Hardware :: Can Windows Recognize Time Capsule Disk?
Mar 8, 2008
I recently purchased a MBP and a Time Capsule. Still waiting on the MBP, but went ahead and set up the TC as a router for my current Dell laptop. In theory, I don't really care since I will have my MBP w/in 2.5 weeks, but is it possible for my Windows machine to see the disk on the TC? I went into TC and set up the workgroup name to be the same as the workgroup on my PC, but I still don't see it. I doubt anyone has done it, but was curious if it's possible. I assume that the Windows client should be able to access that giant disk (or a Windows user would never buy the product). One question though, it shows the filesystem as FAT32. Is that right, or just how it's represented to the Windows client?
View 19 Replies
ADVERTISEMENT
Mar 20, 2012
MBA suddenly doesn't recognize printer on time capsule network even though MBP still prints to it on network all 10.7.3
Info:
imac, MBP
View 1 Replies
View Related
May 12, 2009
I recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
View 2 Replies
View Related
Jul 9, 2010
I am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies
View Related
Mar 5, 2009
Looking at Apple's site, they really promote the feature on the AE page, but it's not mentioned on the TC page....
View 1 Replies
View Related
Oct 1, 2009
I have a 1st gen 500GB Time Capsule. The capacity was good when I bought it, but right now 500GB just wont do it for me. So I want to buy a 2TB bare drive and switch out the original 500GB drive. I have done some research on google, and it seems to be doable. But I find some people say that the 1st gen TC would not recognize drives that are bigger than 1TB.
Just want some feedback from people who have done this. Is 1TB really the cap for the 1st gen?
View 2 Replies
View Related
Nov 18, 2009
I just got my new i5 iMac. I have migrated my data to the new computer. Can I erase my time capsule so as to start fresh? If I can, do I erase it with disk utility? Is this even a smart thing to do?
View 11 Replies
View Related
Nov 19, 2008
how to have the Time Capsule disk automount on Startup?
What about a USB drive connected to it?
how to use the Time Capsule disk as a server?
View 1 Replies
View Related
Dec 12, 2014
I have this issue in both macs I own, a 2010 MBP, and a 2012 Mac mini. After I upgraded to yosemite, Time Machine will not find my backup disk. I have been using the same network attached storage drive for 4 years for time machine backups. I has worked fine with all the macs I've owned until now. I can see the disk in Finder, I can go to disk utility and mount the Time Machine disk, but when I go to Time Machine preferences and try to select the list, the disk is not listed there, even though is mounted.
View 3 Replies
View Related
Sep 8, 2010
I just secure erased my Time Capsule disk through AirPort Utility to set it up with my new iMac. After erasing the 1TB disk, AirPort said that the disk capacity is only 931GB even though the Time Machine preferences displayed 998GB available prior to me initiating the first backup. Does anyone know why this discrepancy exists? It should be noted that the previous backup on the Time Capsule disk from my old Mac took up about 68GB so is AirPort Utility just struggling to show the new capacity after the secure erase?
View 18 Replies
View Related
Aug 10, 2008
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
View 24 Replies
View Related
Mar 11, 2009
Is there an option for Time Capsule to back itself up to another disk? Is this automatic?It just seems dumb to store everything on Time Capsule if it has the same failure rate as a hard drive with no redundancy even though apple says its server grade.
View 7 Replies
View Related
Mar 14, 2009
In trying to do my first backup with my new time capsule but keep getting this? The time capsule disk image is showing up in the desktop. How I can get this working?
View 3 Replies
View Related
Oct 2, 2009
I deleted some files that I don't need in Time Capsule by using "Delete All Backups of ..." inside "Enter Time Machine", but the disk space does not change. It stays the same as before.
View 4 Replies
View Related
Dec 9, 2009
I bought a 1TB Time Capsule and setting up the wireless network was easy. I also added the printer and that works too. However, I am having problems sharing my External Seagate 500GB USB Hard drive. I have a USB hub and I connected it, and when I'm in Airport Utility, I click on Disks, it shows the 500GB Seagate!
However when I'm in Finder, I can't see the 500GB Seagate drive. And I launch Disk Utility, it doesn't show the drive.
How can I access the External USB Drive first of all? And enable it, for sharing via my Time Capsule's wireless network?
The thing is, Time Capsule detects my additional hard drive, but I believe it's not configured to enable using it.
Oh and yes, I checked the Enable File Sharing checkbox & secured it with a password. Airport Disk Guests Access is set to not allowed though. Should I change that? Share Disks over WAN is also unchecked.
View 8 Replies
View Related
Jun 13, 2012
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
View 1 Replies
View Related
Aug 30, 2008
I decided that I need to test my Hard Disk migration procedure today. I am going to put an Apple RAID card in and use 4 x VelociRaptors. I Have my current system booting from a RAID0 setup and as such it will be a pain (in the arse) when it comes to moving the partition to the RAID5 (not much room for disks inside etc). So I searched my cupboard for a 'spare' SATA drive, but alas all I found was an old Seagate Cheetah (15K SCSI) and some random IDE drives. Then it struck me - the Time Capsule has a 500GB SATAII disk in it.... mmmm my mind began to turn over.....and my hand reached for the screwdriver. So I googled for some pics (to help me disassemble the TC). I found this excellent set [URL]
1) remove the rubber base.
2) unscrew all the teeny screws.
3) invert the unit (so its on its top case).
4) lift the metal cover off (carefully as it has a fan mounted to it).
5) pull the foam cover from the heat sensor on the drive.
6) unplug the sensor from the clip on the base of the disk.
7) hand over the drive, invert again to make the disk 'fall' gently out of its casing.
8) un-invert and unplug the SATA data and power connectors.
9) re-assemble the unit.................
View 6 Replies
View Related
Jul 10, 2009
I mainly use it as a network media disk, the the problem is that it spins down after just 2-3 mins when idle which will probably wear it out quicker. So was wondering if there's a script of other method to keep it running for longer?
View 2 Replies
View Related
Mar 10, 2010
Anyone notice anything happening to their disk speed/transfer/access rates lately using a Time Capsule for a NAS?I currently use it to do two TM backups, and hold an iTunes store - been working amazingly well for over a year, and then a couple of weeks ago notice massive lags.The two Macs are using wireless, but internet speeds are as fast as ever... it just bogs down when you try to use a disk.So, couple other questions: Was there an airport firmware update lately that I installed incognito - and it's botched? Is there a way to install old firmware etc? Lastly, is there any way to run disk utility (or something like it) on a network drive like the Time Capsule? Maybe it's just clogged up or something?
View 1 Replies
View Related
Jun 16, 2012
I need to make space on my startup disk. I bought a Time Capsule. How do I move files from startup disk to my time capsule?
View 2 Replies
View Related
Feb 22, 2010
I bought a new 2TB Time Capsule, and had problems completing the initial backup. I finally sourced the problem to files that were buried deep in a stack of folders, which seemed to make the file name/path too long. Anyway before I realized that I tried to reformat the Time Machine, and this seemed to work ok. However Airport Utility is now reporting the Time Capsule Disk Size as being 1.8TB, rather than 2TB.
I think before I reformatted the disk it showed as being 2TB in this menu, but I cannot be sure. I am worried that I have somehow formatted it wrong and lost some data space? If I go into Disk Utility, it does say there that the Data partition is 2TB, so it seems strange that Airport Utility shows it at 1.8TB. Can someone else who has the 2TB Time Capsule let me know whether in Airport Utility it shows as being 2TB or 1.8TB?
View 9 Replies
View Related
Jun 20, 2009
I have been using time capsule for only a few weeks and I have noticed that the file it has created "Elliot Newman's MacBook Pro_001b63936847.sparsebundle" only reads a file size of 95GB, when the disk I am backing up has 148GB used. Does this mean the backup doesn't contain all my files? I have to say it concerns me a little that the backup shows only a single file, is there anyway to see the files that time capsule has backed up? I am updating my MacBook soon with a bigger internal drive and I want to make sure all my files are backed up before I do this.
View 3 Replies
View Related
Jan 23, 2011
I was using a Western Digital 1T hard drive connected to my Time Capsule USB port. It was set up as Allow file sharing with Time Capsule password. I would like to stop using it here and directly connect it to my Macbook Pro (by firewire). When I try to do this, I can see the drive but get a message that I do not have user permissions to access it. I can't seem to figure out a way around this. Is there something that I can change so that I can directly access the disk? Do I need to reformat the WD drive in Disk Utility to be able to use it directly again?
View 1 Replies
View Related
Mar 9, 2012
I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error: Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
View 2 Replies
View Related
Feb 23, 2010
Does the time capsule work with Windows 7? I'm using genie time machine at the moment which is really good but i wanted a wireless backup solution, i mainly use windows on my mac because i use 3ds max so its really for the windows side. Am i better off buying a decent NAS drive that i know will work for windows and try and get time machine to see it using the hack to get it to work or vice versa? Also can you upgrade the HDD in time machines?
View 2 Replies
View Related
Jun 21, 2010
I have hooked up a windows PC to my network, the system saw the TC HD but couldn't resolve with the password. I didn't have time to trouble shoot so I choose Ignore. Now I can't get the PC to bring back the screen to try and connect to the TC. Any help restarting the service to get this back on-line?
View 1 Replies
View Related
Jul 17, 2010
I have a problem with my TC, i read every thread here and in other forums. I spent Days and nights try to figure it out but with no luck at all. I desperate here as i just paid $500 to buy the TC and isn't working.
The Problem:
1.I configured my TC many times with all possible configuration, the airport is working fine (LED always GREEN) but whenever i try to access the HDD it gives me: Username/Password Error, Netbios problem (Win 7) OR Semaphore timeout period expired (Win XP)...
2.When I restart the TC or the LinkSys It works one time perfectly but as soon as i change anything on TC or restart the computers cannot access again.......................
View 1 Replies
View Related
Nov 29, 2010
I'm getting a new 13" MBA, upgrading from a 2006 macbook. I have it all backed up to time capsule. Can I just connect the MBA to my time capsule and restore the macbook image?
View 6 Replies
View Related
Jan 20, 2009
I am having trouble getting a friend of mine's setup to work. He's got an HP Photosmart C4480 (usb to Time Capsule) It prints fine from his macbook, but not at all from his wife's PC (laptop with XP). The PC will print fine if i directly connect the printer (usb) to the laptop (but that kinda defeats the point). I tried changing the address from time capsule.local to the ip address of the time capsule (found that suggested somewhere online) and that didn't work.
Not sure if it was before or after the above, but it worked *once* when I had the laptop connected to the TC via Ethernet (which, again, kinda defeats the point). I also tried configuring a plain generic TCP/IP printer port and setting up the printer that way (bypassing Bonjour) but it didn't work. (EDIT: Just saw a guide linked, not sure if I chose Custom Settings for the Network card - will try that first when I go back over - would still love to know if there are any other things I could be trying.) What other things can I try with the hardware they're using?
View 5 Replies
View Related
Jun 10, 2009
I know that firmware 7.4.1 has caused problems for people using Time Capsules with Windows PCs: [URL] I know that this problem affects the original TCs as I actually have an original TC and I had the problem with firmware 7.4.1 (fixed by downgrading to 7.3.2). Does anyone know if the problem with 7.4.1 only affects the older TCs or does it affect the new updated TCs (released earlier this year) as well? I want to buy another TC, but not if it has the 7.4.1 problem and not if it can't be downgraded to 7.3.2.
View 1 Replies
View Related
