I am running 10.7.4, build 11E53, and running into this problem:
The thing hangs here, like so.
Thinking it might explain something to someone I ran tail -f /var/log/install.log in terminal and got:
Jun 23 23:54:55 EyeToEye-2 diskmanagementd[825]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x1058a3c20=disk0s2=Orbit inWhatStr=RecoveryInfoBaseSystemVersion
Jun 23 23:54:55 EyeToEye-2 diskmanagementd[825]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x1058a3ae0=disk0s3=Recovery HD
I updated with the latest Lion patch yesterday and since then Entourage has either hung or taken a very long time to update from our 2003 Exchange server (I have MS Office 2011 but as you're probably aware, there are issues integrating with a 2003 Exchange server). how this might be fixed, short of updating both our 2003 Windows Server to Windows Server 2008 x64 and Exchange to 2010 so I (the only Mac user out of 85 staff) can use Outlook 2011?
I've update to 10.7.4, and ever since my iCal and Mail get the beach cursor - I've waited an hour and longer and then forced quit them, after that they work for a few minutes (Mail longer, iCal until you create or change an item). I realise that Spotlight is reindexing (since this morning, and still saying "estimating indexing time".
I had to force it down during the installation cause in hang up. When I tried a restart the grey screen comes up as usually and the small wheel spins underneath. It spins for hrs. I tried the safe mode but it shows that all is good with the HD. Bootcamp works normally as I am writing from that part right now.
Running OS X 10.9.4 and, ever since the last update, I have been encountering several issues with iTunes (hangs up when trying to open, have to force-quit), Safari (pages not loading, long periods with "pinwheel of death"), Youtube Downloader keeps crashing, Apps like iPhoto, App Store, and Mail taking VERY long to open, if at all...
Long story, but basically I got an "invalid sibling error" on my intel IMac and was told the best fix was to zero the HD and reinstall. I did this and got Leopard running. Now it hangs while I try to update to 5.10.8. I downloaded the combo update from Apple after it failing through system update.
I'm not sure what the issue could be. I've verified the disk, checked it's smart status is ok and run the hardware test from the install disk.
Not quite sure what to do.Installed 10.5.7 on my iMac and my Air with no issues.Was running the update onto one of my mac minis and it hung in the "Running Installer Script" bit. After an hour I decided to power cycle which it had no issues with. When I check the OS now it says it is on 10.5.7. but I'm not sure how to confirm that the update has been completed correctly.
First the specifics: I have a MacPro, Version 10.6.2 for OSX. I did the latest update that showed for Safari. It went to reboot and just sat there and hung. I waited for 10 minutes, then manually restarted the Mac. It came up, but then when I went to open Mail, I got an error that it couldn't open. I then clicked on ok, and tried to open another app, and it wouldn't open. I tried with several apps with the same result. I downloaded the MacOSXUpdCombo10.6.2.dmg and ran it with no problems, and the Apps will still not open?
I am running Lion 10.7.3 on a 2.8GHz CoreDuo iMac from 2007 and on a Macbok Air 2.13 GHz Core duo from 2010. The iMac has 4GB of RAM the Macbook has 2 GB RAM.
I run Microsoft Office 2011 on both machines. For the same file the Macbook operates normally on Word and Excel. The iMac is slow at best and when I try a Save As it hangs for up to 15 minutes brfor letting me change the FIle Name. This effectively makes it unusable.
As far as I can tell the set up of Office on both Machines is identical and I have eliminated duplicate Fonts as suggested by some posts but the problem remains. I have checked Activity Monitor and I am not getting any Page Outs so RAM does not appear to be an issue.
After "upgrading" to Lion, my MacPro refuses to complete either a Restart or Shut Down cycle. How can I discover what is hanging up the process? System: MacPro1,1; 8GB RAM, OS X 10.7.3, 4x2TB internal drives, all software updates applied.
I have a longish list of bookmarks, which I synchronize to iCloud. When adding new ones or editing existing ones, I find at least 50-75 per cent of the time Safari hangs for a minute or so, spinning beachball and all.
It's been happening for a while now and I had hoped 10.5.3 would fix. When I choose to restart or shutdown, 90% of the time it hangs on grey screen after logging out and I have to hold down power button to shutdown. No apps hanging. Also have problem where when I open the cover to bring my MBA out of standby mode, I'll be presented with the logon screen. I'll type my password and my screen goes blank like it's gone back to sleep but the power light is fully lit. Have to close cover, wait till it goes on standby, then open cover to bring up password logon again. Should I reinstall OS X again?
I try to quit iPhoto and the massage keep saying "Photos are being imported to the photo library" even there is no iPhone or iPad connected. The problem still remind for 3 days and cannot force quit or any option to close the program.
When I insert/take out my earphones in/out of the headphone jack it takes OSX about 12 seconds to figure out I have done that and switch audio output settings & set the volume. All those 12 seconds the system seems to be like hung with the colored spinwheel cursor spinning. I have resetted PRAM, and also upgraded 10.5.7 to 10.6.1 but the problem is still here.
Started the 10.7.4 install, and it halted. Turned my Mac off, started it back up, and apparently the 10.7.4 update didn't install, but it has caused the Mail function to not work AT ALL - I get a long error report that is auto sent to Apple.
I downloaded Lion from the Apple store, but have my Snow Leopard disk. How do I go about re-installing Mail?
Info: Mac Book Pro, Mac OS X (10.6.5), 2.93 GHz Core 2 Duo 4 GB 1067 MHz DDR3
"Software Update can't connect to the Update Server" - so I can't even check to see if updates are available.This has been going on for sometime. For a while if I created a new admin account and used that it would work, but not today.Tried creating a new admin account but to no avail.
I clcik on the Apple Icon, (top left hand side of screen), click on SOFTWARE UPDATE, it runs for a split second, then: [URL]after which I check my internet connect to see that it's fine. (And I attempt to run SU with nothing else using the internet). [URL] I've checked the forum and found a few people with the same problem. I've tried deleting PLISTs and using 008.008.008.008 DNS address, [URL], but still cannot get it to work. I still have my old G4 Power running OS 10.5.8 connected to the same modem (Netcomm NB6PLus4w Modem which has 4 ports) as my Mac Mini, and it runs Software Update without any issues. So it's not my internet connection and it's not the Apple server, so it's something about the Mac Mini that's not right.
Mac-Mini 2.4 GHz Intel Core 2 Duo - OS 10.7.2 - 8GB 1067MHz DDR3 Memory.
Info: Mac mini, Mac OS X (10.7), Netcomm NB6PLus4w Modem
I just bought my MacBook Pro and installed the updates... however, when I try to update my iTunes (since it says version 10.6.3 is available) but when it's almost done I get a message stating it can't be installed because the "update cannot be verified". How do I upgrade my MacBook to the latest iTunes?
Info: MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4)
I recently noticed that my DVD drives "hang" when I don't use them for extended periods of time, when I press the open tray button on the keyboard (or use the icon on the menu bar) the drive tries to open (I can hear the tray pull out slightly) but then it doesn't fully extend the tray (bay door on the chassis slightly open).
A reboot will not fix this issue but a complete shutdown of the system and power-up will, it is the same for both of my SATA drives.
Anyone else has experienced this issue in their system?
I have a mac pro running leopard (purchased in 2/08) and it was running beautifully for almost 2 months with no hangs, crashes or freezes. Then, for some reason, today when I turned it on, it would not boot. It would get to the apple logo, then just sit there for a few minutes, then reboot itself and the same thing would happen.
I pulled out the ethernet cable, unplugged all usb except keyboard/mouse and it would then (sometimes) boot into the system, log me in and present me with the UI. I then quickly performed a soft reboot and it would get to the desktop. However, I can only use it for anywhere from 30 seconds to 5 minutes before it would completely lockup. The clock freezes, the mouse freezes and it just sits there forever. I have tried booting into Vista (BootCamp) and it also freezes before startup is complete....................
My primary machine went down today. Came home from work, went to wake it from sleep, it was unresponsive, black screen, power light constant. Checked all connections, tried powering off, waiting, reboot, grey pinwheel on boot from HDD. Tried booting from OS install DVD, same issue.
Removed all extra RAM, HDD's. Left standard ram and standard drive blank in computer, tried to boot from SL install dvd, hangs at same point. You can hear the DVD spin up, the pinwheel spins and then hangs after a while. I have tried a SMC reset. Zapping PRAM etc.
When I run software update I am told my software is up to date on my macbook air. However, I only have OSX 10.6.8. My iMac is up to date with 10.7.2. Running the current OSX 10.6.8 on my macbook air, I do not have the ability to have iCloud options in my system preferences, only mobile me.
