An alert box with a yellow triangle keeps randomly popping up on my screen. But I don't have time to read what it says because it disappears in 1 sec. What is it? What can I do to get rid of it?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
FCP X 10.1.2 just completely crashed - showing a white screen of death.
Now after restarting, the event I was working on shows a yellow triangle with an exclamation mark and my project is gone. Not even listed any more.
I have already repaired the hard drive and trashed the flexolibrary file but that didn't work.
Previous versions of FCP X had a backup-folder but in 10.1.2 I can't find it any more. It seems one week of hard work has just vanished.
I have a yellow triangle with an exclamation mark on my event. I was working on it and noticed it when I restarted FCP X. Could be that FCP X was crashing while copying or something. But now I don't get it away. But I looked into it.
The 4 photo's and 1 piece of music were quickly found in the menu left of the timeline. But there are two strange stings going on:
1. Scrubbing through the timeline, at certain points the Beach-ball begins to spin and won't stop. I waited 30 minutes (nothing), restart FCP X (nothing), rebooted (nothing), cleaned with Onyx (nothing): I had to force quit FCP X. I cannot see where it goes wrong, but it's at multiple points.
2. While using "relink files" all went wrong. It found photo's with te same name (but in fact other pictures). I deleted those. I went in the library (within Finder) to the Original Files folder, replaced the aliasses of the files pointing to a _Trash folder within the library. I thought the right pictures were back: no. I've dragged those back from iPhoto into the event, with the music also (from iTunes). There double now, but everything is good... except for the exclamation-mark!
Then I made a new library, dragged the project to the new library: copy used clips except the two options given (proxy en render files?). The new event also got a exclamation mark. I played the whole thing: no crashes, no beach-balls, no red missing clips signs, no yellow exclamation-mark in the Timeline Index.
In the original project I can now scrub little pieces (without spinning beach-balls) and I see the pictures on the timeline (in the preview) but with a yellow exclamation-mark in the index...? It cannot be found in the eventbrowser... how strange is that?
Since the update to Final Cut Pro X 10.1.3 I cannot go back to a previous library. What do I do. I'm afraid if I continue to edit things will go south later on.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9)
I have been having intermittent trouble with my USB ports on my Early 2011 MBP 13" i7. One port was dead. This started when I upgraded to Lion from Snow Leopard. In order to see if the problem was with the installation of Lion, I cloned my drive with Lion 10.7.3 on it and then reinstalled Snow Leopard OS from the disks that came with the computer. The problem disappeared. I restored the clone of my drive with Lion on it and the problem did not occur again... right away. Now after a day of using the computer with the restored clone with Lion on it, the problem cropped up again, but not as bad as it was before. The port stopped working, but when I unplugged the device and plugged it in again, the port worked.
I am wondering if this could be a driver issue. I just happened to notice that iTunesHelper has a Yellow Warning triangle in the Login Items window in the Accounts System preferences. And Kind is listed as Unknown. In another MBP 13" I use at work, that has Lion 10.7.3 on it, iTunesHelper has Kind listed as Application with no yellow warning triangle.Is this something to be concerned about?
Info:
MacBook
Pro, Mac OS X (10.7.3), MBP 13" i7 Early 2011
i am receiving a yellow info alert which flashes a couple times per hour but the flash is so quick, i cannot read it.any ideas on how to determine what the issue is?
Info:
MacBookPro, Mac OS X (10.7.4)
I have a 2008 macbook, out of warranty. My mac is running os x 10.6.4... I recently updated the laptop through the update section, and this is around the time the errors began. My next stop is perhaps reinstalling the operating system, but have to go out and buy the disc so thought i would check all options first.
It has begun random shutdowns recently, and i have tried checking the ram, checking power supply, removing battery to see if its caused by that, but so far nothing has come up. A mate of mine said sometimes you can work out the problem by looking at the logs to see what is causing the problem... Well, long story cut short,
the log is as follows from when i turned it on this afternoon, till the random shutdown, and then powering it back up again, i put the exact shutdown time in bold.
[I]17/08/10 4:20:33 PMcom.symantec.navapdaemonsl[49](kernel) Kext com.symantec.kext.SymAPComm not found for unload request.
17/08/10 4:20:33 PMcom.symantec.navapdaemonsl[49]Failed to unload com.symantec.kext.SymAPComm - (libkern/kext) not found.
17/08/10 4:20:38 PMcom.apple.WindowServer[65]Tue Aug 17 16:20:38 Courtney--MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
17/08/10 4:22:02 PMcom.apple.launchd[1]*** launchd[1] has started up. ***
17/08/10 4:22:07 PMcom.apple.launchd[1](com.symantec.Sched501-1.plist) Unknown key: SchedName
17/08/10 4:22:22 PMcom.symantec.navapdaemonsl[45](kernel) Kext com.symantec.kext.SymAPComm not found for unload request.
17/08/10 4:22:22 PMcom.symantec.navapdaemonsl[45]Failed to unload com.symantec.kext.SymAPComm - (libkern/kext) not found.
17/08/10 4:22:32 PMcom.apple.WindowServer[65]Tue Aug 17 16:22:32 Courtney--MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
17/08/10 4:22:39 PMcom.apple.launchctl.Aqua[87]launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
17/08/10 4:22:39 PMcom.apple.launchd.peruser.501[85](com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
17/08/10 4:22:48 PMcom.apple.launchd.peruser.501[85](com.apple.Kerberos.renew.plist[106]) Exited with exit code: 1
17/08/10 4:22:53 PMcom.apple.launchd.peruser.501[85](0x100101e80.mach_init.switchboard.sh) Failed to check-in!
17/08/10 4:23:08 PMMagicMenuHotKeyDaemon[142]Started
17/08/10 4:23:08 PM[0x0-0x11011].com.stuffit.MagicMenu[130]2010-08-17 16:23:08.043 MagicMenuHotKeyDaemon[142:903] Started
17/08/10 4:23:08 PM[0x0-0x13013].com.skype.skype[132]Main starting with pid 132 parent pid 85
17/08/10 4:23:44 PMSkype[132]SkypeApplication::init called
17/08/10 6:34:07 PMSyncServer[144][110f20] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
I've noticed that strange yellow boxes will randomly appear on my display. This happens both on my external display and hte laptop screen. I've attached a screen shot of what it looks like. It's not application specific.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
The little pop up yellow box is appearing when we mouse over this random spot on our mac-mini, and it shows random headlines with no relation to anything open, even when there isn't any programs running.
Info:
Mac mini (Mid 2010)
My computer has started randomly popping up a grey screen which tells me to restart. It keeps happening and obviously something is wrong. Not sure if it is a hardware failure but something's broke! Anyone know what the deal is? Here is my latest panic log:
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x2D9C6780)
PC=0x00306440; MSR=0x00009030; DAR=0x9C95F6DC; DSISR=0x40000000; LR=0x003063BC; R1=0x1787B9C0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x003063BC 0x002B7FCC 0x004EE0A8 0x004EDB9C 0x004EDA20 0x00465CCC
0x0049A634 0x0049A338 0x0049B6E0 0x0049BA14 0x002D1B8C 0x002D0A54 0x000A9714
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBTCKeyboard(1.3.0f1)@0x4ec000
dependency: com.apple.iokit.IOUSBFamily(2.8.1)@0x463000
dependency: com.apple.iokit.IOUSBHIDDriver(2.5.5)@0x4e6000
dependency: com.apple.iokit.IOHIDFamily(1.4.13)@0x4a5000
trying to move photos into files to place on a zip drive. All "events" have moved successfully except for 2 events that will not allow me to move them into a file.When I click on the event in iPhoto gallery, the photos appear at the bottom of my screen but a black screen with a triangle and exclaimation point appears where the enlarged photo should appear?
View 1 Replies View RelatedIf I am scrolling through iphoto, I can see all my pictures, but once I click on most of them, a little triangle with an exclamtion point shows up. I can't see them or send them. Where are my pictures.
Info:
MacBook Air (13-inch Mid 2011)
Alu 24" 2.4ghz when they first came out with aluminum, got it at the store. since august 07 My imac had a small yellow tint, i noticed, when i got it and it was not worth anyhting screaming about, i also noticed it had bleeding issues ath the bottom and sides. I wanted to return it or trade but i was convinced out of it.
Now i noticed that from left to right their is a prominent yellow tint streaking it's way across and fading around the half way point.It is irritating and sad to see this display on this mac was ok, at first but it is geting slightly worse.I have apple care, can i trade this/replace it at an applestore, or would they need to fix it?
Since upgrading, I can see thumbnails of my pictures in iphoto, but opening them just shows a triangle with an exclamation point.
Info:
IMac Intel Core Duo, Mac OS X (10.4.9)
My mid-2014 15" Macbook Pro randomly "loses" its retina display at the top menu (becomes pixel-y), where the battery, sound, and wifi logos are (on the top right side of the screen). A restart fixes the issue, but I want to know if this is an issue that can be fixed?
Info:
MacBook Pro with Retina display
It's like the LED Cinema Display, it's more of a Triangle shape than the old ones. I know it's a really small thing but it makes it look much better.
View 5 Replies View RelatedI´ve got a magic triangle setup, it seems to be working. I got a 10.7.3 Lion Server that has a bind to my AD and also is operating as OD Master. Then I´ve got a test user in my AD and a MacBook Air connected to AD and my OD, no issues here. Works fine logging on as my testuser to my AD on my MB Air. What I would like to do is to manage some Mac OS settings through my OD, I have two local groups in OD (Mac Users and Mac Computers). I have added my AD user test account to the Mac Users group and also added my MacBook AD computer account to the group Mac Computers.
If I for example edit some settings applied to the user group, lets say that I edit some dock settings, that settings does work and applies when I log in to my AD. But the settings applied on the computer group does not work. I have tried setting some Energy Saver settings to the Mac Computers group but that setting does not go through when I log on to the computer belonging to that group. Any one seen this before, maybe pointing me in the right direction.
Info:
Mac Mini Server, Mac OS X (10.7.3)
In VIEWING (to print) my iTunes music (in finder), how can i view subfolders without clicking on the triangle of each main folder?I am trying to print a list of all my music. For example, main folder is BEATLES. Subfolders are Magical Mystery Tour, Yellow Submarine, Abbey Road, etc...and I want to view and print all the subfolders. This is a recovery project after my hard drive failed. I know this is truly a "finder" question and will double post there.
Info:
ibook, Mac OS X (10.3.9)
I have had my MBP for about 6 months now and decided to treat myself to a game. Being a fan of C&C and Red Alert, I thought I would try the new Red Alert 3 game. I am using the game with the built in trackpad. The problems occured on working out the controls. I have worked out how to use the right mouse function but I am struggling with the following:
ROTATE CAMERA - In the main menu, I go to 'Tutorials', then 'Intro into the Basics', and then I get started with the tutorial. After about the second or third tutorial prompt it talks you through how to rotate the camera using the middle mouse button. MBP do not have a middle mouse button. I have tried every combination of keyboard functions and nothing works.
Can somebody out there help get me through this stage and tell me what I need to press for the middle mouse button function on a MBP?
Alert sound will not work for messages or gmail. tried the ommand-option-P&R hold key on reboot but that did not solve the problem.
Info:
MacBook Air, OS X Yosemite (10.10.1)
each time there is an alert or my macbook ask me a question or a kind of confirmation my screen is flashing once. Someone to know how to disable it?
Info:
iPhone 4, Mac OS X (10.6.8), iphone 4.3.5 and itunes 10.4 (80)
I recently started getting this prompt to get Adobe Flash Player Update on my MacBook Pro with Lion. I downloaded it the first time and now it has got very slow when browsing in Safari. I read about the malware running around, and am a bit worried. I am now getting the same prompt again and wanted to see if it is legit or not to download it.
Info:
MacBook Pro, Mac OS X (10.5.8)
when i plug in headphones or external speaker to the 3.5mm headphone jack i get an alert noise that repeats over and over.
Info:
MacBook Pro, Mac OS X (10.7.3)
My new MacBook Pro runs perfectly. However, it makes the "funk" alert sound effect on a random basis and it is getting pretty annoying. Why is this happening? I am apparently not the only user experiencing this issue, but they did not identify the sound as being one of the built-in sounds.
View 3 Replies View RelatedI'm facing an issue with safari. Every time I try to start the app safari - alert window pops up, and I cannot really close it because when I do, it shows again and again.
Info:
MacBook Air
I just have a quick question for someone who may know a bit more than I do. I remember that usually when I pushed the latch release button on my Macbook Pro, the display lid would pop up so it was easy to open it. Now, however, when I press the release button the lid doesn't pop up at all. This makes it a little bit more annoying to open. Is this normal as time passes? Or should the display lid always pop up?
View 4 Replies View Relatedmy Macbook Pro's display has been acting up. There's these little yellow squares that keeping popping up on my screen while scrolling through something. They then disappear as soon as I scroll up or down again or open a app, tab, etc.
Info:
MacBook Pro, Mac OS X (10.7.2)
storge is full yellow bar is taking up most of it
View 1 Replies View RelatedI've a macbook pro retina display. I see in macintosh hd that yellow folder called "other" is getting bigger and bigger every day. i can't delete any folders because i don't know what they're about. if i open macintosh hd i find (in italian) two folders: "sistema" (maybe system in english) and "utenti" ( users ?). Both are 15Gb. I also see that in my girlfriend's macbook air yellow "other" is empty! how It's possible?
Info:
MacBook Pro, Windows 8
In "About My Apple" under the storage tab, what does the yellow bar "other" mean? Other takes up most of my storage and I'm out of space on my disc so I'd like to trash some things.
Info:
MacBook Air, OS X Mavericks (10.9.2)
I looked through the yellow tint threads and sure enough noticed that my high res AG had it. At first I dismissed it as poor viewing angles. I calibrated the LCD, which seemed to make it a bit better. But it is not a matter of viewing angles. I tried the test on my friend's old blackbook, and when viewing the screen head-on, the bottom square definitely looks yellow, BUT, when tilting the computer back, changing the viewing angle, the square turns white again, thus, a result of viewing angles. The same thing on my HR AG doesn't change the color of the bottom square, it stays yellowish. So I'm pretty much convinced that it's a real issue, at least to some degree.
I'm considering taking it back to the Apple store, or at least going there and seeing how their display models look. Something tells me that nearly all HR AG models (the current shipment that's out right now) suffers from this, and that my replacement will be the same. Does anyone think this is true as well? Should I even bother trying to swap it out? The yellow tint threads have several people that are going through 5-6 exchanges, and all still getting the same problem.
