MacBook Pro :: "Invalid Block Count, Your Disk Is Corrupt And Needs To Be Repaired"
Mar 26, 2012
I seem to be getting an error message when i run Disk Utility, it says "Invalid Block Count, your disk is corrupt and needs to be repaired". I then repair it using the Lion recovery disk and it repairs it. Maybe a month or so down the line it appears again I then do the same and the end result is the same, can anyone help with this as it is worrying me. Also is there any way you can get rid of the bad sectors in the HDD when problems appear?
View 4 Replies
ADVERTISEMENT
Dec 3, 2014
I've run the disk utility verify disk several times and come up with an error (post title) indicating I have a corrupt HD and need to repair. I've rebooted with command R and run disk utility to repair the disk and it says everything is fine. Reboot to normal mode and verify continues to show the error.
Other info says the file system exit code is 8.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mountain Lion (10.8.2)
View 2 Replies
View Related
Apr 17, 2012
I am having a very slow running iMac on snow leopard 10.6.8, and using disk utility, am being told the disk needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. The volume Macintosh HD was found corrupt and needs to be repaired.
Missing thread record (id = 1322757) Incorrect number of thread records
Invalid volume file count (It should be 880464 instead of 880473)
So I need to find my installation disk, and my question is: is this installation disk internal, somewhere within the iMac, or is in on a physical cd somewhere in my mess?
Info:
iMac, Mac OS X (10.6.8), only 6GB free space
View 2 Replies
View Related
May 1, 2012
My wife's macbook pro started shutting down by itself randomly, so i performed Disk Utility Verify Disk and found these errors: Invalid volume file count(It should be 800651 instead of 800653)Invalid volume directory count(It should be 191005 instead of 191003)The volume Macintosh HD needs to be repaired. Error: Filesystem verify or repair failed. As i do not have the Mac OS Leopard disks physically with me, I target-disk started her mac on my mac, and use my mac to run Disk Utility on her hard-disk, and repaired the disk without problems.
However, this is the 3rd or 4th time this has happened. After the 1st time, i figured something is causing it, so i checked this forum, and found that for some, the Blackberry Messenger app causes programs, so i promptly uninstalled it fully (including associated system files) and this problem didnt come back for a while. Or could this be a sign the hard disk is physically failing soon? It is out of warranty now. We have regular Time-machine backups. We are actually kinda waiting out until the new line of macbook pro's come out..
Laptop stats: MacBook Pro 15"
2.4 GHZ Intel Core 2 Duo
2 GB RAM
HDD: 250GB
Graphics: NVDIA GeForce 9400M VRAM 256MB
OS: Mac OS Leopard
View 2 Replies
View Related
Jul 30, 2008
what utilitiy fixes this?
full error:
Verifying volume �Macintosh HD�
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid leaf record count
(It should be 623360 instead of 623358)
Checking volume information.
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
View 6 Replies
View Related
May 27, 2012
Any ideas on this...my Imac (2.16 Ghz. running system 10.6.8) has bee having difficulty in starting up (lost of hard drive noise and crawling to start up) lately and I have Drive Genius 3 as a diagnostic tool, so I ran "Repair" and "Verify Permissions" and came up with the message" Permissions Error : ARDAgent. app....I gathered some info on these boards to use the app Pacifist (V 3.0.2), to re-install the ARDAgent and it should clear up the problem...followed the plan, ran Verify Permissions in Drive Genius 3, which said it was repaired...I then ran Verify to confirm and came back with Verify Failed, Invalid Directory Count, should be 38 instead of 39, and should be 47 instead of 45...But am getting the same results when I run Drive Genius 3 which is the Volume is repaired, but the Verify has failed.... A real stumper...any ideas? Also just up graded to Firefox 12.0 which is when the slowdown started to appear
Info:
iMac, Mac OS X (10.6.8)
View 4 Replies
View Related
Dec 30, 2010
I am new to Mac OS X and I haven't made an Boot disk yet nor anything. I just wanted to check my disk for the first time and this came up. I've a Macbook air without an optical drive just the USB stick with mac OS X which was delivered with it. Can I repair it or do I need to do a reinstall of all the OS X?
View 5 Replies
View Related
Apr 28, 2009
I had a presentation today, and plugged my MacBook Pro ('06 version, and 10.4.10) laptop into a projector. Right as I did that, things went a little crazy, the audio was coming out with hissing, it was running very slow, and overall just went from running great to disfunctional. It finally froze, and I shut it off. A couple of hours later, I'm failing to get past the blue screen during the start-up. When i run in safe mode, its just shuts off while i'm holding the shift key
View 1 Replies
View Related
Apr 19, 2012
It has, in fact, gotten worse and I need to start the thread again. Earlier, I started up my computer and noticed that is was very slow to boot up, the Dock was missing and it was generally slow and unresponsive. Also, the machine would not shut down or restart unless I forced it to with the power button.
" Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.dock.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
[code]....
Is this something very bad? I goggled "incorrect block count" and I see some other people have this issue even just today (though not exactly the same).
View 14 Replies
View Related
Apr 24, 2012
On one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
View 9 Replies
View Related
May 21, 2012
I already repaired the rights on the disk. Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 14 Replies
View Related
Jun 30, 2012
I've used the disk repair utility and repaired successfully. My book is still frozen at the logo and spinning cog. I have to hit the power button to shut down - And the hard drive gets super heated. What else to do?
Info:
MacBook
Pro, Mac OS X
(10.6.2)
View 1 Replies
View Related
Apr 14, 2012
I purchased a new MacBook Pro 17" with OS X Lion (10.7.2) preinstalled back in January of this year (2012). I migrated my user accounts from my old MacBook Pro 15" (2008) running OS X Snow Leopard. Almost right away I started having issues of all sorts, including Admin accounts that wouldn't allow me admin priveledges, hidden user groups, apps that wouldn't run, multiple obscure error messages and a host of other issues. After scouring forums like this one I used Disk Utility and not only discovered innumerable permission errors but also disk errors like these:
Invalid volume file count
(It should be 1656658 instead of 1656636)
Invalid volume directory count
(It should be 345764 instead of 345743)
Invalid volume free block count
[code]....
And now, this morning, after a month or two of all that... and after installing the Java Security Upgrade last night, I can't get into my accounts at all. On first boot-up it hung for 20 minutes before I shut it down. After running Disk Utility from Recovery Drive and repairing the drive I rebooted and got the log-in screen. I clicked on my user icon, typed the correct password, was shown they white/grey screen for a few flickering seconds then was brought back to the log-in screen. I rebooted to the Recovery Disk, ran Disk Utility, saw all the same errors again, repaired the disk, rebooted and got the same problems with logging in again.
I've repeated this cycle five times today, as both a normal boot-up and in "Safe Mode" all with the same results. I've repaired the disk using Disk Utility from Recovery Disk as well as accessing the disk in Target Mode, and always there are the same errors needing to be repaired.
I don't buy that I'm dealing with a hardware issue. My antivirus and security software are all up-to-date. What the heck is going on? Why do I keep having these disk problems? Why can't I access my accounts anymore? Why does it keep hanging during boot-up? Why am I about to throw the machine out my bedroom window?
Info:
MacBook Pro, Mac OS X (10.7.3), MacBook Pro 17" (early 2012), Lion
View 4 Replies
View Related
Jan 13, 2011
In 09 I got my first mac and loved it. I had about a year to get to know it. its file structure, file types etc. So to say the least, I didnt have enough time to really get everything down pat. Like where all the specific files are, etc. I ended up 1300 bucks short for my engagement ring so it was either sell my car or my macbook (I made the wrong choice.) At the time I had a 512GB Intel SSD in the main drive bay and a hitachi travelstar 500GB 7200 RPM drive in the optibay. I had used Carbon copy cloner NUMEROUS times during testing and messing around with the dual drives and different partitions (at one point having OSX, XP and Linux on at the same time.) So to say the least I was very familiar with how to use CCC. So when I sold my MBP I threw the optic drive back in and sold it with the SSD. I took my 500GB hitachi drive, formated it in an external closure and used CCC to image my mac. It has ALL my pictures and home movies on it allong with a lot of programs. I think I was using something like 400GB of the 500 GB drive. All the personal files were encrypted using disk utility. Then I booted it to make sure it worked. Everything worked great So I put the now external drive in a case and it sat inside of a drawer.
fast forward to now. I purchased my mother a mac mini for christmas. This was a great opportunity to get all my encrypted pics and movies off the drive. So i plugged in the drive via USB, rebooted holding option and it shows the drive but wont let me boot it. When I plug in the drive while the mac is on, a message pops up saying "the disk was not readable by this computer". When I open disk utility and try to repair it, it says disk utility cant repair, back up as many files as possible, blah blah blah. the only info it gives me is the name of the disk which is disk2s2, and that it is formated as mac os extended. Apparently Between me testing to see if this disk was bootable, packing it up and storing it in a drawer and pulling it out a year later it got corrupt and wont boot. So here is the deal. I installed Data rescue 3. The first option I try is quick scan. DR3 tells me right away that the boot files are corrupt and it will need deep scan. So I run Deep scan and 10 hours later I have A LOT of system files. I have tried to go through it and find the encrypted files (which should just be dmg's right?) but no luck. Is there anything else anyone can think of to get the files off of this "corrupt" drive? I dont have enough experience with the Mac file system and just the mac in general to get this thing to work.
View 3 Replies
View Related
Dec 4, 2014
Disk Utility when I run verify says I need to reboot from the Repair Disk. I tried (twice) and it shows no problems. When I reboot normally, and run DU, I get the same error. Which result should I believe?? And is there a workaround? Using 10.10.1 / Air late 2011.
Info:
MacBook Air (13-inch Mid 2011), OS X Yosemite (10.10.1)
View 8 Replies
View Related
Nov 29, 2009
I was using my MacBook (Late 08' Unibody Backlit) listening to a bit of Spotify ect. Shut it down normally. When I booted later on I turned it on and a progress bar comes up goes not very far across at all and starts again. Get's to roughly the same point only to shut down. This has happened consistently. Windows 7 still works though so that rules out a complete Hard Disk failure. I have tried booting from SL DVD and repairing permissions and the disk only to be presented with an error message telling me to backup as many files as I can and restore. (If I new how to backup these files I most certainly would). After this I tried to install SL again (I understand the default is an archive and install) and before it even starts it tells me that it cannot be installed on this disk.
View 13 Replies
View Related
Mar 28, 2012
My Finder says that I have about 50GB free, Disk Utility says I have about 20GB free, and Boot Camp says I have less than 10GB free. I ran a Disk Verify in my Mac OS Partition, it says the OS disk is corrupt. I went to the Recovery Partition, it says everything is fine. What do I do to fix these issues?
Info:
MacBook, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 6, 2008
I'm not really sure what to do or what exactly is wrong. I'm hoping not to reboot or reinstall all together, but if I have to... I suppose there's no choice. I tried 'Verify Disk' from the utilities, but is fails and says
Invalid volume file count
(It should be 712836 instead of 712840)
Invalid volume directory count
(It should be 171417 instead of 171413)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
I tried doing a 'Repair Disk' from the installation CD, but it says it fails because it could not unmount the HD.
View 15 Replies
View Related
Mar 11, 2012
Since a week or 3 my Imac is bleeping whenever the harddisk is put to work. Before this it was impossible to make a time machine copy, it would hang at a certain point. I recently did a disk utility scan which could not be finished (aborted by the system) as it was saying (translated from Dutch):
"Volume-information being checked Wrong amount of free blocks on this volume (Has to be 38684126 in stead of 38684119)The volume 'Macintosh HD' is damaged and need to be repaired.Error: this disk needs to be repaired. Restart system with another disk (like Mac OS X-installdisk) and use disk utility to repair this disk."
So I put the installdisk 1 in, but the Imac spits it out, refuses to start up in harddisk repair mode or any other mode at all. It just spits it out and starts as usual. Install disk 2 it doesnt spit out, but I can only open a read me file. Like said, the Imac works fine, except that it is guided by literaly hundreds of beeps in high and low, short and long. I feel like being at a supermarket having my items scanned. That is what it sounds like. It is quite vocal but annoying and seem to multiply every day. In the beginning it only did at start up just a few beeps, then it got more, and now it beeps also in sleep mode.
I cannot do a disk repair, also not with the latest OS X update (snowleopard, since Lion is not working on my 1GB drive). I do notice though that the difference in this error code is getting bigger, it used to be just one block difference, now it is 7.
Also I took the memory modules out yesterday and put them back in, as I heard this can also help get rid of the beeps. It did not solve anything at all.I can't find anything on this problem on internet, because all beep related topics are about the error codes for the RAM drives. These are not the same sounds. Another attempt was to install the cms program to avoid overheating fans. Also no improvement.
Info:
iMac, Mac OS X (10.6.8)
View 10 Replies
View Related
Jul 1, 2014
when using OnyX or Disk First Aid, a message states to restart the computer, holding Command-R and to repair my disk.Every single time, the disk turns out to be OK.
Question 1: Is this a false reading, or is the disk actually being fixed by the Control-R combination?
Question 2: If it is NOT a false reading, since my programs don't crash and I always shut down properly, what could cause the errors?
Macbook Pro 13, 10.9.4, 4GB RAM
View 5 Replies
View Related
Jun 22, 2012
I'm having some trouble with my Macbook. It's running on Leopard 10.5.8. I recently tried to partition my hard drive and while doing so it prompted me informing me that there was an 'invalid node structure'. I could then no longer proceed with the partition. I had planned on updating my OS to Snow Leopard. I wanted to partition my internal HD, so I backed up some files on my external HD. I basically wanted my interal HD to run smoothly with a new OS while minimizing the space used. Now I've come across this issue where there is another message being prompted that says, 'invalid sibling links on hard drive'. I found THESE steps on another forum that informed me that this might restore the hard drive back to a readable/functional state but that didn't work either:
(These were the steps I took and nothing happened except another prompt informing me of an 'invalid node structure')
Boot off the OS X CD (reboot, hold C while booting).The installer will load up, go to Utilities in the menu and run Terminal.Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step.
I then stumbled upon a few different forums mentioning something about Disk Warrior. I was wondering if THAT would resolved this issue. Honestly, I don't really want to spend much money on buying this but I WILL buy a new hard drive if I ABSOLUTELY need to. I was just trying to see if I can troubleshoot this before I decide to throw in the towel and buy a new hard drive or attempt to try out this Disk Warrior thing.
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Feb 19, 2012
I used Carbon Copy Cloner to back up to an external hd. Do I now erase the hd reistall the mac os, then pull my files and apps fom the ext hd?
Info:
imac 24", Mac OS X (10.5.6)
View 3 Replies
View Related
Jul 2, 2012
Disk Warrior reported a damaged resource header that cannot be repaired. The resource header is in an "older" file format (rsrc). I have been having fairly frequent freezes of the system and Disk Utility reporting a corrupted HD which Disk Unility is always able to repair and report the HD to be O.K. Could the damaged header be the cause of the freezes? If so, can anything be done about it if Warrior says it cannot be repaired?
View 4 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
Sep 2, 2014
How can I backup my Mac when it stop working and I can't repair it?
View 1 Replies
View Related
Jun 20, 2012
I cannot see my external hard drive. I cannot see it in finder. When I started disk utility it says I need to repair but than it says it cannot be repaired. Is there a way I can reach the data? I don't know what happened to the disk.
Info:
iPad, iOS 5.1
View 1 Replies
View Related
Jun 30, 2014
My computer had a spinning wheel yesterday that would not go away, so I forced a shutdown (had done it before with no problems). However, now my computer goes straight to the diagnostic tool, and when I try to repair disk0s2, it cannot be repaired. I didn't have Time Machine automatically running, and my most recent backup is too old and I don't want to lose all of our pictures. is there any other way to recover files off of this disk?
View 1 Replies
View Related
Aug 26, 2014
My 2012 MacBook Pro got stuck on the screen with the apple logo and spinning wheel after I tried restarting it.i haven't updated it recently and it was working fine before I restarted it. I did command-r when restarting and when trying to repair the disk I got the following message:
Checking file system
checking journaled HFS Plus volume
checking extents overflow file
checking catalog file
keys out of order (red)
rebuilding catalog B-tree
The volume macintosh hd couldn't not be repaired (red)
volume repair complete
updating boot support partitions for the volume as required
error:disk utility can't repair this disk....disk, and restore your backed-up files (red)
what do i do?? is my computer crashed?
Info:
MacBook Pro
View 1 Replies
View Related
Feb 6, 2012
What pin count is the firewire port on the new MacBook Pro? I have tried 9pin and 4pin and they are not compatible...?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Mar 28, 2012
My 11 month old macbook pro (2011) was recently sent under warrenty for Harddisk SPIN RETRY COUNT value increase. They changed the harddisk and installed new Toshiba harddisk. Which ran 100% S.M.A.R.T health for two weeks and now it is showing same Spin retry count problem. I am thinking its not the harddisk but something else is causing the problem( may be power supply problem). I am from nepal so it takes a lot of effort to send it in for repair.
Info:
MacBookPro, Mac OS X (10.6.8)
View 1 Replies
View Related
