Software :: OS Won't Boot Consistently?

Mar 19, 2009

I have a Intel MacPro, sometimes when I restart I just get a grey screen, and If I try a few times it will boot up, but it takes a long time.

View 1 Replies


ADVERTISEMENT

MacBook :: Trackpad Clicks Not Registering Consistently - Especially After Wake Or Boot

Mar 9, 2009

My MacBook had the trackpad clicks-not-registering problem that was cleared up by the Trackpad Firmware Update in November. Unfortunately, a variant of that problem seems to have surfaced. When waking from sleep or on boot, roughly half of the trackpad's clicks won't register, forcing me to click two or more times to start an app or read mail. After five or ten minutes, the problem seems to abate. I still "lose" clicks now and then, but not as often. Note that other trackpad functions seem unaffected when this happens.

I've tried resetting the SMC (no effect) and PRAM. Resetting PRAM cleared up the problem but only briefly, and now it's recurring.

I took the MacBook to the Genius Bar and the Genius suggested I use "tap to click" instead, but while that works, I'm a sloppy clicker and found that setting irritating.

View 5 Replies View Related

OS X :: Discs Not Mounting Consistently?

Oct 31, 2007

Ever since installing Leopard, I've noticed it is having problems consistently mounting discs, specifically my external USB drive (for Time Machine). Sometimes I plug it in and it shows up as a disc on my desktop (and viewable within Finder and by Time Machine); other times I'll plug it in an it doesn't show up any where (even after restarting OSX).

Not sure this is related, but I also noticed that a .dmg file I downloaded failed to mount (just got an error message). This time, when I restarted OSX when I tried launching it again, it worked.

View 7 Replies View Related

IMac :: Consistently Logged Out Of Websites?

Jan 24, 2009

For some reason, I keep getting logged out of websites. I logged into a website today and clicked the "Remember me" option and the next time I went to the website (a few minutes later), I was logged out. This is happening on all websites, including this one, almost on a daily basis.

View 3 Replies View Related

MacBook Air :: Are There Consistently Good Screen Rev Bs

Feb 25, 2009

I am planning to order the air so I won't be able to check out the screen as I ll be having it shipped to me, so I was wandering, is it worth the risk due to the screen problems or should I play it safe with a mbp? Have apple started releasing screens with marked improvements or are we still seeing the problems with lines of the earlier batches.

View 24 Replies View Related

Safari Not Clearing Cache Consistently

Mar 3, 2012

Safari 5.0.5. MacOS 10.6.8..I am developping complex HTML+JavaScript. I notice that after a while (~30 mn) Safari does not clear its cache and re-uses old JS scripts. I have caches disabled in the development menu. Clearing cache or reinitialize Safari from the Safari menu is of no help.Only way is to delete the cache.db file in Libray/cache/com.apple.safari, exit Safari, empty trash, then relaunch !

Info:
iMac, Mac OS X (10.6.8)

View 4 Replies View Related

Safari :: It Keeps Crashing Every 15 Minutes Consistently

Apr 11, 2012

My safari keeps crashing every 15 minutes, consistently, no matter what site or page im on.

Info:MacBookPro

View 1 Replies View Related

Applications :: Handbrake Crashes On IMac Consistently?

Nov 17, 2009

I have a iMac and a Macbook (unibody before they became "pro"). Both are 2.4Ghz models with 4Gb of RAM. I think the iMac has a slower system bus, but they are pretty close otherwise.

I can rip DVDs and convert videos on the Macbook all day long without problems. But Handbrake always quits unexpectedly on the iMac. I have downloaded the latest version of Handbrake, uninstalled several times, and totally leave it alone while running Handbrake. Nothing prevents this from happening.

Does anyone know what could be causing this problem or another (free) program that will do what Handbrake does as easily? I officiate basketball and I have a lot of friends who are asking me about pulling clips from game DVDs. With Handbrake it is easy to rip the DVD and trim the clip using Quicktime.

View 2 Replies View Related

MacBook Pro :: Its Consistently Loose Internet Connection

Jun 10, 2012

Often my MPA and/or my friends MBP drop Internet connection! The only way to get it connected again is to restart it over and over again.

Info:Mac OS X (10.7.2)

View 1 Replies View Related

IMac :: New I7 Quad Core HD Temps Consistently 50 Degrees

Dec 22, 2009

My hard drive temp is averaging around 50˚ (Celsius) isn't that just a little hot?

View 8 Replies View Related

MacBook Pro :: System Runs Hotter Consistently / Updated To 10.5.8

Feb 12, 2010

I have a 2.8ghz macbook pro running leopard and after finally downloading the latest software update bringing me to 10.5.8 I feel it's running hotter nearly all the time.when simply using garageband, my MBP never usually ran hotter than 125 F, but after the update it runs at 180 constantly in garageband. could the update have done anything to make this happen, it's the only change I can think of

View 2 Replies View Related

OS X V10.7 Lion :: Why Isn't Disk Usage Reporting Properly Or Consistently In It

May 4, 2012

I have an Early 13" MacBook Pro It seems that for some reason the Disk Utility is the root cause and I'm guessing that System Information queries Disk Utility for it's information while Finder does its own query. Maybe? At any rate I'd really like to resolve this issue if at all possible.

Info:
MacBook
Pro, Mac OS X (10.7.3), 500 GB hard drive.

View 3 Replies View Related

OS X Mavericks :: ICloud Mailbox Rule Not Working Consistently?

Jun 17, 2014

A rule I use to try to remove a set of emails from a yahoo group into their own mailbox - NOT  a smart mailbox as I want them OUT of Inbox - seems to be hit n miss.  Some - the majority of messages - are moved as required but most days some (more or less) don't get caught. 

Info:
MacBook Pro, OS X Mavericks (10.9.2), & iPhone 5/5c, iPad-mini/iP-m 2

View 2 Replies View Related

OS X V10.7 Lion :: Quit Message Consistently Occur After 6 Minutes Of Inactivity?

Feb 4, 2012

I have been receiving the shut down signal continually every ~6 minutes now for two weeks. Apple care is unable to fix the problem....did the OS reload, and other permissions fixes without success.

Info:
MacBook Pro, Mac OS X (10.7.2)

View 6 Replies View Related

OS X V10.6 Snow Leopard :: Some Apps Consistently Crash On System Restore

Mar 23, 2012

Some apps consistently crash on system restore

Info:
MacBook, Mac OS X (10.6.8)

View 4 Replies View Related

OS X Yosemite :: Why Action Buttons In Dialog Boxes Not Consistently Colored

Dec 6, 2014

Ever since installing Yosemite, I've been bugged by a design choice somebody made for dialog boxes. The trouble is that it doesn't seem to have rhyme or reason.  (I know there probably is a reason; I just can't figure it out.) Many dialog boxes are just fine; easy to read, with black on white or white on blue action buttons.  

Black on blue for an "OK" or "Choose" button.Especially for those of us who are about half to fully color blind, there is almost no way to distinguish between the two.   Does Apple have no color blind people to act as the conscience of the folks who actually make these kinds of design choices? 

I've tried changing system colors to no avail. Is there some way to complain about this other than a bug report? this is of course not a bug, as the program is functioning the way it was designed.   It's just a very poor design. 

Info:
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Yosemite (10.10.1)

View 3 Replies View Related

Power Mac :: Vertical Lines Are Displayed Consistently On Desktop And Software Apps?

Apr 13, 2012

Vertical lines are displayed consistently on desktop and software apps.  How do you remove them?

Info:
iMac, Mac OS X (10.5.8)

View 2 Replies View Related

MacBook :: Slow WiFi On Macbook But IPhone Consistently Showing 2-2.5MB?

Sep 9, 2010

I am running an approx 2 year old Macbook on my wifi network and have noticed that the download speeds are very slow all of a sudden.Testing with speedtest.net I am only getting 0.5MB/s compared to normal speeds of 2.5MB/s.I don't think it's the router because my iPhone is consistently showing 2-2.5MB/s.I have run software update to ensure everything is up to date.

View 1 Replies View Related

Mac Pro :: Unable To Boot / Kernel Panic At Boot And Graphics Card Failure

Mar 9, 2008

Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.

So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.

What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.

View 21 Replies View Related

IMac :: 27" Wont's Boot Up / Takes A Very Long Time To Boot?

May 15, 2010

I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM

In the second week the boot up times became very slow.

I would turn the machine on and get the chime within 5 seconds or so.

Then just a black/blank screen.

Eventually after about 10mins I would get a white screen then it would boot up normally.

Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).

I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.

I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.

But now when I switch it on just darkness.

I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.

View 3 Replies View Related

OS X V10.7 Lion :: Apple Macbook Boot It From Usb Or Firewire External HDD Or Usb Stick, Which Of 3 Better Must Boot

Mar 25, 2012

MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?

View 14 Replies View Related

MacBook :: It Won't Boot After Trying To Repair With Disk Utility, Cannot Boot In Safe Mode

Jun 11, 2012

I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.  

I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc". 

I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy. 

Info:
MacBook, Mac OS X (10.5.6)

View 3 Replies View Related

Intel Mac :: Boot Partition Error Message - Mid 2010 I7 Will Not Boot Past The Apple Logo

Apr 8, 2012

My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok.  

Info:
iMac, Mac OS X (10.7.3)

View 7 Replies View Related

Power Mac G5 :: Cannot Boot From DVDs - Defaults To External FW Boot Drive With 10.3.x

Dec 20, 2007

This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.

Information:
G5 Dual 2GHz
Mac OS X (10.4.3)

View 4 Replies View Related

MacBook Pro :: Boot From External Firewire DVD / Optibay-Boot Camp?

Oct 13, 2010

Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...

Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.

Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...

View 8 Replies View Related

PowerPC :: IBook G4 Won't Boot Past Apple Screen & No CD Boot

Jun 11, 2007

I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.

View 6 Replies View Related

OS X :: Slow Boot After Installing Windows Vista Using Boot Camp ?

Dec 25, 2008

This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .

I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .

Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.

And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .

So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.

And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )

View 4 Replies View Related

OS X :: How To Make Boot Camp OS Selection Default Boot Screen?

Sep 17, 2009

Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.

I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.

View 1 Replies View Related

Mac Pro :: Mac Pro Won't Boot / Kernel Panic At Boot Graphics Card Failure?

Oct 2, 2009

Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.

So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.

What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.

P.S. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.

View 7 Replies View Related

Software :: PowerBook Refuses To Boot And Ignores Boot Keys?

Sep 13, 2009

I have OSX installed on a very old Powerbook. Well it was working and then I left it for awhile and now it is giving me the good old folder to question mark screen (maybe someone dropped it?). Well I'm not much of a mac user so I looked up all of the different boot key commands and tried to boot from my OSX CD. Holding down C did nothing, and neither did ANY of the other commands except holding down option and that key command that restarts the computer (apple, option, shift, esc?). Anyway, I got into the screen that shows your hard drive and all other devices and it actually listed the CD drive so I clicked it and clicked the next arrow. I waited for awhile and then the screen reloaded (as if it was rescanning for removable devices) and then stopped and only displayed the local disk. What is going on?! It only sometimes displays the CD in this screen and the next arrow never does anything regardless!!

I really don't know any of the computers stats but if I were to guess they're pretty bad. All I know is it used to run OSX just fine and then other people used it and now it doesn't do anything.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved