My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
View 3 RepliesI have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdriveÂ
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
Our iBook G4 won't recognize DVDs. It reads CDs fine, and I just upgraded the OS to Tiger and it read that DVD as well. However, when inserting a regular DVD (movie, etc., original copy, not burned) it says "this disc contains no volumes recognized by OS". I reinstalled the original OS and software, upgraded to Tiger and have reset the computer and checked the system preferences to make sure it wasn't set to ignore DVDs. The player worked in the past, not sure what is going on.
View 2 Replies View RelatedMy husband and I bought the family edition of Leopard last night, along with iLife08. I installed iLife while he installed Leopard. No problems on either Mac.
However, when I went to install Leopard, once I double clicked to start the install, it seems like my Mac won't "read" the disk. I get the spinning rainbow and there's lots of chugging sounds happening, but after almost an hour (yeah, I'm patient), it was pretty apparent that nothing was actually happening.
I'm really perplexed...it's not a disk problem, as it installed fine on my husband's Macbook...and it's not a drive issue as iLife installed just fine a few minutes before trying Leopard.
I was trying to import a cd into my macbook pro this afternoon and it went in and clicked into place but then started making a huming sort of noise, but was you could hear it was not spinning, about 20 seconds later it ejected. I tried it multiple times and restarted my computer but nothing seemed to help. The disk drive isn't bent out of shape or anything and I've never had a problem with it until now.
View 1 Replies View RelatedMy Pro has stopped reading any disks.
View 2 Replies View RelatedBasically, my friend got his new MacBook Alu for Christmas, but currently all the hard disk is doing is reading constantly, even when he has nothing running.
View 2 Replies View RelatedI have noticed a lot of disk activity reading and writing, it maxes out in bursts up to a couple of minutes at a time and overall seams to be reading and writing a lot of the time, with no processor activity at all. There is no obvious culprits in the activity monitor but terminal displayed large number of read and writes for mds, but spot light is not indexing (no dot in Mag glass) and this has been happening from months now.
Possibly longer noticed it when recieved replacement drive due to crook seagate, may have been doing this but could not hear it. Running last Snow Leopard on iMac 27 mid 2011 i7 custom with 8 gb of ram. also should note this unit has had load of issues Bad Ram, some software problems would not sleep (software) none of which have ever manifested on any of my other (older) macs. Also have noted that this drive activity does seem to coincide with using safari on occasion??
Info:
iMac (27-inch Mid 2011), Mac OS X (10.6.8)
I am in the process of pulling the data off of my collection of floppy disks. A lot of them are the really ancient 800K kind so I am using a Mac Classic II running System 7.0.1 to access them. The process is going well but occasionally I've run across a PC formatted floppy that the Mac won't read. It just says: This disk is not a Macintosh diskette. Do you want to Initialize it? So how do I give my Classic the ability to access these PC format diskettes?
View 3 Replies View Related I've got a 2 year old Macbook running on OS X 10.5.8. I've been having this problem with my computer and it's hard to explain...
I went to go install Google Chrome but then the site reads:
"Your operating system is not supported.
Google Chrome is available for Mac OS X 10.5 or later, Intel only".
I have 10.5 or later and my mac is intel based.
I attached the SSD via USB and formatted it in Disk Utility then replaced the stock HDD with it and booted from the 10.6 DVD. The drive was not found by the installer. I opened the Disk Utility from the 10.6 DVD and the SSD was not found.I opened system profiler and it was not listed under the SATA devices.I then removed the SSD, replaced the stock HDD and booted into 10.6. I attached the SSD via USB and installed 10.6 to it that way. I then replaced the HDD with the SSD and powered the MBP on. It booted to the 'Drive Error' graphic (blinking folder with a question mark).
View 2 Replies View RelatedI inserted a DVD-R into my iMac (which I know contains pictures, viewed on PC) but it only recognizes the disk as being blank. My machine responds exactly as I assign it to when a blank disk is inserted so I'm assuming the problem is not with my iMac but rather the format of the disk. I do not know which platform the disk was created with nor the type of machine. However, as I stated, I do know for a fact that this disk contains photos as Ive viewed them on a PC.
Info:iMac, Mac OS X (10.7.3)
I connected Lacie Backup Disk and used Time Machine to select the disk. But then a warning popped up telling me to eject the disk properly next time before disconnecting it, even though I never disconnected the device. Now time machine does not even recognize it.
Info:
Mac Pro, Mac OS X (10.7.4)
I'm using a firewire external case (no-name) with an IDE hard drive and IDE DVD burner. I'm pretty sure I did this before: hooked up 2 IDE devices to the external case (Master/Slave or Cable Select jumper settings - can't remember) and I'm pretty sure they were both recognized. Or maybe I was insane at the time. I've been trying it with 2 different external cases, IDE cables, etc and I simply can't get the second drive to be recognized. I thought all IDE controllers recognized 2 devices (Master/Slave). These are modern enclosures so maybe the IDE controllers have changed and they have eliminated a feature that was almost never used?
View 2 Replies View RelatedI recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
View 2 Replies View RelatedI am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies View RelatedI have a situation which seems somewhat unique to what my searches have uncovered. I have a powerbook g4 that will not recognize the install disk it came with. The version is 10.2.7
The Powerbook was working just fine with 10.4.11 when I tried to downgrade Quicktime using Pacifist. I must have done something wrong because the Powerbook turned into a brick. I was able to boot onto my tower G5 and back up all my important data, I then reformatted the drive to mac os journaled and zeroed it. The problem I am having is that when I try to boot from the original install disc I get an error on gray screen that says "You need to restart your computer" Sometimes it doesn't even get this far, it just shows the apple logo and then the screen goes buggy and the machine powers down.What I currently have at my disposal is a G5 tower running 10.4.10, three 10.3 install discs that came with the tower, a burned copy of 10.4, and the Powerbook's original 10.2.7 install disc.
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognize de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
Info:
MacBook, OS X Mavericks (10.9.5)
My MacBook Pro (15-inch Core 2 Duo) no longer recognizes it's hard drive. Placing a different hard drive doesn't work.
It won't boot off the system DVD.
It does power up, but all I get is the gray screen with the flashing question mark.
I recently purchased a MBP and a Time Capsule. Still waiting on the MBP, but went ahead and set up the TC as a router for my current Dell laptop. In theory, I don't really care since I will have my MBP w/in 2.5 weeks, but is it possible for my Windows machine to see the disk on the TC? I went into TC and set up the workgroup name to be the same as the workgroup on my PC, but I still don't see it. I doubt anyone has done it, but was curious if it's possible. I assume that the Windows client should be able to access that giant disk (or a Windows user would never buy the product). One question though, it shows the filesystem as FAT32. Is that right, or just how it's represented to the Windows client?
View 19 Replies View RelatedI am running OS 8.6 and have installed the iomega ware for classic on it (I believe the driver is 6.2.3). The drive will power on when I insert the drive. The drive is recognized by the Iomega Tools but will not recognize when a disk is inserted. The drive does not even try to spin up when a disk is inserted. Iomega tools says no disk is inserted. The only way to eject the disk is to put a paperclip in the "emergency eject" hole.
View 3 Replies View RelatedI am going to install a new SSD drive on my MBP mid-2009. After it is installed, can I then start up computer and then insert the DVD Install operating system disk, or do I install the DVD install disk, then shut down computer and swap the HD drive? I know that I will reformat the disk when Installer begins, but I want to know if the computer will recognize the install disk with a new blank HD in place.
View 7 Replies View RelatedMy macbook hard drive crashed, luckily I had just backed up everything. I went and bought a new 320 GB hard drive, I researched and I know it's compatible with my Macbook. I decided to install windows 7 on it first, but the windows 7 installer wouldn't recognize my hard drive. (For the record, my Matsushita superdrive will not read DVDs anymore, only CDs, so I created bootable copies of both my Mac OS X install disk and my Windows 7 install disk, and I've been using a bootable rEFIt CD to boot from my USB flash drive.)
So I booted up the Mac OS X Snow Leopard disk and started disk utility - it recognizes the rEFIt CD, it recognizes the flash drive, but no internal hard drive. The partitioning tool in rEFIt doesn't recognize it either, but I know it's seated correctly because I can hear/feel it booting up with the computer (if i remove the battery and boot with the computer plugged in). I also know it works correctly because I installed it in my girlfriends PC and it recognized it just fine, I even installed Windows 7 on it, hoping the macbook would boot from it.
I have a MBP and I want to upload pics onto it from my SDcard from my camera. I put it into the memory card slot and i dont think it is recognizing it? Im not really sure what to do
View 24 Replies View RelatedI recently tried to upgrade my original 160GB HDD to a 500GB Scorpio Blue. I formatted the drive to HFS+ and installed Lion on it while it was in an USB enclosure.When i restart the computer, HDD boots off of the enclosure and it is fully functional and I can view it and my original drive.However, whenever I take my new HDD out of the enclosure and install it into my mbp all it gives me is the flashing ? error and it is not visible in boot utility either. I've tried everything I can think of to get this to work. I don't believe it is the HDD seeing as it can boot off the enclosure. What exactly are my options to fixing this issue?
Info:
MacBook
Pro, Mac OS X (10.7.1)
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
I have this issue in both macs I own, a 2010 MBP, and a 2012 Mac mini. After I upgraded to yosemite, Time Machine will not find my backup disk. I have been using the same network attached storage drive for 4 years for time machine backups. I has worked fine with all the macs I've owned until now. I can see the disk in Finder, I can go to disk utility and mount the Time Machine disk, but when I go to Time Machine preferences and try to select the list, the disk is not listed there, even though is mounted.
View 3 Replies View RelatedMy hard disk is a Raid system. 4x3TB = total 12TB but 3 TB is for backup. So in effect usage space is 9TB. But now used up 7TB (called it original harddisk) I took my iMac to a shop and it dis some verify and tried to repair the disk using Disk Utility. But it cannot repair. Apparently, he said that my hard disk is okay but it has a directory corrupt problem. That is why now my FCPX cannot read all the data. All my media files for FCPX are stored in this 9TB external hard disk. So, I was told the steps to do are:Â
1)Â copy all these 7TB data from Original hard disk into a new hard disk (called it haddisk B).Â
2) Then reformat the old 9TB hard disk (which we earlier called as original hard disk).Â
3) Then I copy back from hard disk B into Original Harddisk 9TBÂ Question is will FCPX be able to recognise again my media files from the Original hard disk in
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
I have a mid-2010 iMac. Recently, it has failed to mount DVDs, either video or data, on a reliable basis. I have been able to work around it by restarting my iMac, but that doesn't always work.
Info:
iMac, OS X Mavericks (10.9.4), mid-2010 model
I just got a Power Mac g4 from my school and i dont know much about it but it didn't come with an operating system. I bought a full retail version of mac os x and pop the disk in and it will only eject the disk. I tried holding option when its installing but the computer wont recoginize the disk it will only eject it.
View 5 Replies View Related