I just bought my MacBook Pro and installed the updates... however, when I try to update my iTunes (since it says version 10.6.3 is available) but when it's almost done I get a message stating it can't be installed because the "update cannot be verified". How do I upgrade my MacBook to the latest iTunes?
Info:
MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4)
I'm running a MacPro 10.6.8.Â
When I did the normal software update, it installed the Java update and one other, but had an issue with iTunes 10.6.3.Â
It says 'The update iTunes cannot be installed - the update cannot be verified'Â down at the bottom I see - iTunes partially downloaded 22%Â
I've rebooted and re-run software update several times, exact same issue, it won't try to download it. How do I clear out the partially downloade file and fix this?Â
Info:
Mac Pro Quad, 16GB, HD 3870, Mac OS X (10.6.4), FireFace 400, Intensity hdmi, Logic 9, FCS3
I can not download the new version of iTunes - 10.6.3. It will not go past 39.8Mb of the download from the software updates. When I try to download directly from the Apple download page, it does absolutely nothing.Â
Mac mini (Intel)
OS 10.7.4
2 Gb RAMÂ
Info:
Mac Mini, Mac OS X (10.6.4)
I am attempting to update to the lastest version of iTunes and receive the following error message: "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs." Every subsequent time that Software Update runs it restarts the download from where it was interrupted, and gives the same error prior to completion. It seems obvious to me that the partial file I have on the computer is where the corruption lies, and I would like to delete it and start the update from the beginning. The question is, where is the partial file stored, and what is it called?
Info:
iMac, Mac OS X (10.7.4)
I have a MacBook Pro running Mac OS X 10.7.3 Lion. Since I have gotten it, I've used Software Update without experiencing any problems - until now. Now, whenever I try to download/install updates, I get an error message saying "The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs." What is going on, and how can I fix this?
Info:
MacBook Pro, Mac OS X (10.7.3)
tried to update software and message showed update could not be verified. may have been corrupted during download. Update will be downloaded and checked again next time software update runs, anything else I can do?
View 6 Replies View RelatedInstalling Update problem. In attempting to update from 10.9.1 to 10.9.4 i get the following message An error has occurred and it says OS X Update Combined could not be verified etc.
Info:
iMac, OS X Mavericks (10.9.1), Imac 21.5" Late 2012
Every time it shows in the end of process that update is failed. The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs. I have MacBook Pro 13 inches with Mac OS 01.7.2.
Info:
MacBook Pro, Mac OS X (10.7.2)
My apps need updates and I can't update bc the Applie ID will not change from the old email address that I was using to the new one I have verified.
Info:
iPhone 4
've been trying to update iPhoto for over a month now and every time I try I get an error message saying "The product distribution file could not be verified. It may be damaged or unsigned.)Â I tried to uninstall it tonight and then reinstall but now when I go to the App Store to try to download it, it tells me the same error message except now I can't even redownload the file or anything.Â
Info:
iPhoto '11, Mac OS X (10.7.3)
If I create a smart playlist in itunes and deselect live updating then how exactly does the smart playlist load up?
The reason I ask is that started setting up Smart Playlists for all of the artists on my computer and they're all set to live update which is consequently slowing down my itunes. I realize that I may not necessarily need that. My question is though...how exactly would I go about manually updating a smart playlist that has live updating turned off?
Info:iPad
why don't java security update show up in software update? macbook pro with mac os lion
View 2 Replies View RelatedI updated with the latest Lion patch yesterday and since then Entourage has either hung or taken a very long time to update from our 2003 Exchange server (I have MS Office 2011 but as you're probably aware, there are issues integrating with a 2003 Exchange server). how this might be fixed, short of updating both our 2003 Windows Server to Windows Server 2008 x64 and Exchange to 2010 so I (the only Mac user out of 85 staff) can use Outlook 2011?
Info:
MacBook Pro, Mac OS X (10.7.3)
My wife macbook pro os 10.7 don't show the java security update in software update
View 2 Replies View RelatedStarted the 10.7.4 install, and it halted. Turned my Mac off, started it back up, and apparently the 10.7.4 update didn't install, but it has caused the Mail function to not work AT ALL - I get a long error report that is auto sent to Apple.Â
I downloaded Lion from the Apple store, but have my Snow Leopard disk. How do I go about re-installing Mail?Â
Info:
Mac Book Pro, Mac OS X (10.6.5), 2.93 GHz Core 2 Duo 4 GB 1067 MHz DDR3
"Software Update can't connect to the Update Server" - so I can't even check to see if updates are available.This has been going on for sometime. For a while if I created a new admin account and used that it would work, but not today.Tried creating a new admin account but to no avail.
I clcik on the Apple Icon, (top left hand side of screen), click on SOFTWARE UPDATE, it runs for a split second, then: [URL]after which I check my internet connect to see that it's fine. (And I attempt to run SU with nothing else using the internet). [URL] I've checked the forum and found a few people with the same problem. I've tried deleting PLISTs and using 008.008.008.008 DNS address, [URL], but still cannot get it to work. I still have my old G4 Power running OS 10.5.8 connected to the same modem (Netcomm NB6PLus4w Modem which has 4 ports) as my Mac Mini, and it runs Software Update without any issues. So it's not my internet connection and it's not the Apple server, so it's something about the Mac Mini that's not right.
Mac-Mini 2.4 GHz Intel Core 2 Duo - OS 10.7.2 - 8GB 1067MHz DDR3 Memory.
Info:
Mac mini, Mac OS X (10.7), Netcomm NB6PLus4w Modem
When I try to update my mac i get the following error:Â
"A network error has occurred. Check your Internet connection, and then try again." Â
This has been happening for over a week now. Looking at the Console I get the error:Â
"4/10/12 8:03:54.398 AM Software Update: Error: The operation couldn’t be completed. (NSURLErrorDomain error -3001.) (NSURLErrorDomain code -3001)"Â
I've verified and repiared disk permissions a couple of times and restarted the system with no success.
Info:
MacBook Pro, Mac OS X (10.7.3)
I can't update imovie '11 because i have to update to 10.7? How do i do that?, I cant update imovie '11 because i have to update to 10.7?
View 3 Replies View RelatedIm having problems with software update im trying to update two machines one is running 10.6 and one is 10.7 and i was downloading the update and got the same error message at the end of each download that itunes file was corrupted and would redownload when i reran software update but each time i re run it I get the same error message. I want to know if there is a way to reset the downloadÂ
Info:
OSx lion, Mac OS X (10.7)
I'm trying to update my Macbook Pro to the new 10.7.4 I have downloaded the update twice (no interruptions during download) and when i click to restart the computer to install the update, the update dosent install. I keep getting an error message saying the download is corrupted, when the update tries to unpack to install. Â
Info:
MacBook
Pro, Mac OS X (10.7.3)
I was about to download osx lion 10.7.3 update but i get two download types, client and client combo?Â
Info:
iPad 2
I created 2nd profile account yesterday and i can update all software on it except on mine
Info:
iMac, Mac OS X (10.7.4)
Yesterday Apple released Safari 5.0.1 and Magic Trackpad and Multi-Touch Trackpad Update 1.0, but Software Update on my Mac makes me able to download only the first one (Safari 5.0.1) - which I did. Why can't it find the Multi-Touch Trackpad Update?
- My MacBook is fine (it's 13-inch, Mid 2009).
- My OS is fine (Mac OS X v10.6.4).
Sure, I can download it manually, BUT it makes me really annoyed if something on my Mac works not as good as it should.
I have problems since applying the latest security Update 2009-001 and Java 10.5 Update 3, I have 10.5.6 on the new unibody 2.4ghz and have completely lost the ability to connect to my wireless access point which is an apple airport extreme base station.
I can sometimes se the base station but cannot connect to it and sometimes cannot see it at all. I have three other apple computers at home all less then a year old running the same build of 10.5.6 but have not updated them and they all are fine.
This one was perfect untill I applied the update.
The machine I am having problems with is partitioned with windows 7 beta on it which has no problems connecting to the base station, which indicates that its not a hardware problem but more then likely the update which is causing the problem.
Is there a way to uninstall the last update or delete it? Any one with a similar problem or know how I can fix it, I have googled but cannot seem to find anyone with similar problems.
I was wondering whether to update the nvidia drivers from time to time, is this done through and included in the normal 'software update' from the top-left apple menu bar or do I have to go to the nvidia site and manually update each time?
View 14 Replies View RelatedMac OS X 10.5 Security Update 2009-001
[URL]
Java for Mac OS X 10.5 Update 3
[URL]
How do you get a new version of Quicktime when it states that the msi for the old version is no longer available?
Info:
Quicktime, Windows
7
bootcamp is telling me i have to update my software inorder to use bootcamp assistant (im setting bootcamp up for the first time) anyways mac was installed a few days a go so i know it doesnt need to be reinstalled ive already repaired my disk permissions and of course i have tryed to update my software: its up to date apparently im ot the only one whos had this issue (i researched before i decided to ask)im running 10.6.4 on a 2007 imac so its intel based thats not an issue
View 6 Replies View RelatedA Brother printer update has just appeared in my Software Update, to my surprise.
I actually thought Apple had stopped offering Software Update to third parties, as the only other one I can think of is the Stuffit update that appeared several years ago on fresh installs of OS X (not sure if it still does).
If you have an ALUMINUM MacBook and you updated to 10.5.6 with Software Update (NOT the Combo Update), then please post the build number here.The more replies, the better.Also, please specify if you have 2.0 or 2.4.
View 17 Replies View Related