Long story, but basically I got an "invalid sibling error" on my intel IMac and was told the best fix was to zero the HD and reinstall. I did this and got Leopard running. Now it hangs while I try to update to 5.10.8. I downloaded the combo update from Apple after it failing through system update.
I'm not sure what the issue could be. I've verified the disk, checked it's smart status is ok and run the hardware test from the install disk.
I've had some disk errors (Missing thread record) on the 2GB drive in my Imac i7. After repairing with Diskwarrior the problem reoccurred after a few days.
I did bad block test and everything was OK, so I was thinking it maybe was the OS (10.6.2) causing the error.
I DL the 10.6.2 combo update,to do a reinstall but the installer won't let me install "Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update" -any suggestions?
I updated with the latest Lion patch yesterday and since then Entourage has either hung or taken a very long time to update from our 2003 Exchange server (I have MS Office 2011 but as you're probably aware, there are issues integrating with a 2003 Exchange server). how this might be fixed, short of updating both our 2003 Windows Server to Windows Server 2008 x64 and Exchange to 2010 so I (the only Mac user out of 85 staff) can use Outlook 2011?
Info:
MacBook Pro, Mac OS X (10.7.3)
If you have an ALUMINUM MacBook and you updated to 10.5.6 with Software Update (NOT the Combo Update), then please post the build number here.The more replies, the better.Also, please specify if you have 2.0 or 2.4.
View 17 Replies View RelatedI've always wonder this, Does anyone know if the combo update has a security update as well?
View 3 Replies View RelatedNot quite sure what to do.Installed 10.5.7 on my iMac and my Air with no issues.Was running the update onto one of my mac minis and it hung in the "Running Installer Script" bit. After an hour I decided to power cycle which it had no issues with. When I check the OS now it says it is on 10.5.7. but I'm not sure how to confirm that the update has been completed correctly.
View 1 Replies View RelatedCan anybody help me in how to update the MAC OS X 10.5.4 to 10.5.8, using COMBO UPDATE. I had downloaded the mac os x combo update for developing applications for iphone using sdk.
View 4 Replies View RelatedI just purchased a Pro Tools system, and they strongly recommends using the combo update. The problem is I allready have the normal update installed on my imac. So my question is if I can download and install the combo update, even though i'm allready running 10.5.6 trough the normal update?
View 1 Replies View RelatedRight after I ran the 10.5.5 Combo update my computer went haywire. I'm getting random -50 errors left and right. All kinds of stablility problems are showing up. I can't make folders. I can't copy and paste. I tried to download something from safari and it said I didn't have enough disk space even though I have over 250GB free. Then when I try to restart I spun on the grey screen for hours. Tried to reinstall the OS from the disk and it failed. Lost a lot of files. I switched users and my external HDs unmounted and couldn't come back. It's gotta be the update right? I heard of about 4 other people who use their computers in completely different fashions who all had the same or close variations to these problems when they installed the new updates.
Anyone experiencing this or am I crazy?
Is it worth it? Are all the bugs out? Pros/Cons?
View 2 Replies View Relatedim trying to update my 10.4.11 Mac osx on my macbook pro with the 10.4.9 combo update (intel) I have 40 gigs of free space on my harddrive. Ive tried the repair disk permissions and have downloaded the update directly from the apple site. I keep gettting this message (with a red exclamation mark):
"You cannot install Mac osx update combined(intel) on this volume. This volume does not meet the requirements for this upddate"
Dear members the one thing i've neglected to do is install a combo update to my intel imac. Is it to late and should I do it asap?
View 5 Replies View RelatedFirst the specifics: I have a MacPro, Version 10.6.2 for OSX. I did the latest update that showed for Safari. It went to reboot and just sat there and hung. I waited for 10 minutes, then manually restarted the Mac. It came up, but then when I went to open Mail, I got an error that it couldn't open. I then clicked on ok, and tried to open another app, and it wouldn't open. I tried with several apps with the same result. I downloaded the MacOSXUpdCombo10.6.2.dmg and ran it with no problems, and the Apps will still not open?
View 3 Replies View RelatedI've update to 10.7.4, and ever since my iCal and Mail get the beach cursor - I've waited an hour and longer and then forced quit them, after that they work for a few minutes (Mail longer, iCal until you create or change an item). I realise that Spotlight is reindexing (since this morning, and still saying "estimating indexing time".
Info:
Mac mini, Mac OS X (10.7.4)
I am running 10.7.4, build 11E53, and running into this problem:Â
The thing hangs here, like so.Â
Thinking it might explain something to someone I ran tail -f /var/log/install.log in terminal and got:Â
Jun 23 23:54:55 EyeToEye-2 diskmanagementd[825]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x1058a3c20=disk0s2=Orbit inWhatStr=RecoveryInfoBaseSystemVersion
Jun 23 23:54:55 EyeToEye-2 diskmanagementd[825]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x1058a3ae0=disk0s3=Recovery HDÂ
Info:
MacBook, Mac OS X (10.7.4)
After downloading the 10.5.8 Combo update I click on it to launch and I get an error message that the .dmg failed to mount b/c it was "not recognized".
What should I do?
I've been having some issues with Mail (long story- anything after an image or an attachment in a message I create is showing up as a .htm or .txt file) and one suggestion that someone made was to download the 10.6.2 combo update and try to reinstall it to ensure that everything is all up to snuff.
Strangely, when I DL'd the combo update and tried to run it, my hard drive showed up with an exclamation mark and said I couldn't install it. Can one typically install the update on itself?
Also, is there any chance in heck that it will actually make a difference (friendly wagers here are fine, as I don't expect anyone to know for sure)?
I have SL Mac OS X 10.6.2...
Can I still get the combo update or should I simply get the regular update? I understand that the combo is all of the updates but just trying to see which will be better..
I had to force it down during the installation cause in hang up. When I tried a restart the grey screen comes up as usually and the small wheel spins underneath. It spins for hrs. I tried the safe mode but it shows that all is good with the HD. Bootcamp works normally as I am writing from that part right now.
Info:
MacBook Pro, iOS 5.1.1
Running OS X 10.9.4 and, ever since the last update, I have been encountering several issues with iTunes (hangs up when trying to open, have to force-quit), Safari (pages not loading, long periods with "pinwheel of death"), Youtube Downloader keeps crashing, Apps like iPhoto, App Store, and Mail taking VERY long to open, if at all...Â
15" Macbook Pro, 2.2GHz Intel Core i7, 16 GB 1333 MHz DDR3Â
Info:
MacBook Pro
Power PC 17" Powerbook, 1.67 speed, 1GB Ram, 9GB available, stay up with all updates...all of a sudden only Internal Microphone and Digital In appear. Did Permissions before and after update, tested with plugs in and plugs out of line in and line out, so Whassup?
View 7 Replies View RelatedI updated a Mac G5 desktop from 10.5.2 to 10.5.8. When I finished I realized I had used the server version of the combo updater instead of the regular one. The machine seems to be running OK. Will this cause problems and how should I fix it.
View 3 Replies View RelatedHave a G4 desktop running 10.3.5 that I tried to combo update to 10.3.9. The update was stuck at 30% for a long long time. I just figured it might take awhile and took a nap. I awoke and there was an error message that the update could not be completed. It said to try the update again by downloading it and then opening the package manually. So I was going to do that but a bit later the computer froze up and I had to force shutdown.
Upon booting the screen didn't boot all the way; only partially and then screen goes black. I ran Disk Utility from Install Disk to try to Repair the hard drive. It said keys were out of order. Later it said repair couldn't be completed because of an error.
I am running the Mac now from a Firewire drive with 10.3.2. I want to update the Firewire drive to 10.3.9 and want to make sure the same thing doesn't happen.
i just updated from 10.5.1 to 10.5.8 with the combo update. it now will just hang at the apple logo. i have a dual boot on the same drive with 10.4.11 thus i am able to post this.. disk utility finds no errors. reinstalling is last resort..
ibook g4, 1.2ghz, 1.25gb, 80gb.
Every time I try to download the combo update from Apple I'm getting the message "Mounting Failed." Does anyone have a fix for this or know why this is happening?
View 6 Replies View Relatedi've tried to install 10.5.2 via the software update and directly downloading the update. either way, it eventually says it can't validate the contents of the package.
am i the only one who is not able to install the update? is there a solution to my problem?
I'm installing 10.5.6 on the family MacBook (white) and it was running 10.5.4 previously, yet hanged when I was updating everything (there was a few updates) so I had to force power off. The Mac says it is running 10.5.6, but I wanted to apply the combo update to be safe. However, it fails when installing (it doesn't get to the stage where it reboots, still in OS X at this stage). It says "The installer could not install some files in "/". Also, repairing Disk Permissions failed too. Prior to the update, everything was working fine - I'm usually full of ideas, but when it is your Mac that is playing up I'm very keen to hear what others have to say.
View 2 Replies View RelatedMuch to my surprise it didn't seem to install on my system!... Still running 8.0.2.
Can anyone confirm?
On my mac developer program it says mac os x 10.6.3 delta update and another one that says combo update. What's the difference?
View 10 Replies View RelatedI need to get the App Store working so that I can re-install a Lion upgrade that I already purchased before. I had to replace my HD and now with 10.6.8, the App Store will not open.I have installed the 10.6.8 Combo Update and then done the other software updates through the System Preferences.This still comes up when I try to open App Store: "App store cannot be opened because of a problem.
Check with the developer to make sure App Store works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.Click Report to see more detailed information and send a report to Apple." This is the "Problem Details and System Configuration": [code]
Info:
Mac OS X (10.6.8)
