trying to move photos into files to place on a zip drive. All "events" have moved successfully except for 2 events that will not allow me to move them into a file.When I click on the event in iPhoto gallery, the photos appear at the bottom of my screen but a black screen with a triangle and exclaimation point appears where the enlarged photo should appear?
View 1 RepliesI have been having intermittent trouble with my USB ports on my Early 2011 MBP 13" i7. One port was dead. This started when I upgraded to Lion from Snow Leopard. In order to see if the problem was with the installation of Lion, I cloned my drive with Lion 10.7.3 on it and then reinstalled Snow Leopard OS from the disks that came with the computer. The problem disappeared. I restored the clone of my drive with Lion on it and the problem did not occur again... right away. Now after a day of using the computer with the restored clone with Lion on it, the problem cropped up again, but not as bad as it was before. The port stopped working, but when I unplugged the device and plugged it in again, the port worked.
I am wondering if this could be a driver issue. I just happened to notice that iTunesHelper has a Yellow Warning triangle in the Login Items window in the Accounts System preferences. And Kind is listed as Unknown. In another MBP 13" I use at work, that has Lion 10.7.3 on it, iTunesHelper has Kind listed as Application with no yellow warning triangle.Is this something to be concerned about?
Info:
MacBook
Pro, Mac OS X (10.7.3), MBP 13" i7 Early 2011
My MacBook Air went black and started giving out three warning beeps. How can I restart it?
View 3 Replies View RelatedMy MacBook Pro from 2007 has recently been having a problem where the screen will go black without warning. It's been getting progressively worse, staying black for a few minutes, then staying black for many minutes, and now it can't be woken up (writing this on yet another computer!). I had a similar problem with an iBook from way back when, but can't remember whether I solved the problem by some series of keystrokes or by buying a new computer.
I tried [Apple]+[Option]+[P]+[R] until it start-up chimed, then start-up chimed again. And I tried holding [SHIFT] while it rebooted. I can hear the volume increase and decrease popping-like sound and it reboots fine (as far as I can tell). This MacBook Pro runs Snow Lion (I think).
When I shut down last night before my Mac went off, I got a big black box in the middle of the screen telling me to hold down the power key for a few seconds in 4 different languages. Did that and Mac went off.
Never got that before, what is that?
Running 13" mid 2012 Macbook Air i7 processor 256GB SSD 4GB RAM
Connected to a 27" Thunderbolt Display
When browsing the internet and zoom on photos the screen goes black. This does not happen on my 13" Retina display i5 processor 256GB SSD 8GB RAM, so I do not believe the problem to be my Thunderbolt display.
I have fully updated my software, to ensure I am not missing any essential hot fixes. The Mac was rebuilt on Thursday, so not running any 3rd party software except Microsoft Office.
Info:
MacBook Air, OS X Mavericks (10.9.4), connected 27" Thunderbolt display
An alert box with a yellow triangle keeps randomly popping up on my screen. But I don't have time to read what it says because it disappears in 1 sec. What is it? What can I do to get rid of it?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
If I am scrolling through iphoto, I can see all my pictures, but once I click on most of them, a little triangle with an exclamtion point shows up. I can't see them or send them. Where are my pictures.
Info:
MacBook Air (13-inch Mid 2011)
app for colorizing black and white photos
Info:iMac, Mac OS X (10.7.4)
Using Aperture I converted my album to b&w after I thought I had copied the colour album. When I tried undo the b&w it would only do it for 10 of the 44 photos, then the option to undo wasn't offered..how do I undo the other 34 pictures from B&W to colour?
Info:
iMac (27-inch Mid 2011), iOS 8.1.1
Since upgrading, I can see thumbnails of my pictures in iphoto, but opening them just shows a triangle with an exclamation point.
Info:
IMac Intel Core Duo, Mac OS X (10.4.9)
It's like the LED Cinema Display, it's more of a Triangle shape than the old ones. I know it's a really small thing but it makes it look much better.
View 5 Replies View RelatedI´ve got a magic triangle setup, it seems to be working. I got a 10.7.3 Lion Server that has a bind to my AD and also is operating as OD Master. Then I´ve got a test user in my AD and a MacBook Air connected to AD and my OD, no issues here. Works fine logging on as my testuser to my AD on my MB Air. What I would like to do is to manage some Mac OS settings through my OD, I have two local groups in OD (Mac Users and Mac Computers). I have added my AD user test account to the Mac Users group and also added my MacBook AD computer account to the group Mac Computers.
If I for example edit some settings applied to the user group, lets say that I edit some dock settings, that settings does work and applies when I log in to my AD. But the settings applied on the computer group does not work. I have tried setting some Energy Saver settings to the Mac Computers group but that setting does not go through when I log on to the computer belonging to that group. Any one seen this before, maybe pointing me in the right direction.
Info:
Mac Mini Server, Mac OS X (10.7.3)
FCP X 10.1.2 just completely crashed - showing a white screen of death.
Now after restarting, the event I was working on shows a yellow triangle with an exclamation mark and my project is gone. Not even listed any more.
I have already repaired the hard drive and trashed the flexolibrary file but that didn't work.
Previous versions of FCP X had a backup-folder but in 10.1.2 I can't find it any more. It seems one week of hard work has just vanished.
I have a yellow triangle with an exclamation mark on my event. I was working on it and noticed it when I restarted FCP X. Could be that FCP X was crashing while copying or something. But now I don't get it away. But I looked into it.
The 4 photo's and 1 piece of music were quickly found in the menu left of the timeline. But there are two strange stings going on:
1. Scrubbing through the timeline, at certain points the Beach-ball begins to spin and won't stop. I waited 30 minutes (nothing), restart FCP X (nothing), rebooted (nothing), cleaned with Onyx (nothing): I had to force quit FCP X. I cannot see where it goes wrong, but it's at multiple points.
2. While using "relink files" all went wrong. It found photo's with te same name (but in fact other pictures). I deleted those. I went in the library (within Finder) to the Original Files folder, replaced the aliasses of the files pointing to a _Trash folder within the library. I thought the right pictures were back: no. I've dragged those back from iPhoto into the event, with the music also (from iTunes). There double now, but everything is good... except for the exclamation-mark!
Then I made a new library, dragged the project to the new library: copy used clips except the two options given (proxy en render files?). The new event also got a exclamation mark. I played the whole thing: no crashes, no beach-balls, no red missing clips signs, no yellow exclamation-mark in the Timeline Index.
In the original project I can now scrub little pieces (without spinning beach-balls) and I see the pictures on the timeline (in the preview) but with a yellow exclamation-mark in the index...? It cannot be found in the eventbrowser... how strange is that?
Since the update to Final Cut Pro X 10.1.3 I cannot go back to a previous library. What do I do. I'm afraid if I continue to edit things will go south later on.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9)
In VIEWING (to print) my iTunes music (in finder), how can i view subfolders without clicking on the triangle of each main folder?I am trying to print a list of all my music. For example, main folder is BEATLES. Subfolders are Magical Mystery Tour, Yellow Submarine, Abbey Road, etc...and I want to view and print all the subfolders. This is a recovery project after my hard drive failed. I know this is truly a "finder" question and will double post there.
Info:
ibook, Mac OS X (10.3.9)
I'm looking for a few good ways to transport and use my UMB. I figure buying a hardshell case & a timbuk2 bag seem like a good combo. Question is - which do you guys think is better, the Speck or Incase cases? Anyone have any experiences? I had the Incase hardshell for my old whitebook.
Seemed to work out alright. The other option I thought of was getting the invisible shield. Anyone have any thoughts?
I have a 15 inch Macpro running Mac OS X Lion, version 10.7.3. It keeps shutting down without any warning. The screen just goes black and I have to press and hold the power button for a while till a hear a sound to turn the system off. This is happening like, more than 5 times a DAY.
Info:MacBook Pro (15-inch Mid 2010)
Last night my macbook air turned off without warning and wouldn't turn back on until I tried again this morning. A few weeks ago I had my battery and logic board replaced and since then it the screen has gone blue for a few seconds and then back to normal a few times, (in case this is related at all). Is there something I should do to make sure this doesn't happen again.
Info:
MacBook Air, Mac OS X (10.7.3)
Now this didnt always happen but as of lately my unibody macbook runing Lion has been dying without warning that my battery is low. It doesnt even go to sleep, it completely dies.
Info:MacBook, Mac OS X (10.7.4)
I replaced the battery in my MBP which wouldn't charge or run for more than 1 hour. Now, with the new battery, I have 2 issues:
1--battery status in menu bar does not change. It shows it's at 28% all the time
2--I not longer get a warning that my battery is about to run out.
This is a drag since the computer keeps going to sleep on me because it's run out of juice unbeknownst to me.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Ever since I updated to Yosimite - my MacBook Pro is shutting down many, many times a day w/o warning. How can this be fixed?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.1.x)
I have a MacBook Pro, bought around two months ago.Recently I notice, it gives unknown sound like "Ding" and "Shung" when I am doing nothing with it (I am bad with putting sound in words).No new emails or messages from any softwares I installed.It happens even after I quit all the applications, and it's unpredictable.
View 22 Replies View RelatedWhat do I do if I receive a warning that another device is using my ip address on the macbook air?
View 1 Replies View RelatedSafari and other applications like Skype keep closing without warning. What can I do as this is very unconvenient. I got the following message:
Process: Safari [1251]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
[Code].....
I keep getting this warning that my disk is full, I am unable to download updates and even songs from iTunes. Also in the finder I apparently do not have any files because the my files section is blank. i have cleaned up the download folder and emptied the trash as well as performed a diskrepair. I tried to reinstall the software and was told again that the disk was full....What do I do?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a late 2006 MacBookPro, OSX10.5.8 . The machine will run fine on battrey power to a bout %50 or %60 and then just completely shut down. No going down to %20 or %30 and a warning etc ... This has only started happening in the last month or so. The battery is about a year and a half old, 198 cycles and shows about 3200mAh at full charge. I do understand the batteries in these things are only good for a bout 300 cycles. What I don't get is th lack of warning of any kind.
Info:
MacBook Pro, Mac OS X (10.5.8)
not quite so dire if you clicked this wondering ??? And why is this bing posted on Server forum? Well it happens to be on a server and I am trying to iron out what happens when you completely trash the system and start over. This problem occured in a subdirectory on one folder. It (the triangles ->) are there for all the other folders. However, there is one folder I had on a backup (backup, meaning still being a previous version of Lion) that at one point that any group of folders I place into it. there is no browsing triangle that lets you go down furthur. Yes you can open the folder and go further in, so its not prefs that I am aware of.
At this level...Triangles Here Still? Triangles still here. (Must say in Cookie Monster voice if you've watched the "Cookies done yet" bit you might giggle or at least be mildly annoyed.)
If you browse from this part of the hierarchy you get the expected behavior...Triangles Here Still? Triangles still here. however if you open the folder here is what you get...Triangles Here Still? (uh oh).
[Code]...
Anyway, sorry for the "less professional" candor of this post, but I have kids and a wife, and they think I am boring at times, and I love them - and while I am struggling with this, I am thinking of them, and obviously not with them. Ok Universe, this is where I need you the most: I'm counting on you do to something or say something to make it all better. Ok...Go
Info:
Mac mini, Mac OS X (10.7.4), Lion Server
Have any of you guys had this warning pop up when you fire up your MBP?
The above is false information as my clock, date, and everything is set correctly.
When I'm working, sometimes it goes to sleep without any warning, also with a full battery. It never happens when the magsafe is connected. I noticed that when I wake the macbook again, in the battery icon (top-right), there is a "X" instead of it's capacity%.. Therefore I blame my battery for the random sleep. (the "X" dissapears almost immediately after waking up)
Here is a copy-and-paste of the console log:
Code:
9/05/08 16:25:42 kernel System Wake
9/05/08 16:25:42 kernel Previous Sleep Cause: -60
When I let it go to sleep in a normal way, it says 5 in stead of -60. Does anyone knows the meaning of the -60? Google doesn't..
