Intel Mac :: Disk Warrior Reported A Damaged Resource Header That Cannot Be Repaired?
Jul 2, 2012
Disk Warrior reported a damaged resource header that cannot be repaired. The resource header is in an "older" file format (rsrc). I have been having fairly frequent freezes of the system and Disk Utility reporting a corrupted HD which Disk Unility is always able to repair and report the HD to be O.K. Could the damaged header be the cause of the freezes? If so, can anything be done about it if Warrior says it cannot be repaired?
View 4 Replies
ADVERTISEMENT
Jan 11, 2010
I have a G5 running Leopard that I have a 2nd hard drive on. It had b-tree node issues, but now Disk Warrior says "the directory cannot be rebuilt, original too severely damaged, error code 2156,-57. The volume wrapper is damaged and needs to be repaired." Disk Warrior doesn't seem to fix it, how I can get my data back?
View 1 Replies
View Related
Mar 11, 2012
Since a week or 3 my Imac is bleeping whenever the harddisk is put to work. Before this it was impossible to make a time machine copy, it would hang at a certain point. I recently did a disk utility scan which could not be finished (aborted by the system) as it was saying (translated from Dutch):
"Volume-information being checked Wrong amount of free blocks on this volume (Has to be 38684126 in stead of 38684119)The volume 'Macintosh HD' is damaged and need to be repaired.Error: this disk needs to be repaired. Restart system with another disk (like Mac OS X-installdisk) and use disk utility to repair this disk."
So I put the installdisk 1 in, but the Imac spits it out, refuses to start up in harddisk repair mode or any other mode at all. It just spits it out and starts as usual. Install disk 2 it doesnt spit out, but I can only open a read me file. Like said, the Imac works fine, except that it is guided by literaly hundreds of beeps in high and low, short and long. I feel like being at a supermarket having my items scanned. That is what it sounds like. It is quite vocal but annoying and seem to multiply every day. In the beginning it only did at start up just a few beeps, then it got more, and now it beeps also in sleep mode.
I cannot do a disk repair, also not with the latest OS X update (snowleopard, since Lion is not working on my 1GB drive). I do notice though that the difference in this error code is getting bigger, it used to be just one block difference, now it is 7.
Also I took the memory modules out yesterday and put them back in, as I heard this can also help get rid of the beeps. It did not solve anything at all.I can't find anything on this problem on internet, because all beep related topics are about the error codes for the RAM drives. These are not the same sounds. Another attempt was to install the cms program to avoid overheating fans. Also no improvement.
Info:
iMac, Mac OS X (10.6.8)
View 10 Replies
View Related
Feb 19, 2012
I used Carbon Copy Cloner to back up to an external hd. Do I now erase the hd reistall the mac os, then pull my files and apps fom the ext hd?
Info:
imac 24", Mac OS X (10.5.6)
View 3 Replies
View Related
Apr 17, 2012
I am having a very slow running iMac on snow leopard 10.6.8, and using disk utility, am being told the disk needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. The volume Macintosh HD was found corrupt and needs to be repaired.
Missing thread record (id = 1322757) Incorrect number of thread records
Invalid volume file count (It should be 880464 instead of 880473)
So I need to find my installation disk, and my question is: is this installation disk internal, somewhere within the iMac, or is in on a physical cd somewhere in my mess?
Info:
iMac, Mac OS X (10.6.8), only 6GB free space
View 2 Replies
View Related
Feb 18, 2009
Yesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
View 1 Replies
View Related
Apr 11, 2010
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies
View Related
Jun 19, 2012
I got SMART warning about my hard disk, I got it replaced by a shop, but said I would do OS restore myself. (cant afford cost )Thought it would be simple - but it is anything but. It appears my install DVD is damaged, so was not able to boot with Grey OS install disk - holding the C key.I managed to get iMac to boot up using the old disk - using firewire dock. However I was not able to restore old disk and OS to new disk, Due to IO read error.(this is why I had the SMART warning). So I am unable to get the OS on the new HD using the old disk or the DVD as these are both damaged. The computer is running, so I thought I would try buying and downloading LION - then using the migration tool . The download is still running after 2 days.I went to apple store, and was told that they cannot replace DVD , so I should bring in the iMac = and pay for the restore. Dont wish to do this. As I have the computer and OS running, is there anything I can do to get a time machine restore from another backup disk (USB).
Info:
iMac, Mac OS X (10.5.6)
View 10 Replies
View Related
Sep 22, 2008
I ran disk warrior on my g-4 and the report came up with these listed below.
Warning: SUID file "system/librar/coreservices/finder.app/Resource damaged and will not be repaired.
Warning:SUID file"usr/bin/Ippasswd" has been modified and will not be repaired.
I used spotlight to search for using some of the words but cannot find any thing in reference to the 2 warnings, so I can figure out how to repair them.
View 7 Replies
View Related
May 20, 2009
I have an I mac running 10.4. I had to reboot it form Dis warrior, DW did it thing told what ever was wrong and it fixed, now when is all done scanning and "fixing" my computer the reset button on the DW is grayed out, only the cancel button is on. I have reboot it about 4 times to no avail same thing happens.
View 3 Replies
View Related
Aug 7, 2009
Need a little help with an HD... Does anybody knows how Disk Warrior works?...i mean: do it repair phisical damages on Hd? i think my hd has, becouse the needle is "clicking" and cannot read anything...
I have a lot of work in this hd, that was created only for back up...
View 6 Replies
View Related
Jun 15, 2010
So my original DVD is Rev 901 of Disk Warrior and I'm using the 4.2 updater.
Has anybody been able to boot Disk Warrior 4.2 build from Rev 901 on a Core i7 MacBook Pro?
View 2 Replies
View Related
Feb 15, 2009
I recently used DiskWarrior 4.1 (with Tiger) to check the disk of a Leopard Intel IMac.
All went well, but when I tried to restart and eject the Disk Warrior CD (by holding down the mouse button), the CD would not eject, the Mac restarted with Disk Warrior as the start-up volume.
It seems like it thinks the CD is the start-up disk. I tried the eject button too (at start-up).
I tied resetting the SMC with unplugging the power and cables, no luck either.
Also tried to reset PRAM (several times), but no luck.
View 7 Replies
View Related
Apr 14, 2012
Laptop: MacBook (White), 10.6
External: Lion 10.7.6
Booting from an external drive and running DW4 on MAC OS 10.7. Trying to recover from preview pane as my internal drive will not rebuild. The folders on the internal MacHD are visible in the preview but have "minus" on them and I will not copy. It is showing it has zero bytes and when I click on the copy from the preview pane I get a message that says the operation cannot be completed because I have insufficient privilages. My ultimate goal is to get out the home folder for the user and migrate the the user files to a new MacBook Pro.
Info:
13 MacBook White 2.26 GHz (Oct 2009), Mac OS X (10.6.2), Lacie Rugged Ext Drive 500 Gig
View 10 Replies
View Related
May 10, 2010
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD. When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive. The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too. I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there.
View 3 Replies
View Related
Jan 10, 2009
If I make a mistake and I can't open OS X. In windows I think you can start in safe mode and undo the mistake? I was installing UBUNTU on an external disk, but for some reason my original OS X is not working and was affected. Disc Utility can see the disk, repair permissions and check hard drive ok. But I can still not boot from it. Now I try DiskWarrior but for the last 15 min it has been stuck on "Locating directory data" so I guess some thing is wrong. I did not try any other apps, for fixing broken hard drives yet. If Disk Warrior don't work I will try TechTool and Genius. Then it's no more options then to reinstall.
View 7 Replies
View Related
Jun 11, 2012
My hard drive decided to quit after only 22 months! Some files were backed up but my current photo albums were not. That's all I really need, I don't care about all the other junk. I've tried booting from the Disk Warrior cd, which Apple Genuis Bar suggested since they don't do data recovery.
So it there another way I can do this myself or should I just bring it to Fry's for $149?
Another question would be, after I recover the files, I'd like to upgrade my MacBook Pro 13 to a Solid State drive. I know I need a 2.5" SATA, but which brand/size is good for a $200-$300 budget?
Info:
MacBook Pro, iOS 5.1.1
View 2 Replies
View Related
Feb 22, 2010
I bought a new 2TB Time Capsule, and had problems completing the initial backup. I finally sourced the problem to files that were buried deep in a stack of folders, which seemed to make the file name/path too long. Anyway before I realized that I tried to reformat the Time Machine, and this seemed to work ok. However Airport Utility is now reporting the Time Capsule Disk Size as being 1.8TB, rather than 2TB.
I think before I reformatted the disk it showed as being 2TB in this menu, but I cannot be sure. I am worried that I have somehow formatted it wrong and lost some data space? If I go into Disk Utility, it does say there that the Data partition is 2TB, so it seems strange that Airport Utility shows it at 1.8TB. Can someone else who has the 2TB Time Capsule let me know whether in Airport Utility it shows as being 2TB or 1.8TB?
View 9 Replies
View Related
Feb 1, 2009
last week my mac (1 year old iMc, 2.4ghz intel chip, 4gb ram, system 10.5.7) went all funny, everything was working slowly - so I restarted, same thing, I restarted again and it just went to the grey screen with the spinning ball.Ok so I restarted from my tiger disk and it could see the drive, so I tried to install a new system and it got right to the end of the installation then said because of a disk error it couldn't do it.
Ok so I bought an external HD, put a system on and started up from there - now the drive came up, but things were slow still, it took forever to copy anything so I tried disk utility, it couldn't repair it. I tried drive genius, same thing. DiskWarrior 4.1.1 same thing.
Now I tried again a few times and the programmes took forever to start up but now disk utility opens after about 30 mins and can see the drive, but it's lost it's name and I can't even repair or repair disk permisssions. Drive Genius can see it but not repair and same for Disk Warrior, the 'rebuild' tool is greyed out.
It's a 500GB drive and only has 3GB spare on it, it has loads and loasds of stuff on there, work, music, films, all my preferences, passwords and of course all my software - I do have a backup of some stuff, my photos luckily enough - but I still need to get it fixed.
Now what can I do? Is there anything in terminal I can do? Any other ideas anyone? I'm desperate for help.I have downloaded Data Rescue II and it has been gathering device information for an hour, I'm hoping it will carry on and later on I can start recovering. But in all honestly is there anyway of fixing the drive?And if not can I recover and then do I need to re-format? And if so will it work ok once formatted?Also any ideas why this would have happened?
View 2 Replies
View Related
Jun 6, 2008
I'm not really sure what to do or what exactly is wrong. I'm hoping not to reboot or reinstall all together, but if I have to... I suppose there's no choice. I tried 'Verify Disk' from the utilities, but is fails and says
Invalid volume file count
(It should be 712836 instead of 712840)
Invalid volume directory count
(It should be 171417 instead of 171413)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
I tried doing a 'Repair Disk' from the installation CD, but it says it fails because it could not unmount the HD.
View 15 Replies
View Related
Apr 24, 2012
On one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
View 9 Replies
View Related
May 21, 2012
I already repaired the rights on the disk. Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 14 Replies
View Related
Jul 1, 2014
when using OnyX or Disk First Aid, a message states to restart the computer, holding Command-R and to repair my disk.Every single time, the disk turns out to be OK.
Question 1: Is this a false reading, or is the disk actually being fixed by the Control-R combination?
Question 2: If it is NOT a false reading, since my programs don't crash and I always shut down properly, what could cause the errors?
Macbook Pro 13, 10.9.4, 4GB RAM
View 5 Replies
View Related
Jun 30, 2012
I've used the disk repair utility and repaired successfully. My book is still frozen at the logo and spinning cog. I have to hit the power button to shut down - And the hard drive gets super heated. What else to do?
Info:
MacBook
Pro, Mac OS X
(10.6.2)
View 1 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
May 13, 2010
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
View 2 Replies
View Related
Mar 26, 2012
I seem to be getting an error message when i run Disk Utility, it says "Invalid Block Count, your disk is corrupt and needs to be repaired". I then repair it using the Lion recovery disk and it repairs it. Maybe a month or so down the line it appears again I then do the same and the end result is the same, can anyone help with this as it is worrying me. Also is there any way you can get rid of the bad sectors in the HDD when problems appear?
View 4 Replies
View Related
Feb 10, 2012
Warning:SUID file "system/Library/CoreS...has been modified and will not be repaired? What does this mean and how can I fix it?
View 2 Replies
View Related
Jun 11, 2012
my system preferences says that it has been damaged or incomplete
Info:
iMac (20-inch Early 2008), iOS 5.1.1
View 1 Replies
View Related
Mar 15, 2012
My iMac has been crashing a lot lately and finally it's hard drive just up and failed. I have been doing hourly Time Machine backups to a concatenated RAID set (2 USB drives of 1 TB each). However, I think the iMac crashed while backing up and hosed the RAID controller.I've since plugged the two disks of the RAID into my MacBook Pro to see if I can repair them. I can see the individual disks of the RAID in Disk Utility. I can even verify and repair them. But i can't do that with the RAID in the sidebar, and it won't mount on the desktop. When I try to eject it from the DIsk Utility file menu, it says disks are in use.
I'm pretty sure my data on the two disks is intact, but I can't seem to get the RAID to mount as the single concatenated set on a desktop, which makes it inaccessble. Is there a way to repair the JBOD RAID without losing all my data, so I can then restore from the latest backup to my hosed iMac?
Info:iMac, Mac OS X (10.7.2)
View 9 Replies
View Related
