Intel Mac :: It Does Not Recognize Disk Containing Photos
May 14, 2012
I inserted a DVD-R into my iMac (which I know contains pictures, viewed on PC) but it only recognizes the disk as being blank. My machine responds exactly as I assign it to when a blank disk is inserted so I'm assuming the problem is not with my iMac but rather the format of the disk. I do not know which platform the disk was created with nor the type of machine. However, as I stated, I do know for a fact that this disk contains photos as Ive viewed them on a PC.
Info:iMac, Mac OS X (10.7.3)
View 2 Replies
ADVERTISEMENT
May 20, 2012
I just bought an iMac. It is unable to recognize photos stored on my old pc in jpeg format. When I try to e mail them, the iMac simply shows a blank page, and when I try to import them from a thumb drive the iMac doesn't even see them on the drive.
Info:Mac OS X (10.7)
View 6 Replies
View Related
Aug 23, 2014
I have a mid-2010 iMac. Recently, it has failed to mount DVDs, either video or data, on a reliable basis. I have been able to work around it by restarting my iMac, but that doesn't always work.
Info:
iMac, OS X Mavericks (10.9.4), mid-2010 model
View 3 Replies
View Related
Jun 23, 2012
I'm trying to switch photos from my phone onto my computer easily and my mac does not recognixe my iPhone.emailing myself all the photos - which is time consuming.
Info:
MacBook, Mac OS X (10.4.11)
View 2 Replies
View Related
Jun 9, 2012
I connected Lacie Backup Disk and used Time Machine to select the disk. But then a warning popped up telling me to eject the disk properly next time before disconnecting it, even though I never disconnected the device. Now time machine does not even recognize it.
Info:
Mac Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
May 12, 2009
I recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
View 2 Replies
View Related
Jul 9, 2010
I am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies
View Related
Mar 13, 2009
My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
View 3 Replies
View Related
Apr 19, 2009
I have a situation which seems somewhat unique to what my searches have uncovered. I have a powerbook g4 that will not recognize the install disk it came with. The version is 10.2.7
The Powerbook was working just fine with 10.4.11 when I tried to downgrade Quicktime using Pacifist. I must have done something wrong because the Powerbook turned into a brick. I was able to boot onto my tower G5 and back up all my important data, I then reformatted the drive to mac os journaled and zeroed it. The problem I am having is that when I try to boot from the original install disc I get an error on gray screen that says "You need to restart your computer" Sometimes it doesn't even get this far, it just shows the apple logo and then the screen goes buggy and the machine powers down.What I currently have at my disposal is a G5 tower running 10.4.10, three 10.3 install discs that came with the tower, a burned copy of 10.4, and the Powerbook's original 10.2.7 install disc.
View 1 Replies
View Related
Dec 5, 2014
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognize de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
Info:
MacBook, OS X Mavericks (10.9.5)
View 1 Replies
View Related
Mar 8, 2008
I recently purchased a MBP and a Time Capsule. Still waiting on the MBP, but went ahead and set up the TC as a router for my current Dell laptop. In theory, I don't really care since I will have my MBP w/in 2.5 weeks, but is it possible for my Windows machine to see the disk on the TC? I went into TC and set up the workgroup name to be the same as the workgroup on my PC, but I still don't see it. I doubt anyone has done it, but was curious if it's possible. I assume that the Windows client should be able to access that giant disk (or a Windows user would never buy the product). One question though, it shows the filesystem as FAT32. Is that right, or just how it's represented to the Windows client?
View 19 Replies
View Related
Oct 19, 2009
I am running OS 8.6 and have installed the iomega ware for classic on it (I believe the driver is 6.2.3). The drive will power on when I insert the drive. The drive is recognized by the Iomega Tools but will not recognize when a disk is inserted. The drive does not even try to spin up when a disk is inserted. Iomega tools says no disk is inserted. The only way to eject the disk is to put a paperclip in the "emergency eject" hole.
View 3 Replies
View Related
Nov 3, 2009
I am going to install a new SSD drive on my MBP mid-2009. After it is installed, can I then start up computer and then insert the DVD Install operating system disk, or do I install the DVD install disk, then shut down computer and swap the HD drive? I know that I will reformat the disk when Installer begins, but I want to know if the computer will recognize the install disk with a new blank HD in place.
View 7 Replies
View Related
Apr 13, 2010
My macbook hard drive crashed, luckily I had just backed up everything. I went and bought a new 320 GB hard drive, I researched and I know it's compatible with my Macbook. I decided to install windows 7 on it first, but the windows 7 installer wouldn't recognize my hard drive. (For the record, my Matsushita superdrive will not read DVDs anymore, only CDs, so I created bootable copies of both my Mac OS X install disk and my Windows 7 install disk, and I've been using a bootable rEFIt CD to boot from my USB flash drive.)
So I booted up the Mac OS X Snow Leopard disk and started disk utility - it recognizes the rEFIt CD, it recognizes the flash drive, but no internal hard drive. The partitioning tool in rEFIt doesn't recognize it either, but I know it's seated correctly because I can hear/feel it booting up with the computer (if i remove the battery and boot with the computer plugged in). I also know it works correctly because I installed it in my girlfriends PC and it recognized it just fine, I even installed Windows 7 on it, hoping the macbook would boot from it.
View 8 Replies
View Related
Apr 9, 2012
I recently tried to upgrade my original 160GB HDD to a 500GB Scorpio Blue. I formatted the drive to HFS+ and installed Lion on it while it was in an USB enclosure.When i restart the computer, HDD boots off of the enclosure and it is fully functional and I can view it and my original drive.However, whenever I take my new HDD out of the enclosure and install it into my mbp all it gives me is the flashing ? error and it is not visible in boot utility either. I've tried everything I can think of to get this to work. I don't believe it is the HDD seeing as it can boot off the enclosure. What exactly are my options to fixing this issue?
Info:
MacBook
Pro, Mac OS X (10.7.1)
View 4 Replies
View Related
Jun 13, 2012
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
View 1 Replies
View Related
Dec 12, 2014
I have this issue in both macs I own, a 2010 MBP, and a 2012 Mac mini. After I upgraded to yosemite, Time Machine will not find my backup disk. I have been using the same network attached storage drive for 4 years for time machine backups. I has worked fine with all the macs I've owned until now. I can see the disk in Finder, I can go to disk utility and mount the Time Machine disk, but when I go to Time Machine preferences and try to select the list, the disk is not listed there, even though is mounted.
View 3 Replies
View Related
Sep 2, 2014
My hard disk is a Raid system. 4x3TB = total 12TB but 3 TB is for backup. So in effect usage space is 9TB. But now used up 7TB (called it original harddisk) I took my iMac to a shop and it dis some verify and tried to repair the disk using Disk Utility. But it cannot repair. Apparently, he said that my hard disk is okay but it has a directory corrupt problem. That is why now my FCPX cannot read all the data. All my media files for FCPX are stored in this 9TB external hard disk. So, I was told the steps to do are:Â
1)Â copy all these 7TB data from Original hard disk into a new hard disk (called it haddisk B).Â
2) Then reformat the old 9TB hard disk (which we earlier called as original hard disk).Â
3) Then I copy back from hard disk B into Original Harddisk 9TBÂ Question is will FCPX be able to recognise again my media files from the Original hard disk in
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
View 4 Replies
View Related
Apr 10, 2012
I got an enormous external hard drive and it worked fine for a week or two, but now I am getting "start up disk is full" again-which is impossible-but obviously I am doing something wrong. This is so incredibly frustrating. I cannot even download new photos! If it can't be resolved, my new found love of Apple Macbook may return to reliable PC!!
Info:
iPhoto '11, Mac OS X (10.6.8)
View 7 Replies
View Related
May 8, 2012
how can i transfer photos to an external hard disk?
Info:
MacBook Air, Mac OS X (10.6.8)
View 1 Replies
View Related
Jan 24, 2010
I know this is a reoccurring question, but I haven't found the answer to this specific flavour of it, so I hope you can help. I'm using iphoto 09. After initially using it with default setup, I've now unticked the 'Copy items to the iphoto library' in preferences.I've got an external (NAS, one that is plugged in the router) harddrive with all my photos on it. I didn't want to pull them into a library on my mac, and putting the iphoto library onto the NAS drive didn't work either (it wouldn't load the thumbnails). So I've decided to leave the photos where they are and point iphoto to them without importing them (by unticking that box I mentioned, which was described in another post). Deleting however is a problem. Ideally I would hope I can delete a photo in iphoto and it would be deleted on the NAS drive as well. I've read all the posts about deleting and then emptying the iphoto trash, which I did. I pressed all sorts of keys when deleting (cmd, alt, ctrl, shift etc. - didn't work either.
View 3 Replies
View Related
Jun 17, 2014
My iPhoto is empty, however when trying to upload some photos from an SD card, I get the message, "Insufficient Disk Space. iPhoto cannot upload your photos because there is not enough disk space in the volume containing your iPhoto library."
Info:
iPhoto '11, iOS 7.1.1
View 10 Replies
View Related
Feb 19, 2012
I just purchased a Seagate "GoFlex Desk" 2 TB External Drive. It is recognized just fine in my MacBook Pro (Early 2011). When I plug it into my Intel iMac (2009?), it is not recognized. Both machines are running Lion. The box says the disk is "USB 3.0 + USB 2.0". I tried an iMac USB port that is functioning fine with another USB 2 drive. Â
Info:
iMac, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 5, 2012
I have just recently bought the Mid 2011 IMac. I put in a DVD disc into the side slot, and my IMac did not even recognize that it was in there. Now it is stuck in the slot and won't come out. I have tried the Eject button on ITunes, and the Disk Utility Eject won't work since it does not recognize that there is a disc in there. I can't drag the disc to the trash can either because it doesn't show up on my Desktop. Also, the Terminal Eject won't work either.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 9, 2012
my iMac 'sees' my PC on the local network and can access all files etc, my PC cannot 'see' m.
Info:
iMac, Mac OS X (10.7.3), PC has XP operating system
View 2 Replies
View Related
Apr 13, 2012
These are the steps I followed to connect my iMac to my HDTV with an HDMI cable (via a Rocket Fish Mini DisplayPort to HDMI adapter):Â
1) Turned off TV
2) Turned off iMac
3) Plugged in HDMI cable into TV
4) Plugged in HDMI cable to RocketFish Mini DisplayPort to HDMI adapter5) Turned TV back on6) Turned iMac back on7) Enabled TV's HDMI port8) Detect Displays When the TV is ON, the display is not recognized. When I turn the TV OFF, the iMac will switch and recognize the TV display.Â
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
View 5 Replies
View Related
May 2, 2012
When I insert a DVD it nothing happens. I hear it spin for a few seconds and then it is ejected. Will not launch DVDPLayer or start playing if I open DVDPLayer. MUsic CDs work fine. Is this a hardware failure or can I try some
Info:iMac (27-inch Late 2009), Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 22, 2012
Just bought a Samsung Galaxy S3 but am truly unable to get my iMac to 'see' the phone when connected via USB.
I'd really like to sync itunes to the phone. I've tried using the app Easy Phone Sync but no joy with that either.Â
Info:
iMac
View 6 Replies
View Related
Jun 22, 2012
My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button.
Info:
iMac, Mac OS X (10.7.4)
View 5 Replies
View Related
Feb 11, 2012
I have read most things to do with the grey screen and the screen with the question mark, and it's obvious I have to put some sort of disks in, but there is already a disk stuck in the drive?
Info:
iMac
View 5 Replies
View Related
