MacBook Pro :: Launch Disk Utility From The Snow Leopard Install Disk?
May 15, 2012How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
ADVERTISEMENT
OS X V10.6 Snow Leopard :: Cannot Get To Disk Utility From Install DVD
Apr 2, 2012My HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion?I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
Info:MacBookPro, Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: No Destination Volume Available In Disk Utility Or Install Screen
Jul 2, 2012I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: Run Time For Disk Utility's Repair Disk Function
May 14, 2012Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
OS X V10.6 Snow Leopard :: Disk Utility's Repair Disk Permissions Messages
Jun 12, 2012I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: Disk Utility Cant Repair Disk
Jun 8, 2012please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
MacBook Pro :: Disk Utility Keeps Crashing On Launch
Jun 20, 2012I have a new macbook pro 15.5 and had it for 3 months after which the hard drive crashed. There goes the illusion that nothing ever happens wrong with apple... especially my first one which I treated like a baby. So it was taken into a support center, they cloned my hard drive and ordered a new one... 22 days later I get my mac back and everything seems in order. Except when I run Disk Utility it keeps crashing. Funny enough when I run it from Recovery mode from boot its fine. But when logged into the OS (Lion) it launches and starts gathering information.Then crashes and I get the submit fault dialogue..Anyway here is the log. I have run Onyx, applejack etc but the problem has not been resolved.[code]
Info:
MacBookPro, Mac OS X (10.7.3)
Software :: Cant Launch Disk Utility 10.4.11
Aug 24, 2009So tried to open a dmg driver (trusted source - Epson) and wouldnt open, DiskImageMounter would not load any way i tried, so tried to open Disk Utility and that's not working either. Both show same source of problem in Logs. As per another forum a is opped out said file with the same from another machine with same OS. Still no joy. Next stop Target Disk?
'OS Version: 10.4.11
Command: DiskImageMounter
Path: /System/Library/CoreServices/DiskImageMounter.app/Contents/MacOS/DiskImageMounter
Library not loaded: /usr/lib/libbz2.1.0.dylib
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
Reason: image not found'
'OS Version: 10.4.11
Report Version: 4
Command: Disk Utility
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
Reason: image not found'
Intel Mac :: Disk Utility Won't Launch
May 16, 2012This might be a coincidence but I set up a new 2Tb Time Capsule today and assumed all was working as planned. I setup Time Machine to refer to the Time Capsule drive and the backups have been performed in keeping with the schedule etc. My issue is that for some reason the Disk Utility doesn't display. The icon will bob in the dock and then after that nothing happens. Like I said, coincidence? Latest OS X Lion 10.7.4 with one External HD attached and working as expected. In fact I used the Disk Utility only two days ago to format said external drive.
Info:
iMac, Mac OS X (10.7.2)
MacBook Pro :: Unable To Burn DVDs Back Up Snow Leopard .dmg In Toast 10 Or Disk Utility?
Jan 14, 2011I am getting errors when I attempt to burn my back-up Snow Leopard .dmg in Toast 10 or Disk Utility. Is my superdrive faulty? Here are my error messages.
View 4 Replies View RelatedOS X :: Disk Utility Now Allowing Me To Erase My Hard Drive - Way To Install Leopard
Aug 15, 20091. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies View RelatedOS X V10.6 Snow Leopard :: Disk Utility Crashes Every Time When Trying To Run
May 30, 2012My Macbook (late 2008 aluminum unibody running Snow Leopard 10.6.8) is having a plethora of problems - Spotlight won't return any results, I can't get any .dmg files to mount, and software updates can't be installed. Many of the solutions I've found involve running Disk Utility, but every time I try to open it, it crashes.
Here's the log file I get:
Process:Disk Utility [52987]
Path:/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk
UtilityIdentifier: com.apple.
DiskUtilityVersion: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
[Lig] .....
Info:
Macbook 5.1, Mac OS X (10.6.2)
OS X Leopard :: Using Disk Utility / Verify And Repair Grayed Out, Using Startup Disk
Feb 28, 2009 I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
OS X V10.6 Snow Leopard :: Disk Utility Not Reporting Space Correctly?
Feb 27, 2012I often add very large files to my system before compressing them, sending them to clients, and then deleting them. This process leaves me constantly thinking about how much disk space I have free. Disk Utility, and an Apple approved app called DaisyDisk (space visualization) typically help me accompish this. Sadly, as of this week I seem to have a problem. When I went and looked the other day Disk U was telling me that 250gb of my 320gb drive is in use. This seemed high to me, but to be safe I thought I'd delete some files I didn't need. After deleting a bunch of videos, and a backup of my Main Identity (19gb) from my system, I'd assumed I had freed up about 24gb, but when I went back into Disk U it was still showing the same 250gb in use. Yes I rebooted my system, and made sure the trash was empty.
As I investigated further I did a get info on all 6 folders on the MacHD and they added up to about 170gb. That seemed more realistic, so I did a get info on my MacHD and again it showed the same thing 170 in use and 148.something available. Note: I have no partitions on this drive. But yet, still when I go to Disk U it seemed to be stuck at only 64gb free. Today when I went and looked again I am still seeing the same amount in use and free on the MacHD get info, but on Disk U now I am seeing 108 free and 211 in use. Why the difference? I would think Get Info was pulling from the same place as the mac disk utility.
Info:
MacBook Pro 15", Mac OS X (10.4.7)
OS X V10.6 Snow Leopard :: Using Disk Utility To Password Protect Folder?
Mar 27, 2012I have used Disk Utility to attempt to password protect a folder but its not working for me. I go to FILE>NEW>DISK IMAGE FROM FOLDER I then highlight the folder I want to password protect and click the IMAGE button.In the window that pops up, I then select 128 bit encryption and leave image format on COMPRESSED.Then I enter and verify the password I want to place on the folder and hit OK.The resulting disk image appears to have been modified, but when I double click on the supposedly password secured folder, nothing happens. The folder doesn't open, nor does a window pop up asking for a password.I'm running snow leopard.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.53Ghz Core Duo 500 GB HD
OS X V10.6 Snow Leopard :: Password Protect Drive Using Disk Utility
Apr 8, 2012I've got an external har drive that i've been using for the last 6 months as my time machine back-up. I've used the disk utility in the past to create an image and password protect my drive that way. But.is there a way i can use the same process for a drive that already has content on it? Can i password protect my drive using the disk utility which will password any current content as well as any future content?
ps - im using 10.7.3
Info:
Mac OS X (10.7.3)
OS X V10.6 Snow Leopard :: Running Disk Utility - Mac Boots Up Normally While Holding C
Jun 14, 2012I want to run Disk utilities on my mac. Have done this before using system disk and holding C etc.Since upgrading to Snow Leopard from Leopard it no longer sees my system disk.Restart holding down C with system disk installed...and mac just boots-up normally!Ultimately I want to run the disk utility to check that the Hard Drive is healthy after install.
Info:
PowerMac, Mac OS X (10.6.8), 2x3 Ghz Dual-Core Intel Xeon
OS X V10.6 Snow Leopard :: Using Disk Utility To Verify Or Repair Disks?
Jun 16, 2012on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
OS X V10.6 Snow Leopard :: Snow Leopard Install Disk Works In IMac But Not In MacBook Pro?
Mar 31, 2012I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
OS X :: Resize Volumes Partitions With Disk Utility Under Snow Leopard 10.6 10A432?
Sep 4, 2009I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedOS X V10.6 Snow Leopard :: Disk Utility - Won't Repair Flash/Thumb Drive?
Mar 10, 2012So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
OS X V10.6 Snow Leopard :: Startup Disk Utility Missing From Preference Panel
Jun 15, 2012I recently realized that I no longer have the Startup Disk preference pane in the Preference Panel. I sometimes boot from other drives and now I'm forced to hold down the option key at restart or startup instead of being able to select the startup drive through the Startup Disk pane.
MacMini 1.66 GHz Intel Core Duo
2GB 667 MHz DDR2 SDRAM
Mac OS X 10.6.8
Info:
Mac mini, Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: Transfer Time Machine Backups Without Disk Utility
Jun 24, 2012In order to use Lion’s encrypted (Core Storage) external drive feature, I needed to reformat an external 1TB drive with Apple Partition Map, as that works only with GPT. The only partition was HFS+J formatted and was used as Time Machine Backup, which I wanted to preserve.
Act I:
I connected the drive to another iMac running 10.6 which happened to have enough space on the internal HD. I read this article http://support.apple.com/kb/HT5096 , which describes how to copy the BackupDB just by drag and drop. In hindsight, that was a bad idea, I should have created a disk image like suggested elsewhere, but if Apple itself suggests it, it can’t be so bad right?
So I just dragged the whole BackupDB to random folder on the iMac (after enabling ownership), and apparently it copied correctly the dir-hardlinks, as the resulting folder had the same size.
It seems that the Finder activates a special dir-hardlink aware copying mode when one does this. This is also confirmed by the fact that the Finder will refuse to copy the BackupDB together with other files, you have to drag and drop the BackupDB only.
Act II:
I reformatted the external drive as HFS+J with GPT and activated ownership.. But now, when I try to copy the BackupDB back, it continues to count indefinitely the number of files to copy! I speculate that the special dir-hardlink aware mode is not activated, but what can I do? How can I trigger it? Is there some hidden command line tool which handles this?
The lesson I’m drawing from this is: use the method described in the article only if you copy the backupDB from your old to your new drive.
Info:
Mac OS X (10.6.8)
OS X V10.6 Snow Leopard :: Backing Up MBP To Time Capsule - Disk Utility Stop Verifying HD
Mar 9, 2012I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error:Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
View 2 Replies View RelatedOS X :: Disk Utility From Install Disk?
Jan 11, 2009I purchased my Macbook Pro just over a year ago with Tiger as the OS. Since then i have purchased leopard with a buddy and installed it on my computer. And lent my Tiger OS install disk to a friend of mine. Im trying to partition my disk with bootcamp but it errors and tells me to fix it using the Disk Utility.
View 1 Replies View RelatedMacBook Pro :: New Hard Drive - How To Install Snow Leopard Without Disk
May 10, 2012My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Info:
MacBook Pro (13-inch Late 2011)
MacBook Pro :: Hard Drive Put In It But Still To Install Snow Leopard Without A Disk?
May 10, 2012My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible? and easiest.
Info:
MacBook Pro (13-inch Late 2011)
MacBook :: Update Operating System To Snow Leopard / Disk Is Not Reading In Disk Drive
Jun 4, 2014I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
Mac Pro :: Install Snow Leopard From Other Installed Disk?
Nov 30, 2010I work in an office where we've picked up a few new MBPs. These machines have Snow Leopard and I'd like to install it on my machine running Leopard. Is there any way that I can install 10.6 on my machine using the Disks that came with the new machines?
View 1 Replies View RelatedOS X :: Snow Leopard Install - 1 Disk - 2 Machines?
Sep 1, 2009Does anyone know how many machines I am legally allowed to install 1 copy of snow leopard on?
What powers do apple have to trace 1 copy installed across multiple machines?
