Hardware :: Making Extended Airport Network A Bit More Reliable
Jun 12, 2009
Right now I have a 500gb Time Capsule (single band) in one room being extended by an Airport Extreme (N-mode, single band) in another. If you were picturing a number line, the TC would be at 0, the AE would be at 5, and I sit at 10.
I always have a full signal to the AE, but every now and then, my internet stops connecting. So in other words, the actual wifi signal itself is fine, it's the internet.
So I keep my Airport Utility open to troubleshoot this, and I notice that when internet goes out, Airport Utility no longer shows the TC on the lefthand side where it lists the devices, leading me to believe that for a moment, the two lose connection of each other.
View 6 Replies
ADVERTISEMENT
Dec 23, 2009
I have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies
View Related
Apr 5, 2012
I have a setup as in the diagram below. Internet Router connected to my Airport Express N which creates a N-class network. Then I have an Time Capsule in another room that extends this network. My iMac is connected to this Time Capsule using Ethernet (WiFi is turned off completely).
iTunes is 10.6.1 (7)
Airport Express and Time Capsule have the latest firmware (v7.6.1)
Internet, sharing and other functions are working fine, just Airplay from the iMac doesn't work anymore to the Airport Express. I've tried lots of solutions, and this just seems to be broken. I've submitted to Apple feedback as well explaining the situation and that this doesn't work. If I add/remove a password or enable/disable airplay on the Express, it does reflect in iTunes. It also shows that the Airplay is locked/unlocked (see image) and also shows it as a visible audio destination.
But when you activate it from iTunes, it doesn't ask for any password (if enabled), but it just displays the "connecting" dialog for about 1 minute and then closes the window without any error and just does nothing. It's like iTunes cannot communicate to the Airport Express, although at the same time I can connect to it's internal configuration (edit) and also connect to the internet, my router's config using a browser, etc. without any problems. Also, if I'm using my iPad and iPhone, I can easily use the Airport Express from those devices, but NOT from the iMac.
Info:
iMac, Mac OS X (10.7.2)
View 3 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Jul 5, 2012
How do I reformat a MacBook Air from Mac OS Extended to Mac OS Extended (Journaled) so it will boot / reinstall Lion?Â
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Aug 6, 2007
What's the difference between Mac OS Extended and Mac OS Extended (Journaled)? Which one is better to format an external hdd that's going to be use mainly as a scratch disk?
View 9 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Apr 21, 2010
I have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
View 2 Replies
View Related
Jul 8, 2009
Here is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
View 11 Replies
View Related
Aug 26, 2006
I'm working on a project involving large video files (100 mb or so) and I need to make these available on the web somehow. They will be available only over a closed network (a school), and I'm thinking of either embedding them in a web page, or using Quicktime Streaming server. If the internet connection is fast (which it is in this situation) would either solution work fine? Or would one load faster than the other?
View 3 Replies
View Related
Mar 20, 2010
With my MacBook Pro sitting on the desk right next to my Airport Extreme Base Station, I get, according to iStumbler, a varying signal strength between 50 and 75%. I see the same with my wife's MacBook. I also have an Airport Express in another room set to "Extend a network" and I see about the same there. Shouldn't the signal strength be higher?
View 2 Replies
View Related
Jan 20, 2009
I am wondering if I am getting a good transfer rate on my time capsule. (Using leopard). If I alt (option) click on the airport icon on the top of the screen, I can get details to my network. One of the details is transfer. I am assuming this is the speed of my network. Do you know what this is measured in? When I have the time capsule as a G router I get a transfer of 130. When I have the TC as an N router, I get a transfer of 200 - 264. Can anyone tell me if these numbers are good, or do I need to do something to get the numbers closer to where they should be.
View 2 Replies
View Related
Jun 4, 2009
I have recently upgraded my wireless network to N+ using a Belkin Modem Router. Security is WPA2-PSK, and MAC access is disabled. All MacBooks (Leopard & Tiger), PCs (XP) and iphones connect without any problem, however my daughter's PowerBook G4 running OS X 10.4.11, and with the most recent Airport software, can't connect to the network. The password prompt when selecting the network only allows for entering a WEP password.
View 13 Replies
View Related
Sep 22, 2009
My problems are getting bigger and bigger:
1. I could not activate my airport card after installing 10.6
2. I erased all data in system configuration as other threads told me
[URL]
3. Then my MB said that there is no airport card installed (but it is)
4. After that I tried to reinstall 10.6 but DVD stopped loading and said it interrupted
5. Now I�m even not able to open network preferences! It loads, and loads, and loads...
6. I installed 10.6.1 but nothing happened
I feel like snow leopard (and my attempt to clear the situation) killed network on my MB-Pro.
View 1 Replies
View Related
Jan 19, 2010
I'm trying to use my work laptop at home. I can get it to connect to my Airport network, but it can't see the internet. I'm using WPA for authentication on the Airport.
View 5 Replies
View Related
Nov 6, 2010
I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies
View Related
Dec 24, 2010
I have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
View 1 Replies
View Related
Feb 29, 2008
I keep noticing that my MacBook keeps scanning for the network I'm currently signed on to. Is this behavior normal or should I take it in to the Mac store.
View 24 Replies
View Related
Sep 3, 2009
I recently got a PowerPC G4 from a family member and reinstalled Mac OS X 10.5. I did this without the Airport Extreme card installed. After installation I put the card in, and after booting up I thought the card would be recognized. I was wrong. Any suggestions besides that the card might be bad, that I can do to fix this? The card works on other machines.
View 1 Replies
View Related
Oct 9, 2009
Back when I did this last time I found some detailed instructions, but of course I didn't bookmark them. I now changed the channel and now I lost the connection to the second one, which is only used for music.
I have a WPA/WPA2 password and an restricted access list.
We're on Leopard.
View 1 Replies
View Related
Nov 28, 2009
Im a Little bit of a Nooby when it comes to this
How to Set up a new network with my airport express
How to Set up in What is in the Screen Shot
View 3 Replies
View Related
Jan 5, 2010
Is this possible? I use my wireless connection at home and at school. In home I use google dns however in school I cannot use any dns it is not allowed. For this reason I add and delete dns adresses everytime. It is quite boring. Is there a way or application that allow me set different dns adressses for different network connections?
View 3 Replies
View Related
Feb 3, 2012
i'm using a MacBook Pro and Ableton Live 8, for those familiar... I have to create an ad-hoc network to get some apps like Liine apps working with my other Apple devices. Liine has some very clear and simple videos, as some i saw on Youtube. The thing is, for some reason, i don't have the AirPort option in my settings. I downloaded AirPort Utility 6.0, but it doesn't find a network or i don't know what.
Info:
iPhone 4
View 13 Replies
View Related
Sep 9, 2010
Lately I've been noticing that my Airport disconnects about every 10 - 15 mins or so and then reconnects after it searches for a network, which is mine. 99% of the time I'm sitting right in front of my router. I've reset the router, rebooted, reset my pram, and the problem still persists. This issue doesn't occur on my girlfriends HP.
View 2 Replies
View Related
Nov 3, 2010
New here and new mac user all together. I have looked quite a bit for an answer to this question but have not found one that applies directly to my situation.
My dilemma is that my apartment complex has free (unsecured) wireless but currently with my macbook pro, I can not register the signal in my living room. I just got Airport Express with the idea of extending the signal to all areas of my apartment. However when I go to "Join current wireless network", the apartment's signal does not show up (two other networks do show up though they are password protected).
I have read here that certain routers are not compatible with Airport Express (is this true?) and I am wondering if that's a possibility here.
Is there a fix for this? Do I need access to the router?
View 2 Replies
View Related
Dec 11, 2010
I recently replaced my aging linksys G router with an Airport extreme. I have an HP 2605dn printer connected to it via ethernet. When I set this up with the old router everything worked great, printer showed up in OSX and added with a couple of clicks. Now that I have moved to the airport I cannot find the printer at all from OSX on either my MacBook Pro with 10.6 or my Powerbook with 10.5. However all of the Windows 7 machines I have in the house see it and print fine. I feel like I'm missing something very simple and help would be amazing.
View 6 Replies
View Related
Dec 31, 2010
When my laptop awakens from sleep, it forgets which network my wifi should be on and I end up on some network that's in my building instead of my own. Is there any way to keep my airport pointed to my home network only at all times?
View 1 Replies
View Related
Jan 13, 2011
I have a MacBook Pro from 2009. The airport has abruptly stopped finding any networks. I have had problems in the last few months (just after I moved to the states from Canada). My roommates' laptops could pick up the network, and mine kept dropping out. I went home for the holidays, and it worked fine (despite the router being even further from my computer).
when i returned, i had a few days of very spotty internet (much higher number of drop outs) and now it won't detect a single network. My warranty is up so i'm nervous that this is something internal they have to replace, but I"m hoping there is some way for me to check. I just tried to connect at work, and it detects nothing here too. so it is NOT interference.
sidenote: My graphics card is malfunctioning (which is under extended warranty for this model), and I am taking that to get replaced today... is there any crazy conceivable way that the two issues could be connected???
bottom line: what can I do now to rule out (or in) the possibility of hardware malfunction causing my airport to stop detecting networks?
View 3 Replies
View Related
Apr 10, 2008
I have a macbook air, but this seems to apply to any mac's with airport. I connect once to our corporate wireless network, I type in the password and it connects. On occasions, when I start up the computer, it doesn't connect and a window pops up with my network listed but it says "none of your preferred networks are available". When I first connect I do check off remember this network. So why isn't it remembering it?
When I go into system preference and click on network, select airport and click on advanced, that network does appear under the preferred networks. Does anyone know why its not letting me automatically connect the next time? Sometimes its ok, sometimes it doesn't even know I connected to this network before.
View 19 Replies
View Related
May 15, 2008
I can't get our G3 iBook to connect to our AirPort network anymore. It's the last-gen AirPort Extreme base station (domey type with a modem) and I've successfully used our wireless security in the past. We use WPA/WPA2 Personal with a 40 character password. The iBook has worked before with this configuration, and it works when there is no security set up, but even though our town is filled with computer illiterates and there are only 2,000 of them, I'd like security.
View 2 Replies
View Related
