Final Cut Pro X :: 10.1.2 Crashes - Library Corrupt / Yellow Triangle
Jun 28, 2014
FCP X 10.1.2 just completely crashed - showing a white screen of death.
Now after restarting, the event I was working on shows a yellow triangle with an exclamation mark and my project is gone. Not even listed any more.
I have already repaired the hard drive and trashed the flexolibrary file but that didn't work.
Previous versions of FCP X had a backup-folder but in 10.1.2 I can't find it any more. It seems one week of hard work has just vanished.
View 12 Replies
ADVERTISEMENT
Sep 3, 2014
I have a yellow triangle with an exclamation mark on my event. I was working on it and noticed it when I restarted FCP X. Could be that FCP X was crashing while copying or something. But now I don't get it away. But I looked into it.
The 4 photo's and 1 piece of music were quickly found in the menu left of the timeline. But there are two strange stings going on:
1. Scrubbing through the timeline, at certain points the Beach-ball begins to spin and won't stop. I waited 30 minutes (nothing), restart FCP X (nothing), rebooted (nothing), cleaned with Onyx (nothing): I had to force quit FCP X. I cannot see where it goes wrong, but it's at multiple points.
2. While using "relink files" all went wrong. It found photo's with te same name (but in fact other pictures). I deleted those. I went in the library (within Finder) to the Original Files folder, replaced the aliasses of the files pointing to a _Trash folder within the library. I thought the right pictures were back: no. I've dragged those back from iPhoto into the event, with the music also (from iTunes). There double now, but everything is good... except for the exclamation-mark!
Then I made a new library, dragged the project to the new library: copy used clips except the two options given (proxy en render files?). The new event also got a exclamation mark. I played the whole thing: no crashes, no beach-balls, no red missing clips signs, no yellow exclamation-mark in the Timeline Index.
In the original project I can now scrub little pieces (without spinning beach-balls) and I see the pictures on the timeline (in the preview) but with a yellow exclamation-mark in the index...? It cannot be found in the eventbrowser... how strange is that?
Since the update to Final Cut Pro X 10.1.3 I cannot go back to a previous library. What do I do. I'm afraid if I continue to edit things will go south later on.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9)
View 2 Replies
View Related
Aug 30, 2014
I store all my libraries on an external hard drive and today my dad unplugged it without ejecting it. When I went to reopen it it said it was corrupted and will no longer open in final cut. in fact, it just crashes final cut. I have a video editing business and have hours worth of work in the library.
View 3 Replies
View Related
Apr 3, 2012
An alert box with a yellow triangle keeps randomly popping up on my screen. But I don't have time to read what it says because it disappears in 1 sec. What is it? What can I do to get rid of it?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 13, 2012
I have been having intermittent trouble with my USB ports on my Early 2011 MBP 13" i7. One port was dead. This started when I upgraded to Lion from Snow Leopard. In order to see if the problem was with the installation of Lion, I cloned my drive with Lion 10.7.3 on it and then reinstalled Snow Leopard OS from the disks that came with the computer. The problem disappeared. I restored the clone of my drive with Lion on it and the problem did not occur again... right away. Now after a day of using the computer with the restored clone with Lion on it, the problem cropped up again, but not as bad as it was before. The port stopped working, but when I unplugged the device and plugged it in again, the port worked.
I am wondering if this could be a driver issue. I just happened to notice that iTunesHelper has a Yellow Warning triangle in the Login Items window in the Accounts System preferences. And Kind is listed as Unknown. In another MBP 13" I use at work, that has Lion 10.7.3 on it, iTunesHelper has Kind listed as Application with no yellow warning triangle.Is this something to be concerned about?
Info:
MacBook
Pro, Mac OS X (10.7.3), MBP 13" i7 Early 2011
View 2 Replies
View Related
Sep 4, 2014
I am unable to open a FCPX library (containing at least 10 projects and events). Final Cut attempts to load the events and projects in the library but after about 5 minutes the program shuts down and I get an Apple message giving me the option to report the problem.
All other libraries appear to work fine. I am guessing that the last project created within the affected library is corrupt. i have tried removing the render files in that last p and I have copied the library to another drive and neither worked.
Info:
MacBook Pro, OS X Mavericks (10.9.4), Processor - 2.2 ghz intel core i7
View 1 Replies
View Related
Sep 4, 2014
I am unable to open a FCPX library (containing at least 10 projects and events).
Final Cut attempts to load the events and projects in the library but after about 5 minutes the program shuts down and I get an Apple message giving me the option to report the problem.
All other libraries appear to work fine. I am guessing that the last project created within the affected library is corrupt.
I have tried removing the render files in that last project and I have copied the library to another drive and neither worked.
Info:
MacBook Pro, OS X Mavericks (10.9.4), Processor - 2.2 ghz intel core i7
View 1 Replies
View Related
Jun 24, 2014
I was editing a music video last night and finished the edit. I then began to do my color grading. I use Magic Bullet Looks and was using Neat Video Noise Reducer as well. Nothing out of the norm as far as my workflow goes. I got about half way finished with color and turned my computer off when i went to bed. This morning when i reopened fcpx the project loaded but showed a few spots of the timeline that needed to render (the orange bars). BUt once i clicked inside my timeline fcpx froze and i would have to force quit the program.. I have tried uplugging the drive that the events and projects are saved on and opening fcpx that way..it works and other projects from other drives are working fine but when i plug the drive with the corrupted project it loads the project in the timeline but still freezes every single time i click in the timeline and the render percentage is stuck at 0%....Every once in a while when i try it will render about 9 to 30 % then freeze again..
-USING FCPX 10.1
-2011 iMac
-2.5 GHz Intel Core i5
-4 GB 1333 Mhz DDR3
-OSX 10.9.2
View 1 Replies
View Related
Dec 9, 2014
I have been working on a project for school fine until today. When I tried to resize the FCPX layout I got a white screen and then it crashed and I had to force quit it (see image).
Having tried to reopen it I just get the beach ball and have to force quit each time. I have tried other macs in the room and it is the same. Other projects appear to open fine, so it seems that a file with the project might be corrupt?
I have attached images of the package contents . The school system is set up so that we have to save on external drives and any work on the mac is wiped as soon as you log out so auto saves are a no-go
Info:
iPad
View 1 Replies
View Related
Aug 24, 2014
I have an event file that when selected crashes the app. I don't need it, but cannot select it to delete it.
I opened the package contents of the Library and found the offending file, and successfully moved it to my trash. However, it still appears in the event list when I restart FCP X (version 10.1.3). I have attempted to close the library and reopen it, close the app and reopen it, but still it persists.
Is there a way to force the library to rebuild itself, or something else that will remove it from the event list? (FYI it appears with a warning triangle).
Info:
MacBook Pro (15-inch Core 2 Duo), OS X Mavericks (10.9)
View 5 Replies
View Related
Dec 6, 2014
removing a corrupt iPhoto Library.
The file suggests it is 500Gig in size, and no matter what i try i can't delete it
What i have tried
Deleting it through the trash can - system just hangs
Deleting using OmniDiskSweeper, using this app it suggests the file size is 11Gig, but when you ask it to trash it again just hangs
Running disk verify and repair to see if that would resolve the problem
Repair the file by holding down Command and Option while opening in iPhoto - it brought up an error message and would not let me proceed
I have even tried deleting using Terminal with no success, however in saying that i am a beginner using this launguage
At the moment my Mac thinks its occupying 50% of my hard drive space, i know it not that size, but i am at my wits end
Note i am running the latest software, and i no longer require this file
Info:
iMac, iOS 8.1.1
View 4 Replies
View Related
Aug 27, 2014
I have a MAC V10.9.4 and my FCPX 10.0.8 crashes every time I open it and lasts about 10 seconds. I am making a video reel so there are a lot of different types of videos in it and chopped up into smaller scenes to create a collage of my achievements. Now halfway through, I can't complete it because it keeps crashing and it super annoying because I have a few days to complete.
I have below the code.
Process: Final Cut Pro [407]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCut
[Code].....
View 2 Replies
View Related
Jun 30, 2014
I just purchased FCPX but it crashes every single time I attempt to open the effects panel. I have verified my system is qualified, tried removing preferences, restarting, even reinstalling the application per Apple's support docs. Nothing fixes it. The crash happens on both 10.9.3 and 10.9.4, and ProApps Codecs are installed.
View 10 Replies
View Related
Aug 28, 2014
I upgraded to FCPX 10.1.3 with no issues. Libraries loaded and all was well. I drag and dropped a video on the timeline and FCPX stalled, then crashed. Now, when I attempt to open it up it loads the libraries, sits for a few minutes and then crashes.
I have repaired permissions.
Trashed FCPX preferences.
Ran a maintenance program (Onyx)
I have a Time Machine backup that I accessed and brought 10.1.2 back into my apps folder (so now I have both). When opening 10.1.2 it asks to import my libraries. If I do this will I lose data or will it ruined my libraries. My only backup of the FCPX libraries is an online backup (backblaze) and will take years to restore.
2 Questions:
1. How do I troubleshoot my issue with 10.1.3?
2. Can I downgrade (already on my system) to 10.1.2 and when I import libraries that have been imported to 10.1.3 into 10.1.2 will Iose data?
Processor: 2.93 GHz Intel Core i7
Memory: 24GB
Storage: 1TB internal, 9 TB external (FCPX scratch disk is a 4TB GRaid)
OS: Mavericks 10.9.4
Here is the crash report:
Process: Final Cut Pro [1967]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCut
Version: 10.1.3 (251130)
[Code] ....
View 14 Replies
View Related
Jun 23, 2010
Because of the many problems I heard about using FCS3 with Snow Leopard when they both first came out, I've held off upgrading my OS from 10.5.8. Now that some time has passed, is it safe to install Snow Leopard without worrying about freezes and crashes with using Final Cut Studio 3? Also, have most of the 3d party software developers updated their apps for 10.6? I'd like to install Snow Leopard for my other apps but not at the expense of FCS.
Information:
MacBook Pro Core Duo 2 2.16 Mhz
Mac OS X (10.5.8)
View 2 Replies
View Related
Jul 4, 2009
Alu 24" 2.4ghz when they first came out with aluminum, got it at the store. since august 07 My imac had a small yellow tint, i noticed, when i got it and it was not worth anyhting screaming about, i also noticed it had bleeding issues ath the bottom and sides. I wanted to return it or trade but i was convinced out of it.
Now i noticed that from left to right their is a prominent yellow tint streaking it's way across and fading around the half way point.It is irritating and sad to see this display on this mac was ok, at first but it is geting slightly worse.I have apple care, can i trade this/replace it at an applestore, or would they need to fix it?
View 9 Replies
View Related
Sep 12, 2014
Trying to backup my library in fcp x, followed the instructions on how to do so, but then I get an error saying There isn’t enough disk space to Consolidate Library Files. How much space do I need?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2)
View 3 Replies
View Related
Jun 3, 2014
I inadvertently changed the Library name of an FCP X file in the Finder Window and now FCP X won't open. I immediately changed it back to the original name, and FCP X still won't open. The FCP X logo comes up, and then the app seems to freeze and not open.
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
View 13 Replies
View Related
Aug 22, 2014
We have ordered and installed FCP X .....except on 2 machines we are unable to create new libraries. When I click on File, it only gives us options to create a New Project or New Event.
Info:
Final Cut Pro X, OS X Mavericks (10.9.2)
View 1 Replies
View Related
Jun 25, 2014
When I click the little triangle next to the event in the library, it spins downward and no video files show. It's my second project for a new company and on a brand new computer with a new install of final cut pro X and glitches are already starting to show.
View 1 Replies
View Related
Sep 7, 2014
I have a lot of storage space on my computer, but i still can't start a new project. I do command N or File --> New Project and it just makes a sad little bloop and doesn't do anything. It doesn't give me message or anything on why i can't start a new project.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 2, 2014
I have one library that I am unable to open. It worked fine yesterday but now it just hangs with a message 'Loading "XYZ" event'. Even its backups in the Movies folder won't open. All the other libraries I've tried to open do so without any problem, so it seems the trouble is restricted to this one library and its backups.
View 8 Replies
View Related
Dec 10, 2014
I have a strange thing happening when I attempt to update a Final Cut Project and Event from FCPX 10.9. I'm choosing to update manually. When I tell FCPX to go ahead and update, everything looks like it is happening as planned - except that inside of Final Cut the Project files are no where to be found. I know Final Cut is supposed to put them into an Event created especially for the old Projects. But when I look for it there are no project files. When I look at what actually took place at the finder level I find that all the Events have been moved just fine but the old Project Folder is left alone and still intact. 
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
View 10 Replies
View Related
Jun 3, 2014
I updated everything to FCPX 10.1.1.
Some clips became unlinked. I go to link them ... and am stopped dead by the NEW Library Icon (with all it's internal folders no longer seemingly accessible). I know the file is in there - if I do a search in Finder for the missing media, it takes me right to where it is.
When I do a relink, stopped dead in my tracks by the new format. How do I access the folders hidden in the new Project Library to relink my clips with their original media?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
View 8 Replies
View Related
Dec 8, 2014
Working on an iMac with a FCX library that links to an external media folder which has all my video. I'm not using managed media, but external links to the video source footage.
I make an exact duplicate copy of my FCX library on a USB drive, including the external media folder with all my video clips -- using the same folder structure and everything, But when I move that to another computer (MacBook Pro), open the exact same FCX library, open the same project -- I get missing links on every clip on my timeline. The library doesn't connect to the external media folder.
Re-linking causes an error and doesn't work either. The FCX library just won't take my "external media" folder which it links to fine on my iMac. All my projects on my MacBook Pro, have red "missing file" icons instead of the clips.
Running FCX 10.1.4. and Yosemite.
Info:
iMac, OS X Mountain Lion
View 9 Replies
View Related
Jun 1, 2014
Fcpx editing error, library not open，The backup file is not open。
View 1 Replies
View Related
Dec 2, 2014
I am trying to import a library of my Mac Book Pro to My Imac (FCPX 10.1.3).
When I try to open it in my iMac, all the clips are ok in the browser but the project is not working, see image ....
View 6 Replies
View Related
Dec 9, 2014
FCPX says media is missing, but "show package contents" on the library file shows all of the media where it is supposed to be. How do I make FCPX see the media?
Info:
iMac
View 2 Replies
View Related
Aug 30, 2014
I have tried to copy a consolidated library (156GB) to another drive. I have tried this twice and everything seems to be there, however when I play the project, the sound drops out in many places. (Both dialog and music tracks) Is there a way to copy the library to a new drive and not have problems? Should I "copy events to to a new library"?
View 11 Replies
View Related
Jun 28, 2014
i can copy events but not move events in fcpx to a different library (archive) why?
View 1 Replies
View Related
