred all my data from my old Macbook Pro last week. My microsoft office will not open. It opens the M.O. set-up assistant and I run through the steps and check for new updates, install the updates, and then it doesn't open the program. I try to click on the program again, and it runs me through the set-up assistant and updates everytime.
Info:
MacBook Air (13-inch, Mid 2012), Mac OS X (10.7.4)
View 3 Replies
View Related
Apr 1, 2012
I read early discussion posts on this topic and thought by now Apple would have corrected this poblem but apparently not. I updgraded my MacBook Pro last night to Lion and since last evening I have had 5 black screen (failures) and had to power off and reboot. Is there a known correction or update to this problem? It is extremely disappointing as I need my Mac for my business and cannot afford to send it to a depot for a five day repair.
This same problem was happening to me with an older OS but ONLY when I used both PowerPoint and Parallels at the same time. For this probem I took the MacBook into the Genius Bar and had to leave it there through the weekend and all day Monday. They told me after running multiple tests they found no hardware problems and the issue had to be software. The only fix was a five day depot repair. I thought I would manage by not using PowerPoint and Parallels together but now, with the Lion Upgrade it happens with ALL apps and when I simply try to read an email.
Info:
MacBook Pro, Mac OS X (10.7.3), Black Screen of Death.
View 1 Replies
View Related
Feb 12, 2012
I am experiencing black screen and kernel panic issues on a macbookpro 5,5 (Late 2009) running Mac OS X Lion 10.7.3. Theses are two of the most recent error reporting logs sent over to Apple Inc.:
Log 1: Interval Since Last Panic Report: 5191 secPanics Since Last Report: 1Anonymous UUID: Sat Feb 11 19:27:15 2012Panic(CPU 1): NMIPI for spinlock acquisition timeout, spinlock: 0xffffff80149c2c40, spinlock owner: 0xffffff80141c4000, current_thread:
[code]....
View 3 Replies
View Related
Apr 1, 2012
I bought a MacBook Pro 17inch i7 in November 2010 and it was working fine under Snow Leopard and Lion since then. Yesterday I installed Bootcamp and it was workng also. Today when starting from Bootcamp to Lion I had a Kernel Panic (had this never before) and the screen turned black.I just have the energy cable connencted to it, the computer starts somehow (noise) but no Startsound and screen keeps black.Then I made a little mistake by inserting a LION installer DVD. Cannot get this out anymore, even when I press the trackpad when starting it.I changed the internal hard drive to be sure that the problem does not come from there. I reset the PRAM. I reset the SMC. No way to get the laptop back to work.
Info:MacBookPro, Mac OS X (10.7.3), 8 GB RAM, 30 ACD
View 5 Replies
View Related