Software :: Powerbook G4 That Will Not Recognize The Install Disk?
Apr 19, 2009
I have a situation which seems somewhat unique to what my searches have uncovered. I have a powerbook g4 that will not recognize the install disk it came with. The version is 10.2.7
The Powerbook was working just fine with 10.4.11 when I tried to downgrade Quicktime using Pacifist. I must have done something wrong because the Powerbook turned into a brick. I was able to boot onto my tower G5 and back up all my important data, I then reformatted the drive to mac os journaled and zeroed it. The problem I am having is that when I try to boot from the original install disc I get an error on gray screen that says "You need to restart your computer" Sometimes it doesn't even get this far, it just shows the apple logo and then the screen goes buggy and the machine powers down.What I currently have at my disposal is a G5 tower running 10.4.10, three 10.3 install discs that came with the tower, a burned copy of 10.4, and the Powerbook's original 10.2.7 install disc.
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
I am going to install a new SSD drive on my MBP mid-2009. After it is installed, can I then start up computer and then insert the DVD Install operating system disk, or do I install the DVD install disk, then shut down computer and swap the HD drive? I know that I will reformat the disk when Installer begins, but I want to know if the computer will recognize the install disk with a new blank HD in place.
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
As the title says, I've got a 15" 1.67 GHz Powerbook. I ordered a new RAM card off OWC a while ago, and just got around to installing it now. The card specifications are as follows (taken from the order invoice): SO-DIMM 1.0GB Samsung Factory PC2700 DDR 333MHz 200 Pin SO-DIMM Module M470L2923BN0-CB3 S/N: 4150092 I opened the panel in the middle of the computer's underside, aligned and slid the card into the top slot, then pushed it down and closed the computer back up. I turned the computer on a few minutes ago, only to see that it was still only recognizing 512 mb RAM. Can anyone tell me what I did wrong, or what the deal is? On the Apple website, it lists a procedure for installing Powerbook RAM that involves removing the keyboard, which I did not do, because I don't think that applies to my model.
I recently inherited a Pismo, 400 mhz and a 6gb hard drive. Other than the tiny hard drive, the computer is in great shape and has a lot of service left in it. I was able to load Tiger on it, and it's working fine. I replaced the hard drive with a 100gb Seagate, but when I tried to format the disk,the new hard drive didn't show up during installation attempts. However, the volume was visible in the system profiler and the disk utility...I reinstalled the original hard drive, and that booted successfully so I guess that means I didn't damage the hard drive cable, which I had feared. Does anyone have an idea about this? So odd that that I could locate the drive in the disk utility but not at the installation screen.
My powerbook G4 recognizes my IPod cable and printer cable through the USB ports, but won't recognize any USB sticks or card readers. Any idea what is wrong, and hints for how to fix it?
I just recently installed an internal seagate ultra ata 100 80gb hd into my powerbook g4 (the old one crashed beyond use). I hear the drive spinning when I boot up the computer. However after the computer boots up with the original boot disk that came with the computer and I try to format it using disk utilities, it does NOT recognize my hard drive (e.g. the hard drive doesn't come up on the list of drives to fix).
I inserted a DVD-R into my iMac (which I know contains pictures, viewed on PC) but it only recognizes the disk as being blank. My machine responds exactly as I assign it to when a blank disk is inserted so I'm assuming the problem is not with my iMac but rather the format of the disk. I do not know which platform the disk was created with nor the type of machine. However, as I stated, I do know for a fact that this disk contains photos as Ive viewed them on a PC.
I connected Lacie Backup Disk and used Time Machine to select the disk. But then a warning popped up telling me to eject the disk properly next time before disconnecting it, even though I never disconnected the device. Now time machine does not even recognize it.
I recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
I am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognize de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
I'm having a problem with my Powerbook G4. I kind of screwed up my drivers because I was an idiot and tried to get some Intel drivers to work on the computer through some cheat thing and now my computer won't boot up. I have an install disk but when I try to reinstall it keeps saying that I need Mac OSX Install Disk 2. I never had to use disk 2 before and I never had one to begin with.
So I recently upgraded my PBG4 1Ghz TiBook from 10.3 to 10.5, and I've had a bunch of problems crop up.
1. Network issues. As part of the upgrade, my Airport Extreme and Airport Express were updated too. Now Airport Utility doesn't see my AEBS or my AEX half the time (or will see one but not the other) unless I plug in using the ethernet port. Also, signal strength seems to have degraded considerably. I'm typing this with about 6 feet between my computer and my base station, and I only have three of four bars. At my couch, I used to receive four bars, but now only two. Previously, I was able to roam my house without dropping below the full four in any location.
2. Embedded videos. Gone. Can no longer see video streams on news sites, youtube videos embedded in web pages, and the like.
3. iPhoto. Dead. Do I need to purchase iLife separately? I thought this was included with previous versions of OS X?
4. Laptop speakers. Dead. iTunes plays music, but only the occasional crackle emerges from the speakers.
5. Time Machine. Doesn't work with my external HD.
I bought a new 320gb HD to put in my PB G4 "ti" and a new external case to drop the old 60mb HD into when all is said and done.
What would happen if I put the new 320mb HD into the external case, connected it to the PB then dragged and dropped the old 60mb HD onto the 320mb HD to copy it.
Then swapped out the drives. Would the PB start up from the new 320mb HD?
I know that there are other ways of doing this, and I've tried a few, but having problems with the normal and conventional ways!
My OS 10.4 install disk is damaged. And for some reason SuperDuper hangs up in cloning the 60 HD to the 320 HD.
I recently purchased a MBP and a Time Capsule. Still waiting on the MBP, but went ahead and set up the TC as a router for my current Dell laptop. In theory, I don't really care since I will have my MBP w/in 2.5 weeks, but is it possible for my Windows machine to see the disk on the TC? I went into TC and set up the workgroup name to be the same as the workgroup on my PC, but I still don't see it. I doubt anyone has done it, but was curious if it's possible. I assume that the Windows client should be able to access that giant disk (or a Windows user would never buy the product). One question though, it shows the filesystem as FAT32. Is that right, or just how it's represented to the Windows client?
I am running OS 8.6 and have installed the iomega ware for classic on it (I believe the driver is 6.2.3). The drive will power on when I insert the drive. The drive is recognized by the Iomega Tools but will not recognize when a disk is inserted. The drive does not even try to spin up when a disk is inserted. Iomega tools says no disk is inserted. The only way to eject the disk is to put a paperclip in the "emergency eject" hole.
My macbook hard drive crashed, luckily I had just backed up everything. I went and bought a new 320 GB hard drive, I researched and I know it's compatible with my Macbook. I decided to install windows 7 on it first, but the windows 7 installer wouldn't recognize my hard drive. (For the record, my Matsushita superdrive will not read DVDs anymore, only CDs, so I created bootable copies of both my Mac OS X install disk and my Windows 7 install disk, and I've been using a bootable rEFIt CD to boot from my USB flash drive.)
So I booted up the Mac OS X Snow Leopard disk and started disk utility - it recognizes the rEFIt CD, it recognizes the flash drive, but no internal hard drive. The partitioning tool in rEFIt doesn't recognize it either, but I know it's seated correctly because I can hear/feel it booting up with the computer (if i remove the battery and boot with the computer plugged in). I also know it works correctly because I installed it in my girlfriends PC and it recognized it just fine, I even installed Windows 7 on it, hoping the macbook would boot from it.
Could really use some advice on a PowerBook problem! Unfortunately the PowerBook in question (12" G4) belongs to my mum who lives a fair distance away, so I've not been able to do any 'hands on' diagnostics. Basically she was using the machine yesterday when it randomly started emitting a high pitched squeaking/scratching sound (she described it as screaming though, bless). She called me and I asked her to turn it off - gave it a couple of minutes and asked her to try turning it on again. When she did the computer immediately started making the same noises (even before the startup 'bong' sound). Today one of her friends who is a little tech savvy took a look at it, and figured it must be the hard drive. Fortunately he was able to retrieve all of the important data from the computer whilst enduring ear-splitting screeching.
1. Does it sound like the problem really is the hard drive? It does to me, though I'm not an expert - however would hate to waste money on a replacement drive to find out that wasn't the problem in the first place.
2. Is it worth replacing the drive? Any idea how much it would cost to replace the disk? Is it something that could be done by myself, or would we need to find a specialist repair person to do it? Would it likely be more cost effective to get a new laptop?
The money issue is pretty key as she's in something of a tight spot at the moment, so trying to find the cheapest solution that will get her computer working again asap. As she lives in a rural area and is housebound her laptop is very much a lifeline for her, so would be good to get it sorted.
Now, from what googling I've done, it seems the only way to fix this is a fresh install. Only one problem - it will not boot the install disc when I hold "C" at power up.
I've already done the reset (remove battery, hold power 5 sec) and also reset PRAM. Neither of these helped the system recognize the disc.
I just bought the newest 13 inch MacBook Pro. I've read over all my specs and stuff it looks to be compatible with my macbook but every time I try to install it as a trial it just comes back with a message "unable to recognize" so does that mean its not compatible?
my brother got a new macbook and im running a powerbook g4 still on tiger can i use his os install discs to upgrade to leopard? or will it wipe my computer clean and install it on a clean slate?
I already have a Macbook Pro, but I am looking at buying a cheap, used powerbook on eBay as a new "beater" machine. I found a nice one, except the superdrive is dead. If I were to buy it I would want to do a clean install of Leopard, requiring an optical drive. My question is: would I be able to share the superdrive of my Macbook Pro to the Powerbook as if it were a Macbook Air?
