MacBook Alum 13' Late 2008.
When I insert/take out my earphones in/out of the headphone jack it takes OSX about 12 seconds to figure out I have done that and switch audio output settings & set the volume. All those 12 seconds the system seems to be like hung with the colored spinwheel cursor spinning. I have resetted PRAM, and also upgraded 10.5.7 to 10.6.1 but the problem is still here.
Why do I get the spinning wheel while I'm typing? It holds me up for 3 seconds at least each time.
Info:
MacBook Air (13-inch Mid 2013), OS X Server
My iMac is really slow when I turn it on. The internet starts to come up but I get the dreaded spinning colored wheel. I have another Windows computer that hits the internet immediately. I am seeing the spinning wheel more and more all the time.
View 2 Replies View RelatedMy SL was working perfectly until yesterday. I got my late 08 UMBP back from AppleCare without any replacement (see post here). They just run a kind of apple test suit on an external OSX, I guess they booted from a firewire disk.
Anyway, now I getting very often a system hang with a spinning wheel. When I try to repair permissions in the Disk Utility, the progress it stays like 10 minutes on the same place at the very beginning, then spinning wheel again then the system doesn't react. I can move the mouse that's all.
My imac recently shows colored spinning wheel and freezes. what this means?
Info:iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
If I have 2 tabs open in safari and try to open 2 facebook games like farmville and hidden chronicles I get the coloured wheel and safari locks up and I have to force quit.
View 1 Replies View RelatedSometimes when I am on the internet I see a colored wheel that spins and I am unable to go the the next page. I also noticed that sometimes the computer is slow. Csn this happen because I upgraded to Mac OS X? Never saw this before.
Info:
iMac (24-inch Early 2009), Mac OS X (10.7.4)
I can't quit, or force quit in finder. Beach-ball continues to spin and spin
Info:
iMac, Mac OS X (10.6.2)
I have 2 MBP's, a Mac Pro, and a Mac Mini. On all of these I use a Logitech Trackman Wheel with. I updated the first 3 machines to Snow Leopard and the Logitech Trackman Wheel continued to work fine. I then upgraded the last MBP to Snow Leopard. For some reason the scroll wheel no longer works on the Logitech Trackman Wheel. I am able to use the ball to move around the screen, the buttons still work, but the scroll wheel won't work.
View 2 Replies View RelatedAnyone come across this? I 've been having it a lot recently on my imac, not my pbook though, and I can't seem to find how to fix it... very strange behaviour, as soon as you start writing the cursor vanishes...make for some very hard writing I tell you...
Well, that's ms, they might even have it as an option somewhere that I cannot find...
I have some strange colored dots on my screen that will not go away.
The weird part is that they are not stuck in place but seem to be shadows that are not coming through the right color.
I am new to macs so if someone could tell me how do take a screen shot I will put it up so you can see.
I turned on my macbook today and found these colored lines down the center of my screen: (sorry for the bad quality, but you get the idea) Is this from a crack in the LCD screen, and would it be possible to replace this myself so I don't have to spend a few hundred dollars on it at the Apple store?
View 1 Replies View RelatedI was just working on my MBP a few minutes ago when all of a sudden the screen messes up and the desktop is jumbled up in little colored boxes. I tried restarting, with no luck. It's a few years old, and I had AppleCare, but it has expired. I'm on my iPad now (it's all I have), so I took a picture and uploaded it to my Facebook so you all can see what I'm dealing with. [URL]
View 5 Replies View RelatedI noticed that on my macbook pro retina, i never heard the fans spin up.
I tried Prime95 to stress the CPU, temperature went up to 98°c and the fans stayed at about 2000rpm... I immediately stopped to avoid damages.
Info:
MacBook Pro with Retina display, Mac OS X (10.7.3)
My display has colored vertical lines on it and I can't get the computer to do anything. Powering it off and then on again the lines just come up again. This computer is about 2 months old so this shouldn't be happening.
View 1 Replies View RelatedWhen I go to turn on my MacBook pro nothing happens. No sound no hd spin no nothing. Last put computer to sleep and had it plugged in charging. Now when plugged in led doesn't turn green or any color just stays off and battery detector on side of laptop does nothing at all.
View 19 Replies View RelatedI was noticing a lot of slow-down while playing computer games on my MBP. My computer far exceeds the minimum requirements for everything, so I reckoned it must have been something other than a slow processor (2.53 GHz Core 2 Duo), low ram (4 GB) or a completely inadequate graphics card (Nvidia 9400M). The games range from 'Day of Defeat: Source' to the 8 year-old 'Return to Castle Wolfenstein'. After a bit of research, I came to realise that my exhaust fan is never speeding up past 2005 RPM no matter WHAT the load on the CPU is. To test this, I downloaded smcFanControl and ran CPUTest. As the CPU went from 50*C to 95*C, there was hardly any change in the fan's speed. The variation went between 1995 and 2005 RPM.
In order to keep the computer relatively cool when playing games or doing anything that is CPU-heavy, I have to manually increase the fan's RPM in smcFanControl. I find that setting the fans to the maximum, 6000 RPM, keeps the computer cool enough to process these games. This program works wonders and I've not had any slow-down in games as a result. However, I am worried that there might be something wrong with my Mac. Why does it not automatically increase fan speed when reaching higher temperatures? I've even reset my SMC (SHIFT-CONTROL-OPTION-Power) on start-up just to be sure I've tried everything. Any suggestions as to why my fan seems stuck at 2000 RPM?
MBP, 13-inch, 4GB RAM, 2.53 GHz
I've recently uninstalled Fan Control and smcFanControl from my Macbook Pro, after trying them for a minute or two. I reset my SMC by using the method on Apples website (Clicking Shift-CTRL-Option-Power Button at the same time). It haven't worked it seem, as I have tried running some games and even at 85-90C degree, its not increasing its RPM. I don't wanna go any higher as I don't wanna risk the CPU overheating.
View 8 Replies View RelatedMy 11 month old macbook pro (2011) was recently sent under warrenty for Harddisk SPIN RETRY COUNT value increase. They changed the harddisk and installed new Toshiba harddisk. Which ran 100% S.M.A.R.T health for two weeks and now it is showing same Spin retry count problem. I am thinking its not the harddisk but something else is causing the problem( may be power supply problem). I am from nepal so it takes a lot of effort to send it in for repair.
Info:
MacBookPro, Mac OS X (10.6.8)
I was went onto updates and clicked install to a new Java update. Then apple update froze with a multi colored circle. I use force quit which worked, but some other apps wouldn't open after this and just sat there bouncing on the dock for ages. So next I selected restart from the apple menus and it was going through the shutdown process but didn't complete and just left my desktop sitting there. After 10 minutes, I help in the power button to manually shut it down, now it has restarted its all fine. What do you think could have happened, I have had it on for the past 3 days only sleeping it.
View 3 Replies View RelatedMy 2 year old Macbook pro has started to run really slowly, with the multi coloured pinwheel appearing whenever I try to do something. I've taken this to the Apple store, and have been told that it's either the hard drive that has given up and will need to be replaced, or that it's the cable connecting the hard drive to the laptop.
Info:
MacBook Pro (13-inch, Mid 2012)
Basically, after the fans rev up to 6200rpm, the rpm stays there and never comes down, even after the computer is sitting idle for awhile. I installed the smc update and am using coolbook to try to avoid core shutdowns. Is anyone else having this problem? I'm going to try replacing the thermal glue tomorrow, to see if that helps, but it seems somehow unrelated to me. I'm using smcfancontrol to monitor the rpm of fans.
View 11 Replies View RelatedI have had my macbook pro just over a year with no problems. Now I am trying to burn a folder with work in it (indesign, etc) but when I put a blank cd or dvd-r in, it is not recognized. It doesn't spin, no noise, etc. I have tried clicking on the folder and choosing the "burn this folder" option, but the result is the same. Music and data CD's are recognized. I already have an appt. with the genius bar, but I'd really like to avoid the hassle if possible. I just did all firmware updates and software updates.
View 6 Replies View RelatedI got a new macbook black that is not covered under warranty, the magsafe fried on it and it used to boot up but not charge the battery or show any signs of power from the magsafe so then I bought a new magsafe that connects to the logic board and replaced it and when I plugged the power adapter in it tried to turn on right away and then the fan spinned and the sleep light light up then it shut off right away and I didn't smell nothing from the macbook or logic board. The battery now charges and the light on the magsafe adapter lights up so I tried to turn it back on and it doesn't the same thing turns on and then right off just the fan spins and then the hdds spin lasts for like a sec or two. I tried to turn it on with the battery out and with just the battery in nothing swapped the RAM same thing went from two 1 gig sticks to 2 256mb sticks and then tried another two 2gig sticks same thing then I tried a different hdd and have the same thing happen? What I need to do to get this working and yes I tried a google search and every1 ended up taking it to apple and I cannot do that.
View 4 Replies View Relatedtoday while I was working on my dissertation the screen on my MacBook Pro suddenly froze halfway with colored vertical lines covering the right half of the screen. The computer is only 1 year and 1 week old.
Info:
MacBook Pro (15-inch Mid 2012), iOS 7.1.2
Over the past few weeks my blackbook has been shutting down more and more frequently from what I can only believe is overheating. I just checked my computer upon startup with SMC fan control - it starts up at about 70 C and at about 3500 RPM. Yet, after a few minutes, the fan immediately drops down to 1100 RPM or and fluctuates between 800-1400. I try to force the fans to spin with SMC Fan control, but nothing happens. I've looked all over the web and I can't find anything definitive. I know that macbooks tend to overheat. What can I do? I'm at college and I really need to find a fix for this as soon as possible.
View 1 Replies View Relatedi have a 2.4 ghz alum macbook and i was wondering at what temperatures does your fans start to actually spin up. i'm at 70C right now and it still hovers at +/- 2000 rpm just wondering if this is normal i used smc fan controller for a little bit but i decided that i would just leave it to apples default and use a laptop cooler if i really need the extra disccipation.
View 5 Replies View RelatedLast night, after a few hours of using it (from 100% to about 8%), I tried turning off the computer for the night. After the dock and everything else disappeared, I got a spinning beach ball of death. The computer wouldn't turn off for at least 15 minutes. I had to do press the power button for 5 seconds to get it to turn off. I restarted it this morning and it seems to be working fine for now, but I'm scared of turning it off again.
Here's what I know: while the beach ball was happening, my wallpaper was still on the screen, the trackpad worked, but the brightness and volumes didn't, so I'm guessing I was logged out and no files were corrupted.
During the beach ball, the hard drive would slow down, then spin back up. I waited until it had slowed down a bit to do the hard reboot. I have to say that I reset the PRAM yesterday morning, thinking it might be good because I changed the hard drive to the Momentus XT last week and I read that you should reset it when you change hardware inside the machine. I did that before the crash, so when it crashed, it was the first time I tried to turn the machine off since resetting the PRAM, could that matter?
This morning, I went to disk utility and repaired permissions, there were probably a few hundred bad permissions, but Mac OS fixed them. I also tried verification, but it was alright. I then ran the daily, weekly and monthly tasks and everything went great.
What should I do? I already have a charger problem and a �screen is too blue whichever way I set it� problem. Do I have a lemon here?
It's been happening for a while now and I had hoped 10.5.3 would fix. When I choose to restart or shutdown, 90% of the time it hangs on grey screen after logging out and I have to hold down power button to shutdown. No apps hanging. Also have problem where when I open the cover to bring my MBA out of standby mode, I'll be presented with the logon screen. I'll type my password and my screen goes blank like it's gone back to sleep but the power light is fully lit. Have to close cover, wait till it goes on standby, then open cover to bring up password logon again. Should I reinstall OS X again?
View 3 Replies View RelatedWhen I insert a DVD into the MacBook Pro Drive it makes a loud spin noise and the DVD ejects. I've tried with multiple DVD's and still experiencing the same problem.
Info:
MacBook Pro
