Power Mac G5 :: Fatal Hardware Error To Disk Utility / Repaired System After Crash
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
The last couple of days safari has been crashing pretty frequently for me. I've been using chrome no problem, but i do prefer safari, so I just googled it and got pointed to Repair Permissions in Disk Utility.
So I just opened Disk Utility, which I'm fairly sure I've never used before, and it's saying, under my HD "this drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
It's saying it for both "FUJITSU MHZ2250BH FFS G1 Media" (I'm not even sure what that is) and "Macintosh HD".
There's nothing wrong with my computer? I've googled around and apparently this means my machines about to die?
On one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
Since a week or 3 my Imac is bleeping whenever the harddisk is put to work. Before this it was impossible to make a time machine copy, it would hang at a certain point. I recently did a disk utility scan which could not be finished (aborted by the system) as it was saying (translated from Dutch):
"Volume-information being checked Wrong amount of free blocks on this volume (Has to be 38684126 in stead of 38684119)The volume 'Macintosh HD' is damaged and need to be repaired.Error: this disk needs to be repaired. Restart system with another disk (like Mac OS X-installdisk) and use disk utility to repair this disk."
So I put the installdisk 1 in, but the Imac spits it out, refuses to start up in harddisk repair mode or any other mode at all. It just spits it out and starts as usual. Install disk 2 it doesnt spit out, but I can only open a read me file. Like said, the Imac works fine, except that it is guided by literaly hundreds of beeps in high and low, short and long. I feel like being at a supermarket having my items scanned. That is what it sounds like. It is quite vocal but annoying and seem to multiply every day. In the beginning it only did at start up just a few beeps, then it got more, and now it beeps also in sleep mode.
I cannot do a disk repair, also not with the latest OS X update (snowleopard, since Lion is not working on my 1GB drive). I do notice though that the difference in this error code is getting bigger, it used to be just one block difference, now it is 7.
Also I took the memory modules out yesterday and put them back in, as I heard this can also help get rid of the beeps. It did not solve anything at all.I can't find anything on this problem on internet, because all beep related topics are about the error codes for the RAM drives. These are not the same sounds. Another attempt was to install the cms program to avoid overheating fans. Also no improvement.
I have got two amazing mac's at home. a 2010 8core mac pro and a 2011 17"macbook pro. both running 10.7.4 and with Hamachi installed. They work great, but occasionally on boot they have a fatal "you need to shut down..." error. corresponding to "current thread: Hamachid". i had this a few times and decided that i was done with hamachi and i have deleted it on both machines. About two weeks later i again got a fatal on startup. corresponding to drums.Hamachid!!!so i went in to library-application support and found that Logmein still had a folder with 10 files. i again deleted that folder on both macs (today).
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD.
When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive.
The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too.
So far, I haven't had any other unusual things with the operation, but I'm concerned that this could be an early warning of problems to come.
Has anyone else had this problem or have a clue?
I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there. I hope someone will have a direct solution to repairing the drive without doing all of that.
I just got my computer yesterday and when running the "repair disk" function, I already get an error! Since I used migration assistant to move everything off my old mac to my new mac, I'm not interested in reinstalling the whole OS and transffering all my files again. This is a new computer, and shouldn't have this problem this early. I also get the same result when starting up in the recovery partition. How do I resolve this?
Info: MacBook Pro with Retina display, Mac OS X (10.7.4)
Having a major issue: similar symptoms to others in the forum - with the fan and the computer not getting past the grey apple screen, I booted from the install disk and got to disk utility, at first all options were greyed out and I could not do anything, tried again a few times and finally got to the point where I could run the verify utility, never given the option to repair. When running the utility it failed and said I needed to repair by booting from the install disk and running the disk utility? Going around in circle here - any advice? I am currently running the Apple Hardware test to see if that shows anything...it has been a workhorse and I've NEVER had any issues with it.
Information: PowerMac G5 Dual 2Ghz Mac OS X (10.5.1) 4G RAM
When I go into first aid in disk utility, and click on my system drive, the verify button is grayed out. If I remembered correctly, I was able to verify my system drive before.
I want to restore and recover OSX & Logic 8 and the software i use with it (Apogee Maestro,UAD Quad & Waves plug-ins) to a new boot disk. I have both a back up of the main OS drive on a drive with Time Machine and a disk copy of the main drive (on another) as i had it before the boot disk crashed. My question is which is the best option to take when restoring the OS etc? As I have heard that there is a couple of bugs and issues when restoring via Time Machine. Is restoring via the disk copy a simple procedure? Or, should i reinstall everything completely from scratch and copy back the receipts and authorizations perhaps? Can you point me towards the best link/method to get my setup back on track? i'm using an apogee symphony pci card
i'm trying to format a spare external, it's currently formatted to ms-dos for back up dutys on my PS3 but i want to change it to mac os extended
i've just plugged the drive in ( USB ), nothings running on it, or open on the computer from the drive, but disk utility wont erase it, i've checked permission and everythings fine but it just keeps giving me this error
google and apple fail, only thing i can find linked to it refers to operating systems running on the drive,
I ran a fix permissions today, and got the following errors. I have no idea what they mean, and am a bit concerned. Anybody have any idea what this stuff means?...
"Disk Utility has lost its connection with Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility".
I keep getting this error when trying to erase an external hard drive with Disk Utility. When I restart, the error appears again. I've seen others with this problem but haven't found a solution. I've tried removing iTunes from Applications and deleting select iTunes receipts.
I clicked "Verify Disk" and i got that, the other two options worked. I read up on this on Apple's site but I am not having any other issues than the notice. I was told to run Disk Utility ever so often to keep my mac fast. I just happened to do it today and I got that. I am trying to avoid having to do ANY sort of reformat.. I don't have any means of backup. Like I said I am not having any other problems. I am able to restart and log in without any problems. Should I be worried about this since there is no other issues besides the notice itself?
I have a G4 PowerMac with two 80 GB hard drives. When I boot up the computer, it boots up from the primary drive and runs fine. At this time, both my primary and my secondary drives are accessible and visible.However, when I boot up the computer using either the Tiger or Leopard DVDs and then run Disk Utility, it only recognizes my secondary hard drive and not my main hard drive.
I installed Ubuntu on my iMac, and it made 2 new partitions: DISK0S3 and Linux Swap. Here's what my disk utlity looks like: When I try to remove Linux Swap, it says that the partition (map is too small. When I try to remove DISK0S3, nothing happens and it keeps running forever before I press +Q to quit.
I have spent all day with a colleague wrestling with a 4 and 1/2 year old G5 tower that has been throwing up all sorts of cranky errors. (i.e. firefox crashes, flash crashes, programs wont load, itunes stops working, firewire drives make it insane). As part of the diagnostic flow, I attempted to verify permissions on the core HD. Disk utility only took a couple seconds to determine that there is some unknown error with the HD, and it cant continue. This leads me to believe that we are dealing with a flailing drive, which very well MAY be the root of the problems! Time to make an external clone onto a fresh HD, and see if that helps.
Install CCC 3. Open CCC 3, it hiccups on the dock, and then nothing. *roll eyes*. Install super duper. Run super duper. Now super duper refuses to let me make a bootable clone of the core HD? Fine, if that is how you want to play this game. I get two SATA enclosures. Put the suspect drive in one, and then a fresh drive in the other. Plug both into my MBP where i run a CCC bootable clone. Couple hours later, it is complete. Plug the new clone into the G5 tower, and it does not see it as a bootable drive. Okay, lets try the CCC clone again. Same result. I am desperate for options.
I am desperately trying to burn a ISO file to a USB and external HD but Disk Utility does not want to. Instead I get the error message "Could not validate source - error 254". So there must be a problem with the source which is the ISO file.
I already tried setting the Partition Map Scheme to both Master Boot Record and GUID Partition Table. I also formatted the drive to FAT and HFS+. I cannot find the cause of this error. It clearly looks like Disk Utility does not like burning ISOs to USBs or HDs.
However, I really really need to this since I cannot burn ISOs with my SuperDrive which is also a common problem [URL]with my MacBook Pro.
I just restore my Mac OS to a single partition and then I tried re-partitioning but it's giving me an error. I've tried several times, tried using different sizes every time. My HD's capacity is 250GB, and I've got 108.95GB free. So I am sure that making a new partition of 35 - 40 GB is not a big deal. I also tried using Disk Utility, both from the Mac OS install disc and while using the Mac OS itself, but it keeps giving me this error. I do not want to format my Macintosh HD's partition because I don't have an external HDD on me at the moment so I will not be able to back up. I have a lot of important data that can not be deleted.
933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.
I am trying to format a SDHC card on my MBP. I am trying to create a recovery SDHC disk for my MBP. The disk is a Transcend 16gb (class 10).
I formatted to Mac OS Extended (Journaled) w/ a GUID Partition Table but after this, Disk Utility is now showing only 10.38 gb of usable space, but finder is showing me the full amount (15.79 gb). When I look in finder there are NO files or folders on the drive.
I tested trying to put more than 10.38 gb worth of files on the disk and was told there was not enough space. If I format the disk to anything other than Journaled, I get the full 15.79 gb. Has anyone ever experienced this before?
I bought a 1TB Iomega Prestige drive, it worked great for a few months. Started making loud clicking sounds. Iomega sent me a replacement drive (refurbished).
I am using it as my time machine backup in Leopard, so it was really just a matter of plugging it in, formating it with the OSX file system and setting it up for time machine.
When attempting to format from Disk Utility, I get an error (see screenshot).
(Additional info: I can access it and format it without any problems from Windows 7 based PC).
After upgrading to 10.5.7, numerous permission errors highlight regularly in Disc Utility, which I run weekly (probably for too often). I never saw these with 10.5.6, or for that matter any earlier incarnation of the OS. I have also noticed progammes hanging more than before (especially Mail). I have run DiskWarrior and that didn't report anything untoward. Should I give up worrying about this and maybe join the Foreign Legion instead?
I have a G4 powerbook from around 2004 that was running slow so I tried updating the mac software since I hadnt done it in a while after downloading and installing the suggested items my computer has gone a lil crazy. First off i noticed my dock is completely missing and I've tried numerous things to fix it that were suggested to me but nothing has worked.
Next I attempted to do some restoring using disk utility that had also been suggested and it turns out disk utility wont even run I get the error message "You cannot open the aplication "disk utility" because it may be damaged or imcomplete". This message also appears when i attempt to open safari or itunes.
I am no longer able to find my restore discs so I dont have that option at the moment, any help would be greatly appreciated, I am about to go back to school to pursue another degree and not having to buy a new comp would be great news.
here are the items that were installed with the update: 2009-10-25 17:23:21 -0600: Installed "Java for Mac OS X 10.4, Release 7" (1.0) 2009-10-25 17:23:47 -0600: Installed "Migration and DVD/CD Sharing Update" (1.1)
I just installed a Hitachi 1TB drive in my dual 2.5ghz powerPC G5.
I carbon copied my old harddrive over to it.
I didn't want to reinstall my OS.
However I think I copied some problems over.
In Disk Utility when I try to Verify Disk Permissions, Verify Disk, or Repair Disk Permissions (any of the options I am allowed to do to the startup drive) it moves like 1/5th of the time bar meaning it is working then changes to "It will be completed in 1 minute" then stalls there.
Information: Dual 2.5GHZ PowerPC Power Mac Mac OS X (10.4.8) 30inch Apple Cinema Display, 4.5gb Memory, and 1.5TB of Harddrive.
Steps to reproduceOpen Disk Utility Drag an ISO image into the left sidebar Insert an USB Stick with enough space to contain the image Go to any restore tab in Disk Utility Drag the ISO file to the source Drag the Volume from the USB drive to the destination Check erase destination Hit restore
Results for me are (in any number of varieties to do this) either "Invalid argument" or in the log "Could not validate source - error 254".
